VVDI Key Tool V2.3.9 Unlock BMW KeyLess Successfully

Xhorse Vvdi Key Tool remote maker updated to v2.3.9 successfully& tested as demonstrated below by the 1st owner of Vvdi Key Tool Mr. Mohamed Gulam, bmw KeyLess unlocked successfully as well for testing tool capabilities
Vvdi Key Tool Europe, Southeast Asia, Middle East, North America, India, English ( Eu, eu-en, se, se-en, me, me-en, na, na-en, in, in-en ) version finally announced for and released V2.3.9
Release Date 20th July 2017
Vvdi Key Tool Latest update Proximity Remotes / KeyLess Go Unlocking Diagrams added below.
There you go, when vvdishop.com said 86 type & model were added, we meant so for real, enjoy  and don’t forget to count them 
Download in PDF format via the link below.


VVDI2 make a dealer key on VW Transporter UDS System

If you have Xhorse VVDI2 VAG key programmer to add dealer key on VW Transporter/Caravelle T5 2011, but not work, you must read this post, the problem is finally solved.

Problem description:
VW Transporter/Caravelle T5 2011. Had an existing working key and used Xhorse VVDI2 to make a dealer key on a UDS cluster but something went wrong or more likely I did something wrong. It says 2-2 on the cluster and lights go off as if programmed but once cranked it starts and dies and the glow plug indicator light flashes. I stripped the cluster and tried with putting the cluster in to service mode but still much the same. With AD100 it says 2 keys coded and cluster in Mode 7. A friend came with his Zedfull and recoded in both keys and it said precoding ok but still the same issue. The dump of the original 24c64 and the backup I first made are attached and I’d appreciate any advice or help on this. Thanks everyone

Folder: Transporter T5

Config: This value contain car manufacture, key number, immobilizer status (new, learned, closed), keyless or not etc.

Your immo status is likely changed, did you press the reset immo button.
When did you made the 24c64 backups.
After entering service mode true obd, or after your keylearning procedure?

The initial backup (small file)was made before I made the key but I read the 24c64 only after it wouldn’t start. Any idea how to change the config from o7 to 06 again?

Instruction guide by senior:
go in to service mode by obd.
read immo data.
change the conf 7 in to 6.
press, write immo data.
press, reset instrument.
that should do it.

Finally! Solved
Thanks everyone. Yes it was me being stupid, I think I actually wrote the 24c64 complete file back instead of the smaller immo file. Did as advised and problem solved.


Xhorse VVDI Prog Programmer Feedback July 2017

Xhorse VVDI Prog programmer updated feedback in July 2017.

EZS VW Crafter
old version MC9S12DT256 (0L01Y) - read/write eeprom and flash OK
new version MC9S12XDT384 (1L15Y) - read/write eeprom and flash OK

cas4 1l15y R/W eeprom and flash okay
BMW FRM3 d flash r/w okay
E-series CA key write okay
W203 1J35D read / write OK cable v3
W639 545 02 08 (0L02M) W169 545 17 08 5L40K OK
W639 545 21 08 (0L01Y) W906 545 40 08 SPRINTER (0L01Y)

MCU V3 CABLE all good. 

A6 C7 door module D70F3626 reads OK!
A6 C7 Tailgate module D703373 read success! Had to increase the voltage to 4.7V!


How to Update Xhorse VVDI Key Tool English Version to V2.3.8

Original Xhorse VVDI KEY TOOL remote maker latest English version software V2.3.8 has been verified and tested working by Xhorse engineers.  The new upgrade software adds Toyota G chip, Chrysler 4D, Ford ID83 etc clone.

VVDI Key Tool V2.3.8 Update Feature [2017-07-16] 
* * * * * * * * * * * * * *
Firmware version: V2.0.2
Attention: This update only for North American or India English version(na,na-en,in,in-en). Other languages will be released on next week, please get Device Info to check language version.
This version must be updated with V2.3.8 and above. The upgrade may take about 30 minutes
1.transponder clone
+add chrysler 4D-64(4E) clone
+add toyota-G offline clone
+add hyundai ID-70 online clone(Use Calculate option in upgrade software)
+add ford ID-83 online clone(Use Calculate option in upgrade software)
+add ID-4A identify
2.generate transponder
+add toyota-G to generate special transponder
3.remote renew
+add more than 86 remote&keyless go prox unlock
4.remote prepare
*fixed XN serial keys problem on ID47 such as suzuki
5.add more vehicles data and fixed some bugs

Free Download VVDI key Tool V2.3.8:
mega link

How to Update VVDI Key Tool Software?

