Xhorse VVDI Key Tool Max + MINI OBD Tool can program Toyota Corolla Altis 2015 via OBD successfully. Following is the operation procedure with a working key.
Generate remote via VVDI Key Tool Max
This is XK Universal Remote without chip.
Connect MINI OBD Tool to OBDII port, press
Generate remote >> Vehicle remote >> Toyota >> Corolla Thailand >> Corolla Altis 2014+ 1404
Connect XK Remote with VVDI Key Tool Max,
press “Generate remote”.
Burn success.
Insert battery and install into remote shell.
Program remote via VVDI Mini OBD Tool
Make sure MINI OBD Tool is connected to Key Tool Max via Bluetooth, recommend to choose “Extended connection”. When indicator flashing with blue that means successful.
Turn on ignition with working remote. Press
IMMO programming >> Toyota >> Select by type >> Remote system >> Type2 >> Start execution >> Remote adding
Switch ignition on and open driver door at same time, press”OK”.
Complete the following operations within 30s:
Press both UNLOCK & LOCK button for 4s, then press LOCK button for 1s.
(If no programmed, press both LOCK & UNLOCK button for 4s, after releasing, press both at the same time.)
Match ends, check if remote can use.
Pull key out of ignition switch and test remotes.
All can work, done!
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.