6/28/2017

Xhorse VVDI Prog V4.5.9 Programmer Software Free Download

Xhorse VVDI PROG ECU, MCU eeprom programmer software released to V4.5.9 on 28th, June 2017. 4.5.9 VVDI programmer adds Polish language and many ECUs.
————————————-
v4.5.9 VVDIProg Update Feature (2017-06-28)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI-PROG USER MUNUAL 4.5.9 version in Doc folder
* Update polish language
+ Update V850 D-Flash format conversion tool
* Fix STM8 series options error
* Fix MED17.1 option error
* Fix V850E-DG3 diagram error
* Fix ME17.9.11.1 diagram error
* Fix BAOJUN630 diagram error
+ Add MPC5606B, MPC5607B, MPC5602D, MPC5606E, MPC5601P, MPC5602S, MPC5604S options
in <2-MCU>-><MOTOROLA-MPC560XXXX>
+ Add SPC560B50B2, SPC560B64L3, SPC560C40L1, SPC560C50L1, SPC56AP54L3, SPC56AP54L5,
SPC56AP60L3, SPC56AP60L5 options in <2-MCU>-><ST-SPC560XXXX>
+ Add MT60(TC1766) option in <3-ECU>-><DELPHI>
+ Add V3 diagram in <3-ECU>-><DELPHI>-><MT80(TC1766)>
+ Add KESSY(2008–) option in <4-IMMOBILIZER>-><VOLKSWAGEN>
(Need to use with VVDI2,support Touareg, Bentley, A8, Cayenne, Phaeton with kessy module (IMMO4 system) after 2008)
+ Add XC60-REVIEW-MIRROR option in <4-IMMOBILIZER>-><VOLVO>
+ Add SENOVA-D70 option in <5-DASHBORAD>-><BAICMOTOR>
+ Add EXCELLEGT option in <5-DASHBORAD>-><BUICK>
+ Add AVEO option in <5-DASHBORAD>-><CHEVROLET>
+ Add FIESTA option in <5-DASHBORAD>-><FORD>
+ Add K5(2017) option in <5-DASHBORAD>-><KIA>
+ Add FREELANDER(2004) option in <5-DASHBORAD>-><LANDROVER>
+ Add MG3(2016) option in <5-DASHBORAD>-><SAICMOTOR>
+ Add EXCELLEGT-SRS option in <7-ARIBAG>-><BUICK>
+ Add ALSVIN-SRS option in <7-ARIBAG>-><CHANGAN>
+ Add CITY-SRS(MPC5604P) option in <7-ARIBAG>-><HONDA>
+ Add 2008-SRS option in <7-ARIBAG>-><PEUGEOT>
+ Add SRS-VW20LE(SPC560P50L3) option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add A4L-LWR-MODULE(2010), A6L-C6-AMP, A8L-AMB-MODULE(2011), ESL-HC08GR16-V2 options in <8-OTHER>-><AUDI>
+ Add 528-SEAT-MODULE option in <8-OTHER>-><BMW>


vvdi-prog

How to use VVDI Key Tool to copy 2017 Mahindra Scorpio remote

Q:Can I use VVDI Key Tool to copy 2017 Mahindra Scorpio 3 button remote key 434MHz?
A: Yes. And it’s easy!
Follow steps below VVDI Key Tool clone a new Mahindra Scorpio remote, a 3 minute job!

