Can VVDI Prog Read MQB ELV uPD70F3624?

 Problem:

Need help reading uPD70F3624 by Xhorse VVDI Prog.  Connected in-circuit according to their scheme.  But the programmer does not see the ID.

Gives: Try Frequency failed

Try low frequency, still no luck. It doesn’t even give me an ID.

Technical Support:

If the ELV Renesas is alive and correctly soldered according to the scheme, then it should connect and read the ID without raising/lowing frequency.

It vvdi prog cannot read the ID, it will not read the mcu.  This was confirmed by xhorse engineer.

 

Which tool will read?

Here is the user’s working experience. Share for purpose.

‘I read the Uart mode in orange. At first, the orange5 programmer also refused to read, until I set the quartz frequency to 2000 kHz and after clicking on the MCU info icon, he gave me the MK parameters and it turned out that the MK was 70F3371 and not 70F3624 as it was written on the stone. After choosing 70F3371 and setting the frequency to 8000 kHz, everything was fine.

Xhorse Mini OBD Adds 2012 Qashqai Remote Key

 Xhorse vvdi mini obd tool is an easy and cheap tool to calculate automatic pin and program 2012 Nissan Qashqai spare remote key (flip type).

Step 1: Read Pin Code

Connect mini obd or key tool max pro with vehicle via OBD
Go to Mini OBD app, select IMMO Programming->Nissan-> Read BCM code and release ELV

Turn on ignition switch

Read 5-digit BCM code succeed

Press OK to upload data to calculate 4-digit password

Calculate 4 digit Pin code successfully

 

Step 2: Add Key
Go back to the Nissan Immo function
Select from model- Qashqai- before 2015- Immo system -Program flip keys

Input password to continue

Insert key and turn on ignition switch
check if immo indicator goes off, if yes, program key successfully

place next key and turn ignition on
Xhorse mini obd tool program 2nd key successfully

Turn on ignition several times until you steering wheel is working.

Test remote and start vehicle with both keys.

Done.

http://blog.vvdishop.com/xhorse-mini-obd-read-nissan-qashqai-2012-pin-and-add-key/

Xhorse VVDI Prog V5.1.9 Adds Many RENESAS V850 MCUs

 Xhorse VVDI Prog new V5.1.9 software adds many RENESAS-V850 MCUs.

 

v5.1.9 (2022-08-29)
* This version DON’t need update
firmware
+ Add D70F3260,
D70F3261,
D70F3262,
D70F3263,
D70F3264,
D70F3265,
D70F3266,
D70F3270,
D70F3271,
D70F3272,
D70F3273,
D70F3274,
D70F3275,
D70F3276,
D70F3280,
D70F3281,
D70F3282,
D70F3283,
D70F3284,
D70F3285,
D70F3286,
D70F3287,
D70F3288,
options in
<2-MCU>-><RENESAS-V850>

 

Free download vvdi prog v5.1.9 software

https://mega.nz/file/cQ9VlKgB#jO4myFFetZwhds2h_diImL13xdWcoCPyE3maybvjYE0/

Xhorse VVDI MB W212 Renew ISM Timeout Error Solution

 Problem:

I am trying to virgin a Mercedes Benz w212 2014 ISM with Xhorse VVDI MB Tool but when i try to read it i get “Start transfer/receive data……. time out” and it doesn’t read gets stuck at 5%. This is the second ISM with the same error.

This is my setup and cable i am using.

I am supplying the unit with 12 volt supply.

Solution:

Some W212 can be FBS4 system. Last FBS 3 are 1852

DSM may be the FBS4 system. vvdi mb/any tool won’t recognize FBS4.

The only solution is to disassemble and copy the Motorola.

It will be able to renew d file if you can read the Motorola with xhorse vvdi prog after disassembly.
Give it a try.

Continental (DSM)

Siemens (ISM)

Xhorse VVDI MB Keeps Insert and Take out IR Adapter?

 Problem: Is it a normal process during xhorse vvdi mb tool password calculation?? If all key is lost?

vvdi mb keeps saying take IR adapter out of EIS and insert IR adapter to car.

I have a test platform connected. I bought this platform because this has eis cables.

Solution:

You need the MB power adapter, otherwise, you’ll get sore fingers.

If not connect with Power Adapter, you need to replug IR adapter many many times. That’s will be a waste of too much time.

