Program Toyota Sienna 2018 Key by Xhorse Key Tool Max + Mini OBD

 Today I’m gonna show how to add a key for Toyota Sienna 2018 using with Xhorse VVDI Key Tool Max + Mini OBD Tool.

 

Prepare a working key & a blank new key.

Insert Mini OBD Tool into OBD2 port.

Connect with Key Tool Max, let’s start:

Immo programming >> Toyota >> Select by type >> Smart key system >> Type 3 (8A smart card) >> Start execution

Wait until 100%…

 

Add a key >> Switch ignition on, press “OK” >> OK

 

The number of registered key is 2.

Keep touching the IG switch with the side of a working key with a sign, complete the operations within 30 seconds after pressing “OK”.

 

Keep touching the IG switch with the side of a new key with a sign, complete the operations within 30 seconds after pressing “OK”.

 

Place the key on the passenger seat, complete the above operations within 90 seconds after pressing “OK”.

Make sure all steps are completed. Wait for registration to complete.

 

Key registration succeeded! Press “OK”.

 

The number of registered key changed to 3 now, press “OK”.

 

Now let’s check if the functions of smart key are normal, all work fine.

Key programming has done!

 

This is using Xhorse Key Tool Max & Mini OBD Tool to program a key for Toyota Sienna 2018 successfully.

https://www.vvdishop.com/