Xhorse VVDI Prog Software Update to V4.7.6

Xhorse VVDI PROG programmer latest software version V4.7.6 was released on October 31st, 2018.

————————————-

VVDIProg v4.7.6 (2018-10-31)
* This version DON’t need update firmware
* Fix V850 SERIES D70F3558 CHIP READ ERROR bugs
+ Add VVDI PROG USER MUNUAL 4.7.6 version in Doc folder
+ MB90F352E, MB90F352ES, MB90F352TE, MB90F352TES, MB90F352A, MB90F352AS, MB90F352TA, MB90F352TAS, MB90F357E,
MB90F357ES, MB90F357TE, MB90F357TES, MB90F352, MB90F352B, MB90F352S, MB90F352BS options in <2-MCU>->
+ Add CX70(2017) option in <5-DASHBOARD>->
+ Add FORTUNER(2018) option in <5-DASHBOARD>->
+ Add BAOJUN510-TIRE PRESSURE MODULE option in<8-OTHER>->

Free Download VVDI Prog V4.7.6 software
https://mega.nz/#!ygIhDYIQ!08YQi5fKzodrixfnOE-KXPAOjSUtIMSGR3HOPQqYEUc
password:123456

http://www.vvdishop.com/info/xhorse-vvdi-prog-software-update-to-v476-21258.html

Renault BCM T4 MPC5607B Pinout to VVDI Prog

Here's the pinout to read Renault BCM T4 MPC5607B using Xhorse VVDI Prog programmer. 

How to exchange Xhorse VVDI MB 200 Points to 1 Token?

You need token for VVDI MB online password calculation. To exchange points for tokens you need :

1) Registered Xhorse APP

2) Open app from Mobile phone / tablet and click BONUS points

If you want to check all your points from each device and connected device click

3) To exchange points , go to Points and Select device

4) Click (+) to add tokens (200points = 1 token)

5) confirm

6) Select your dealer , confirm exchange points and confirm your choice

http://www.vvdishop.com

http://www.vvdishop.com/service/how-to-exchange-xhorse-200-points-to-1-token-8073.html

VVDI Prog pinout to Siemens VDO TA AJ06 Gearbox Laguna 3

Here's the Xhorse VVDI Prog pinout to Siemens VDO TA AJ06 Gearbox Laguna 3

How to Download Points from Xhorse VVDI MB BE Key Pro

Every Xhorse VVDI BE key pro MB key has 200 points.  Points can be download before you program key or after.
200 points can be exchange to 1 token for online calculation.

1) Open VVDI MB Tool 
2) click on POINTS SYSTEM

3) in new window click ONLINE VERIFY BE KEY

4) You will see message

5) Insert VVDI BE key PCB into VVDI MB and click OK

6) If Key have points you will see message: “This BE key has bonus points.”

If POINTS already used you will see message:  “This BE key doesn’t have bonus points, its points was already used.”

7) Click UPLOAD POINTS to upload it to your VVDI MB BGA tool

http://www.vvdishop.com/service/how-to-download-points-from-xhorse-mb-be-keys-8072.html

BSI 2004 P06 95128 and 4L00M Flash Pinout to VVDI Prog

BSI 2004 P06 4L00M Flash Pinout to VVDI prog

BSI 2004 P06 95128 Pinout to VVDIProg

PSA IAW 6LP pinout to Xhorse VVDI Prog

PSA IAW 6LP pinout to VVDI Prog: IAW 6LP2.01/2.05 and IAW 6LPC105

IAW 6LP2.01 pinout VVDi Prog

IAW 6LP2.05 pinout VVDiProg

IAW 6LPC.105 Pinout VVDi-Prog

Xhorse VVDI2 Software Update to V6.0.0 (2018-10-26)

Xhorse VVDI2 key programmer software released to V6.0.0 adding Toyota H transponder(128bit) generation.