Use VVDI Key Tool software V1.2.8 in this case:
Choose VVDI Key Tool “Remote Clone” function.
vvdi-key-tool-copy-Mahindra-Scorpio-remote-1
And choose “Special Clone”.
vvdi-key-tool-copy-Mahindra-Scorpio-remote-2
Put the original Mahindra Scorpio remote key close to VVDI Key Tool antenna area.
vvdi-key-tool-copy-Mahindra-Scorpio-remote-3
Follow the instruction:
First press the remote LOCK button for 2 times.
Next press the remote UNLOCK button for 2 times.
Then press the Trunk Release button for 2 times.
After that, press OK button to clone remote key.
Connect the new remote key PCB with VVDI Key Tool via the programming cable.
vvdi-key-tool-copy-Mahindra-Scorpio-remote-4
Set the remote key frequency as 434MHz then choose “Clone” to copy the new key.
vvdi-key-tool-copy-Mahindra-Scorpio-remote-5
VVDI Key Tool clone a new Mahindra Scorpio remote key 100% success.
vvdi-key-tool-copy-Mahindra-Scorpio-remote-6
Now insert the key battery and put the new key PCB back into the key shell.
vvdi-key-tool-copy-Mahindra-Scorpio-remote-7
And test the new key work totally same as the original one!
vvdi-key-tool-copy-Mahindra-Scorpio-remote-8
Xhorse VVDI Key Tool Remote Maker Mahindra Scorpio 2017 remote OK!
vvdi-key-tool-copy-Mahindra-Scorpio-remote-9

4D 4C Key Copy Chips for Xhorse VVDI Key Tool

Original 4D 4C car key copy chips for Xhorse VVDI Key Tool remote maker are available in vvdishop.com.
Package includes:
For sale price: US$34.99 Free shipping
vvdi-key-tool-chip-1

vvdi-key-tool-chip-2

vvdi-key-tool-chip-3

vvdi-key-tool-chip-4

6/21/2017

Tips to Program Audi A6L 4th IMMO Key by VVDI2

For Audi A6L 4th generation immobilizer vehicles, if you get the new key from dealer,when you use VVDI2 VAG to program this key, transponder and remote will auto programming at the same time.

If you use Xhorse A6 new key(xhorse a6 new key with 8E transponder,not A6L type wireless remote with NXP transponder, you can check the transponder type) 

After you key learn success,you need to 'read J518 EEPROM dump with working key'---load this dump to 'make OEM key remote' for programming remote.




Q: Where can i buy this Xhorse A6 key with E8 transponder??

A: It is not yet available. Will on sale in the near feature.




Credit to Xhorse engineer representative Samic.
www.vvdishop.com

6/18/2017

Xhorse VVDI Key Tool SN HW SW Unknown Error Solution

Problem:

hello good day, can you help me please? I have updated my Xhorse VVDI key tool remote generator, but then nothing display in the screen, shows SN, SW, HW (serial number, hardware, software) unknown error, device can not use, how to solve?
vvdi-key-tool-error-1
vvdi-key-tool-error-2
Warning:
Do not try to update your vvdi key tool!!!


How to solve the error?
If you already updated vvdi remote maker by mistake, please wait for the authorized update tool download. When it is available, we will post the download link on both webpage and blog.

6/13/2017

Newbie Question: How to renew Mercedes EIS with VVDI MB?

How to renew EIS with VVDI MB BGA Tool 3.0.0? I have key! But on key-pcb only bga mcu… stuck here, what should I do next?
mercedes-renew-eis-1

mercedes-renew-eis-2
 Solution:
You need to get the “Key Password” for that EIS and paste it where it says.
So online key password calculation. Need order 1Token for VVDI MB BGA Tool Password Calculation
Then read EIS “OBD not IR” press get erase pass and wait, paste key pass and save file.
Next press renew EIS but this on “IR not OBD”.

Here is a Mercedes EIS renew via VVDI MB guide:

VVDI2 VAG Program Jetta 2012 All Keys Lost

VW Jetta 2012 VDO NEC 2009+ UDS Keyless Go system lost all keys, VVDI2 VAG key programmer prepare key success via OBD. Photo attached.
jetta-2012

vvdi2-program-jetta-2012-key-1

vvdi2-program-jetta-2012-key-2
Get PIN, CS, MAC, please wait

vvdi2-program-jetta-2012-key-3

vvdi2-program-jetta-2012-key-4

http://blog.vvdishop.com/vvdi2-vag-program-jetta-2012-keyless-go-all-keys-lost/

6/08/2017

VVDI2 VAG Add Passat 2013 4th IMMO Key NEC Dash by OBD

Here is the guide to use Xhorse VVDI2 VAG key programmer to add key for Passat 2013 with VDO NEC+24C64 dashboard by OBD.

