Read VW Vento 2018 PIN & CS by Xhorse iScanCar MM007

 How to read CS and PIN code of a VW Vento 2018 with Xhorse iscancar MM007?

 

It is easy.

Menu path:

Go to Special Function->Read PIN Code->17 Dashboard->NEC+24C64 (2014- VW/Skoda/Seat)

Read CS and PIN successfully.

Xhorse VVDI Prog V5.3.1 Adds Beetle D70F3524 MQB

 Xhorse VVDI Prog programmer software was released to V5.3.0 on Sept. 27th, 2023.

v5.3.1 (2023-09-27)

* This version DON’t need update firmware
+ Add M68HC805P18(H44H), M68HC805P18(K05Y), MC68HC05P18(1F52W), MC68HC805P18(0G64R),
MC68HC805P18(G64R), XC68HC805P18(G04R) options in <2-MCU>-><MOTOROLA-MC68HC(8)05>
+ Add RENEGADE BCM(2017)(R7F701034), RENEGADE BCM(R7F701056) options in <4-IMMOBILIZER>-><JEEP>
+ Add Beetle (D70F3524)-READ(WELD), Beetle (D70F3524)-WRITE(WELD) options in <5-DASHBOARD>-><VOLKSWAGEN>
+ Add VIAGGIO SMARTBOX option in <8-OTHER>-><FIAT>
+ Add HA_MA S7 option in <8-OTHER>-><FAW>

 

Free download VVDI Prog V5.3.1 software

https://mega.nz/file/BEkkWKZY#JOmbN4MOy7D0UOnR8h4RsaBcyh_9NAV_sUU5P7CnZoA

How to Solve VVDI MB Failed Error 3 Product is Incorrect?

 Problem:

When trying to program key with xhorse vvdi mb tool, it failed me and said error 3 product status is incorrect. Any clue?

Solution:

The error indicated the vvdi mb is locked. This machine was sold in China during the promotion period.

Don’t buy used vvdi mb from unknown resources. In this case, need to contact Chinese owner to buy points from xhorse to unlock device.

Users abroad don’t use points system.

 

www.vvdishop.com

How to Clone Garage Remote by VVDI Key Tool Max?

 Today we’re going to use the Xhorse VVDI Key Tool Max to clone a garage remote control. This garage remote to be cloned is brought from the client, which has 4 buttons. So next we’ll use a new Xhorse Masker Garage Remote to finish the cloning. I’ve separated its circuit board and battery on the table.

Click “Remote Clone” to check frequency, it shows 433.80Mhz.

HCS/Fixed Code Clone >> Garage key >> Start clone

Follow the prompts to press the original remote buttons in turn.

Once completed, it will show with confirm screen.

 

Connect Xhorse Garage Remote to Key Tool Max via cable.

Press “Clone”.

It will start cloning automatically…

Remote clone success.

Put a battery into the new garage remote to detect frequency.

As you can see, it’s same as the original one 433.80Mhz.

Let’s take out near the garage door, it can work and open the door.

Perfectly done!

www.vvdishop.com

Unlock BMW X1 2019 BDC with Xhorse VVDI2 by OBD

 Xhorse VVDI2 V7.3.5 software update BMW BDC unlock via OBD.

Report today:

BMW X1 12/2019  BDC SWFL unlock success via OBD with VVDI2 and key programmed fast and easy.
VVDI tools using a lot and never was failed, at least damaged something!
In this type of job you need to be ready for some background solution if something going wrong, if you not ready need going away from this field!
VVDI tools very good tool for that money.

NOTE:

SWFL_00002419.085.xxx.xxx version cannot be unlocked by OBD.

What Option to Generate Opel Vectra C ID46 Key by Xhorse?

 Question: I need to program a universal Xhorse key for European Opel Vectra C 2005, original key ID 46 as in the photo. There is no vectra C in the vvdi mini key tool selection.

If generate remote under this option, remote not work after programming with im608.

Solution:

Some managed to generate remote under this key option: PCF7946 Delphi BSI

Review:

2005 Opel Vectra C Fiat Delphi BSI software was applied to the xhorse super XE remote, the pin code was received by autel, the coding was done with xtool x100 pad3.
Note: The communication with the vehicle computer could not be established for a long time, the car was left running for 15 minutes, then the coding was successful.

If you fail to use this option, use aftermarket Pcf7946 or original key. Then program with key programmers T300, CK100 etc.

 

www.vvdishop.com