Xhorse VVDI Tools, VVDI2, VVDI MB, VVDI Prog, VVDI key tool, VVDI BMW etc software & firmware download, update and technical support from vvdishop.com.
Xhorse Multi-Prog read and write Renesas V850 EPS (Electric Power Steering) module on a Land rover Range Rover Sport.
Processor: Renesas D70F3485
Using wiring diagram pinout (Land rover Evoque/Benz W166 EPS D70F3483/3485)
You can repair or replace a new EPS module.
Read Dflash and Pflash.
Then write Dflash and Pflash.
Xhorse Multi-Prog read BMW Continental MSD 80.2 DME on bench successfully.
Got a “faulty” ecu from BMW, MSD 80.2 and test it on bench with xhorse multi prog.
The pinout in multi prog is wrong. Buy you can read successfully on bench the ecu with the correct pin out.
Read INT eeprom(empty) full flash, maps, ext eeprom, and ISN code successfully.
Writing work also. We have done few on bench.
We here just to inform you that Xhorse Multi Prog software V1.2.3.0 and firmware V1.2.7 fix the issue that the adapter for the CAS4 not working with the multi prog.
Firmware V1.2.7 fixed 9S12 reading issue using CAS4+ solderless adapter to decode CAS4+ (5M48H).
XDNP CAS4 adapter has two versions, V1.2 and V1.3. The V1.3 new type of adapter with rely inside, V1.2 does not.
The old one V1.2 CAS4 adapter works perfectly.
This is a 2013 BMW 640i CAS4+. We set up the CAS4 solder free adapter with module and multi prog.
Menu: Immobilizer->BMW->CAS4 5M48H BACKUP (Adapter) option
Then read D-flash.
It is trying to decode the chip.
Read D-flash successfully. The file is huge.
We get a good read.
Some users reported that they failed to generate Xhorse XSSBR0EN Subaru XM38 remote on Subaru 8A/4D smart key models.
For example:
Tried to generate KeylessGp 4D, Legacy 2020-2022 8A, and Crosstrek 2018-2022 8A remote with Subaru XM38 but got an error.
.jpg)
Solution:
Check the compatible remote type in Xhorse App.
You should use XM-28 Toyota or XM38 Toyota remotes for Subaru 4A/8A smart keys.
As for the Subaru XM38, it is the universal XM38 remote.
These keys aren’t the XM38 Toyota special keys just nxp orange keys don’t work for Toyota or Subaru.
It can be used to generate remotes compatible with the XM38 Smart Key option.
Now, the Xhorse MQB RH850 V850 Adapter for Multi-Prog is available. It supports reading VW 4th gen Johnson Controls 34xx series, MQB-RH850(R7F) series and MQB 34xx series instruments. Required to use the MultiProg Programmer meanwhile.
For those who need to calculate immo data, VVDI2 or VVDI Key Tool Plus are both good choice. Following we’ll demonstrate the process on how to read MQB48 R7F701402 instrument data.
Connection
Open Multi-Prog software, find the option to view the connecting diagram.
Device >> MQB48-LOCK(R7F701402)-READ(VW->MQB)
Read Data via MULTI-PROG
Now, let’s proceed to read the data.
Crack reading >> OK
*You can check the read progress in the bottom left corner. Wait patiently for a few minutes…
After successful reading, save the data file.
Read MQB Data via VVDI2
Open VVDI software.
VW >> Key learn >> MQB platform instrument immobilizer >> Instrument with locked NEC35xx(MQB48, VDO/JCI) >> Decode immo data >> YES, load encrypt data without extern EEPROM
Press OK to save MQB48 immo data file!
The file can be used for making dealer key & adding key.
This is the usage method of MQB-RH850/V850 adapter for MULTI-PROG. No cutting wires, no lifting pins. Significantly reduces the risk of instrument damage. Very practical!
The instruction is to force Unlock BMW CAS4 with Xhorse Multi Prog if simple Unlock does not work.
Connect CAS4 module with multi prog via mcu adapter.
First we try simple unlock.
Select CAS4-5M48H-R/W/UNLOCK option
Confirm you already backed up eeprom and flash.
Unlock failed. Then we try force unlock.
Select CAS4-5M48H-Force UNLOCK option in multi prog software.
Press UNLOCK.
Unlock CAS4 chip successfully.
Then select CAS4-5M48H-R/W/UNLOCK again
Read chip ID.
Read D-flash and P-flash then save.
Here are the tips to generate and modify Xhorse Toyota XM38 key for a Lexus rx350, FCCID: HYQ14FBB (231451-0010 “G” Board).
User report:
“Did a 2019 Lexus rx350 using xhorse XM38 and these are the settings that worked for me proximity and remote functions worked.
This one was especially for this key.
You can edit them manually. When you’re on the remote screen, on the bottom left there’s a “more” option. After that, select modify button-distance and then you can read the key after being generated.
