Program Golf 4 Key with Xhorse VVDI2 and Super Chip

 This is an operation tutorial of how to use Xhorse VVDI2 VAG key programmer and vvdi super chip to program a key for VW Golf 4.

 

Procedure:

Start up VVDI2 quick start, click VW, wait until connecting to device successfully.

 

Special function >> K-line instrument/immobox >> Read EEPROM

 

Connecting to device, please wait…

 

Start transfer/receive data…

 

Reading address…

 

Reading data success.

 

Copy the PIN code 04376, close the window, go access to “Transponder Programmer”.

Click “Autodetect Transponder” to get transponder information.

 

VVDI super chip >> Set transponder type >> MEGAMOS 48 >> Reset VVDI super chip >> Yes

 

Resetting…success

Exit to click “Autodetect Transponder”, the transponder information has changed.

 

VVDI super chip >> Set transponder type >> MEGAMOS 48 >> Set

 

Setting Xhorse super chip type…success

 

Exit to click “Autodetect Transponder” again, the transponder information is same as first time.

Close the window, go back to VW

 

Key learn >> Key learn

 

Paste the pin code 04376 on “Login(PIN)”, click “Learn”.

 

Switch ignition off for 5 seconds, then switch on, click “OK”.

 

Switch off ignition. Insert every key to ignition and switch on at least 2 seconds. Click “OK”.

 

Adaption finished.

Done!

 

Above are a quick demonstration of using VVDI2 full Commander to program super chip for a VW Golf4. Thanks to https://www.vvdishop.com/