VVDI2 adds Passat 2013 Key Guide:
Go to VVDI2 software-> select VW car brand
vvdi2-software
select-vehicle
Select Key Learn->4th Immobilizer system-VW/Skoda/Seat->Auto detect type
VVDI2 read VIN ECU and dash type: NEC+24C64
Click on Diagnosis
Click on Read EEPROM/FLASH
Select Read eeprom, click on Next
read-eeprom

Turn ignition to ON position (If it is smart key, turn ignition OFF then turn it ON)
Dash instrument screen is in black, it is normal
black-screen
Follow VVDI2 key programmer prompts:
1.Dashboard is in black, complete following steps to activate the dash:
2.Read and save eeprom data
3.Read and save IMMO data
4.Generate a dealer key (if has working key and does not need to add a key, skip to Step 7)
5. Reset dash
6.Key learning from immo data
7. Other functions
follow-precedure

Reading eeprom data
Dave eeprom data
read-immo-data

Read Immobilizer data
Save immo data
Click on Generate Dealer Key
generate-dealer-key
Choose car manufacture->VW
Select Prepare normal dealer key
prepare-normal-dealer-key

Insert car key into vvdi2 VW
insert-key-into-vvdi2
click Next
confirm YES to generate VW normal dealer key
Generate dealer key success
generate-dealer-key-success
all preclude done
reset-dash
Reset dash
reset-dash-success
Reset success. Dash activated.
add-key
Select Add key
(Make sure you have backup both eeprom and immo data)
key-learning
Select 2nd option to do key learning and enter key numbers to to learned
click on Next
Turn ignition to ON position (If it is smart key, turn ignition OFF then turn it ON)
Confirm if it is smart key
insert-key-1
If the dash display 1-2, insert next key into VVDI2’s coil
insert-key-2
Insert second key within 5 seconds, turn ignition ON for 2 seconds, dash displays 2-2
Key Learning success
start-engine-with-new-key
Start engine with the new key.
Done!

6/07/2017

VVDI MB NEC Key adapter or NEC ELV adapter to read Key Password

Q:
Hi, I need to read password from Mercedes key with VVDI MB BGA Tool.
What to buy: nec key adapter or nec elv adapter?

A:
Xhorse VVDI MB NEC Key adapter is what you need to buy.
vvdi-mb-nec-adapter
VVDI MB Key NEC Adapter:


  1. Support read key password from V51, V57 version
  2. Support renew/write key versions: v28,v35,v40,v51,v57,v03,v05,v06.v08,v09,v59,v61

6/06/2017

VVDI2 Full Key Programming Car List by OBD

Questions before starting:
Now Xhorse VVDI2 VAG id48 is not ready. so i can’t add key passat b6 or any other vag key with id48 chip?
It programs passat b6 b7 or other id48 cars by obd?


Solution:
Not all possible over obd. Some need read out bcm2, some of them need read out with programmer, like vvdi prog or other.

Some newer Passat with ECU EDC17, if you have condor key cutting machine and with working key,
you can directly do by OBD get 6 cs and use working key get the 7th bytes cs.
If without condor, you should remove the comfort module get the eeprom,unencrypt the cs and pin from EDC17.


Some old model passat with old ECU edc16 ,yes you can by OBD but you must have working key for calculation last two CS No.  No need condor authorization for this , condor authorization is only for calculation PIN CS from edc17.
vvdi2-passat-b6
Customer working experience:
Vvdi2 does passat by obd but not on 1.6tdi with pcr, I have done 2012 caddy by obd with it, f10 key by read mcu in cas4 with vvdi prog and made key with vvdi2 , I have made keys also with the key tool, I have done passat from ccm also and some other vag also.


Full key programming car list which vvdi2 full does by obd. 
look the picture:
vvdi2-full-obd-list-1
vvdi2-full-obd-list-2
vvdi2-full-obd-list-3
vvdi2-full-obd-list-4
Credit to darox2005 in MH forum.