Select “Update” option on function menu
Go to VVDI KEY Tool SYS Set to update
Connect remote maker with PC via a USB cable
Click “Update Online” button to start upgrade
Wait for update completed



VVDI2 is not bind to any VVDI MB Tool device? How to solve

Error when verifying VVDI normal Sub-remote pcb:
VVDI2 SN VV20798267 is not bind to any VVDI MB Tool device!”
Xhrose VVDI (VVDI2, VVDI MB BGA Tool) Foreign Point System is not yet available. Wait feature update.


Xhorse VVDI2 BMW Key Programmer Reviews

Xhorse VVDI2 BMW version key programming tool, how does it work? Here are the user feedback on bmw vvdi2.

Xhorse VVDI2 BMW  is BMW professional key programmer tool that covers full functions of BMW Multi Tool,and which is better than Multi Tool. Software and firmware both online upgrade-able.
VVDI2 BMW includes BMW OBD and CAS4 authorization, and VVDI2 BMW software language: English, Italian, Spanish, Dutch, Hungarian.
VVDI2 BMW can support not only key programming,but also km,some can do via OBD,some need CAS Plus,some need by eeprom way,like CAS4,needs to use VVDI Prog to read eeprom data,then use with VVDI2 BMW.
Xhorse VVDI2 BMW Key Programmer Feedback:
1) Cars that I have successfully done with VVDI2
2005 BMW E87 CAS3
2006 BMW E90 CAS3
2003 BMW E60 CAS2
2010 Audi A5 with Keyless Entry
2011 Audi A3
2009 VW Golf mk6
2) I tested my vvdi2 on 2008 bmw m6 today. It worked flawlessly and was a bit quicker than multi-tool.
3) I did a perfect job on 2010 bmw X5 with ISTAP today. I downgraded CAS ( I backed up eeprom with xprog first) and then retrieved key info OK. Adding key was a brieze after that. Cleared all errors, synchronized ELV. DONE
4) Hi i yesterday have bmw f10 2012 year ,read cas4+, change, write back all ok work .happy 100%
5) BMW cars I have completed with VVDI 2.
– EWS 2
– EWS 3
– EWS 3+
– EWS 4
– CAS 2
– CAS 3
– CAS 3++ (ISTAP)
I think some people need to do more research before blaming tools.

Credit to VVDI2 BMW users from DK forum.


VVDI2 VAG adapt EDC16U1 ECU failed (Solution)

Xhorse VVDI2 VAG ECU adapt doesn’t work with EDC 16U1… Tried on Seat Toledo MY05 using VW Touran ECU. Finally I disabled immo but I want to adapt it to car…
not work because is tool old … working after 2007 (u34)
You can adapt that type of ECU via SCK
Use any u34 ECu from 2007 up and you will see.


Xhorse VVDI key Tool English Software update to V2.1.9

Good News!!! Xhorse VVDI Key Tool remote maker English version  software released to V2.1.9 (2017-07-06).

Free Download VVDI key tool V2.1.9 English Software

Note: The update tool is for VVDI key tool English version only, cannot work with Chinese version key copy machine.


How to decrypt VAG CS/PIN by Xhorse VVDI Prog

Good News!!! Xhorse VVDI Prog programmer new software version V4.5.9 adds KESSY(2008–) option

  (Need to use with VVDI2,support Touareg, Bentley, A8, Cayenne, Phaeton with kessy module
(IMMO4 system) after 2008)

If you read kessy eeprom data via VVDI-Prog, you can send the data to Xhorse engineer to decrypt CS/PIN for free.


How to read eeprom from EZS AUDI A6 Q7 by VVDI2 via OBD

Here is the instruction showing the capabilities of the Xhorse VVDI2 VAG key programmer: Reading EEPROM with EZS Audi A6 / Q7

How to read eeprom from EZS AUDI by OBD with VVDI2:
Select Key Learn->4th immobilizer system- Audi-> A6L/Q7/Allroad

A6L/Q7/Allroad EZS-Kessy (J518) 4th immobilizer system
Select Auodetect from engine (ECU)

reading data, please wait
Reading data success
Read and save EZS-Kessy EEPROM (J518)
Start security login
Reading data…
Reading data success
Save eeprom

click on Read VIN
VVDI2 Read Audi VIN successfully.

VVDI2 Cannot Find VAG Language Error Solution

I’ve bought the Xhorse VVDI2 VAG version key programmer, when I select Polish, it gave me error: “Can’t find VAG_Language.dll language resource file! Reinstall software to fix this problem”
To solve the problem you must move the mouse on the icon “VVDI2 Quick Start” and then right click select “Properties” and tick the box “Run this program as an administrator” then follow.
Restart VVDI2 and change the language to English in all its active licenses.