That test platform won’t work. The supply voltage must be interrupted at intervals.

vvdi mb+power adapter+eis cables is enough, you can buy ELV ESL cable set for vvdi mb like this:

https://www.vvdishop.com/wholesale/benz-eis-elv-5-in-1-cables-for-vvdi-mb.html

How to Choose Mercedes Key Shells for VVDI BE Key?

 How to choose a proper Mercedes Benz key shell for Xhorse VVDI BE Key Pro green board and yellow board?

 

3 Buttons key shell:

 

Item No: SA1794 & SA1794-C1

SA1794 has been tested by many, good quality and nice.

SA1794-C1 is the 2022 new key shell from another manufacturer.

 

SA1794-C1 LOGO card position is more accurate than SA1794.

C1 is much cheaper than SA1794, 5pcs= $21.99

Can use Xhorse Mercedes smart key 3 button on 2 button key and it worked lock/unlock/ trunk

Just on non keyless go

Applicable List:705 Moto(1997-2000) NEC(2001-2005) NEC(2006-2010) BGA(after 2011)

How to install VVDI BE key with 3-button key shell?

3+1 Benz key shell with panic button:

How to install VVDI BE key and 3+1 buttons key shell?

How to Fix Xhorse VVDI Prog System Error?

 Problem:

Can anyone help? I try to install xhorse Vvdi prog software 5.1.8 but keep getting this system error.

‘System error
The code execution cannot proceed becase NetClient.dll was not found.’

Solution:

vvdi prog software works on windows 10 system.

You have to disable windows defender, disable the firewall and antivirus programs.

If still not working,  redownload software and reinstall again.

www.vvdishop.com

VVDI Key Tool Max Points & Tokens Check

 How-to: check Xhorse VVDI Key tool Max/Key Tool Max Pro tokens and bonus points.

Fisrt of all, combine keytool max with xhorse app and other xhorse tools.

Go to Account->Combined device

You will see key tool max points and tokens

Program 2014 Kia Optima AKL with Xhorse Smart Remote

 For those of you using Xhorse universal smart keys. Here’s a nice discovery.

I got called for all keys lost on a 2014 kia optima this morning.  It uses the key in the right but I don’t have it in stock. So I decided to generate the older smart key to give it a try and it’s compatible with the car. The fccid is different on each of them. I know the older style is compatible with a lot of models.

Generate xhorse smart remote with xhorse key tool max pro under Optima (2011-2013) KeylessGo ID46 315Mhz option

Password read smooth and key programmed on the first try. Hope this helps.

How to Fix Xhorse VVDI2 BMW FEM Lost Sync Code?

 Problem:

I was trying to program BMW FEM key with xhorse vvdi2 but failed, threw error sync code lost.

Error: synchronize code between working key and FEM/BDC system was lost.

Anyone know what to do in this case?

Solution:

Before doing anything try to start the car if not

Read isn from DME/DDE

And make key learning and when ask you if you have ISN, enter your ISN number and complete the key learning and rewrite again coding FEM file and start the car, all will be ok.

After the key was learned successfully need to restore coding to start car.

You can backup and restore FEM coding on BMW with xhorse vvdi bimtool, cgdi, yanhua acdp etc.

Check instruction here

http://blog.vvdishop.com/xhorse-vvdi-bimtool-pro-bmw-fembdc-backup-coding/

Xhorse Super Chip XT27B and XT27A Comparison

 Xhorse tech will roll out the new vvdi super chip XT27B.  XT27B is the upgrade version of XT27A.

 

What’s the difference between superchip XT27B and XT27A?

Transponder Compatibility	Xhorse VVDI Super Chip XT27A	Xhorse VVDI Super Chip XT27B
46	Yes	Yes (optimized)
47 (Honda electric A/G)	X	Yes (NEW)
49 (Ford)	X	Yes (NEW)
4A	X	Yes (NEW)
MQB	X	Yes (NEW)
8A Toyota H Chip/Hyundai 8A, copy	Yes	Yes
8C Haima	Yes	Yes
8E Honda	Yes	Yes
4C	Yes	Yes
4D (60/63/67/69/70/72g/80/83)	Yes	Yes
4E (64)	Yes	Yes
48 (VAG/Honda)	Yes	Yes
7935 (33/40/41/42/43/44)	Yes	Yes
7936 (46)	Yes	Yes
11/12/13	Yes	Yes

Device Compatibility:
VVDI2
VVDI MINI KEY TOOL
VVDI Key Tool (discontinued)
Xhorse Key Tool Max
VVDI KEY TOOL PLUS

 

Xhorse super chip XT27B adds 46, 47 Electric, 49, and MQB chips generation.