4/13/2018

VVDI Prog and VVDI2 Program Fiat Multipla 1998 IMMO Key

Customer new test report: successfully added a key on a Fiat Multipla year 1998 (European model).

Step 1: Read IMMO data with VVDI Prog
Remove immo ecu and find out chip MC68HC IC 0L32A
Follow VVDIProg wiring diagram to connect ECU with programmer and adapters
vvdi-prog-fiat-multipla-immo-1
vvdi-prog-fiat-multipla-immo-2
vvdi-prog-fiat-multipla-immo-3
vvdi-prog-fiat-multipla-immo-4
vvdi-prog-fiat-multipla-immo-5
Open VVDI Prog software, select 4-Immobilizer->Fiat->immobilizer 0L72A
Read immo data and save eeprom
vvdi-prog-fiat-multipla-immo-6
Step 2: Make dealer key with VVDI2
Go to Transponder Programmer->Immobilizer Data Tool->Select Euro, Fiat Multipla, 1998-68HC0908
Upload eeprom data read by Xhorse VVDI Prog
Select unused key position and make dealer key
vvdi2-fiat-multipla-key

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.