Xhorse engineer are currently working on the language of Polish for VVDI2. The program automatically detects the language of the Windows user interface and switches VVDI 2 on the same language. Due to the fact that Polish language is not yet completed after the program error appears as the attached photo. Several days later engineer work out a new version for language setting (Polish will be added).

VVDI2 BMW is not affected by this issue because it is already active Polish language.
It solves the problem of message about not finding the file language.dll.

p.s  Xhorse VVDI prog V4.2.1 released Polish language already.


Xhorse VVDI Prog V4.5.9 Programmer Software Free Download

Xhorse VVDI PROG ECU, MCU eeprom programmer software released to V4.5.9 on 28th, June 2017. 4.5.9 VVDI programmer adds Polish language and many ECUs.
v4.5.9 VVDIProg Update Feature (2017-06-28)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI-PROG USER MUNUAL 4.5.9 version in Doc folder
* Update polish language
+ Update V850 D-Flash format conversion tool
* Fix STM8 series options error
* Fix MED17.1 option error
* Fix V850E-DG3 diagram error
* Fix ME17.9.11.1 diagram error
* Fix BAOJUN630 diagram error
+ Add MPC5606B, MPC5607B, MPC5602D, MPC5606E, MPC5601P, MPC5602S, MPC5604S options
+ Add SPC560B50B2, SPC560B64L3, SPC560C40L1, SPC560C50L1, SPC56AP54L3, SPC56AP54L5,
SPC56AP60L3, SPC56AP60L5 options in <2-MCU>-><ST-SPC560XXXX>
+ Add MT60(TC1766) option in <3-ECU>-><DELPHI>
+ Add V3 diagram in <3-ECU>-><DELPHI>-><MT80(TC1766)>
+ Add KESSY(2008–) option in <4-IMMOBILIZER>-><VOLKSWAGEN>
(Need to use with VVDI2,support Touareg, Bentley, A8, Cayenne, Phaeton with kessy module (IMMO4 system) after 2008)
+ Add SENOVA-D70 option in <5-DASHBORAD>-><BAICMOTOR>
+ Add EXCELLEGT option in <5-DASHBORAD>-><BUICK>
+ Add AVEO option in <5-DASHBORAD>-><CHEVROLET>
+ Add FIESTA option in <5-DASHBORAD>-><FORD>
+ Add K5(2017) option in <5-DASHBORAD>-><KIA>
+ Add FREELANDER(2004) option in <5-DASHBORAD>-><LANDROVER>
+ Add MG3(2016) option in <5-DASHBORAD>-><SAICMOTOR>
+ Add EXCELLEGT-SRS option in <7-ARIBAG>-><BUICK>
+ Add ALSVIN-SRS option in <7-ARIBAG>-><CHANGAN>
+ Add CITY-SRS(MPC5604P) option in <7-ARIBAG>-><HONDA>
+ Add 2008-SRS option in <7-ARIBAG>-><PEUGEOT>
+ Add SRS-VW20LE(SPC560P50L3) option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add A4L-LWR-MODULE(2010), A6L-C6-AMP, A8L-AMB-MODULE(2011), ESL-HC08GR16-V2 options in <8-OTHER>-><AUDI>
+ Add 528-SEAT-MODULE option in <8-OTHER>-><BMW>


How to use VVDI Key Tool to copy 2017 Mahindra Scorpio remote

Q:Can I use VVDI Key Tool to copy 2017 Mahindra Scorpio 3 button remote key 434MHz?
A: Yes. And it’s easy!
Follow steps below VVDI Key Tool clone a new Mahindra Scorpio remote, a 3 minute job!

Use VVDI Key Tool software V1.2.8 in this case:
Choose VVDI Key Tool “Remote Clone” function.
And choose “Special Clone”.
Put the original Mahindra Scorpio remote key close to VVDI Key Tool antenna area.
Follow the instruction:
First press the remote LOCK button for 2 times.
Next press the remote UNLOCK button for 2 times.
Then press the Trunk Release button for 2 times.
After that, press OK button to clone remote key.
Connect the new remote key PCB with VVDI Key Tool via the programming cable.
Set the remote key frequency as 434MHz then choose “Clone” to copy the new key.
VVDI Key Tool clone a new Mahindra Scorpio remote key 100% success.
Now insert the key battery and put the new key PCB back into the key shell.
And test the new key work totally same as the original one!
Xhorse VVDI Key Tool Remote Maker Mahindra Scorpio 2017 remote OK!