VVDI2 latest software version 6.0.0
************************************************************************
*** 2018-10-26
*** Require firmware V6.0.0
************************************************************************
===== VAG V6.0.0   =====
1. Immoprovement for autodetect VAG immobilizer system
2. Bugfix

===== BMW V6.0.0   =====
1. FEM/BDC system add support new verison: BDC 00002419_080_010_010
2. Bugfix

===== Porsche V6.0.0   =====
1. Bugfix

===== PSA V6.0.0   =====
1. Bugfix

===== Transponder Programmer V6.0.0 =====
1. Special Transponder – Support generate Toyota H transponder(128bit):
a. Toyota H transponder – Camry, Levin
b. Toyota H transponder – Corolla (First in the world!!!)
(You should use Xhorse H transponder, it will available soon)
2. Support autodetect and read TIRIS DST AES(8A) transponder
3. Points System: Bugfix for verify remote bonus points function
4. Immobilizer data tool: TONGZHI immobilizer box support new type
5. Bugfix for copy chip 11 and 12.
6. Bugfix

===== Copy 48 (96 bits) V6.0.0  =====
1. Bugfix

===== J2534 V6.0.0   =====
1. Bugfix

===== Online Upate Tool V6.0.0  =====
1. Bugfix

===== Quick Start V6.0.0   =====
1. Bugfix

Free download VVDI2 6.0.0 software
https://mega.nz/#!v1pxwaiS!C-Aca7FLsGrkxe9DFk1PdvdANPhIL4MRChlsn29tVG8

BSI Magnet Marelli MC68HC912DG128 Pinout to VVDI Prog

Here’s the Xhorse VVDI Prog programmer pinout to bsi magnet marelli.

I have successfully read bsi magnet marelli whit vvdi prog,mcu is MC68HC912DG128 unsecured

Mask:5H55W , using this wiring diagram , hope this will be useful for somebody used

wires are VCC -red

GND black ,

reset- yellow

and BKGD – purple

Credit to iozo from DK forum.

http://www.vvdishop.com

http://blog.vvdishop.com/read-bsi-magnet-marelli-mc68hc912dg128-with-vvdi-prog/

VVDI Key tool Programs 433MHz Remotes to Mazda 323 Protege

Done! Have tested remote generation on VVDI Keytool. Have a big success with Mazda 323 Protege

Car: Mazda 323 Protege

Key programmer: Xhrose VVDI Key Tool

Source: http://www.vvdishop.com/wholesale/xhorse-vvdi-key-tool.html

Frequency: 433MHz ASK

Transponder chip: 8C

Remote and key used for key programming

Generate a remote

Remote/Smart Program – Remote Key – Asia – Mazda

Search by key: 1292 40601 Australia 2BT

Connect the remote module to the VVDI cable

Press {Gen} to make a remote

Successful!

Fill the battery then install it to the remote shell

Program the remote by manual

1. Open the door

2. Turn on – lock for 3 times

3. Close- open driver door for 3 times…Door cycle once

4. Press the unlock button on the remote twice…Door cycle once

5. Close the driver door…Door cycle twice

Test the remote

 

The new remote is working!

http://www.vvdishop.com/wholesale/xhorse-vvdi-key-tool.html

http://blog.vvdishop.com/mazda-remote-433mhz-chip-8c-programmed-with-vvdi-key-tool/

How to modify Xhorse Remote Tester to test 868MHz Frequency

Xhorse remote tester used to support 3000Mhz-320Mhz and 434MHz frequency testing only. Now users can modify the tester by yourself to enable it to test 868mhz.

Frequency test range:

1.300Mhz-320hz

2.434Mhz

3. 868Mhz

How to modify Xhorse remote tester to test 868Mhz?

(Note:  If your local mobile phone frequency belongs to 868 MHz, i.e U.S.A, you cannot modify the tester , otherwise will cause obstruction. )

Remove battery from the tester

Remove the case and find out main board

Do following:

It is okay

Now you can try to test 868Mhz

www.vvdishop.com

http://blog.vvdishop.com/make-xhorse-remote-tester-to-test-868mhz-frequency/