How-to: Jeep Compass 2018 up 4A chip all smart keys lost key programming with VVDI KEY TOOL MAX and VVDI MINI OBD TOOL.
Devices required:
VVDI key tool max
VVDI Mini OBD tool
Step 1: Generate remote with key tool max
Insert Xhorse universal remote into vvdi key tool max‘s induction coil
Run Xhorse App
Select Vehicle Remote->Jeep->Compass-> 2017+ KeylessGo ID4A
Run Xhorse App
Select Vehicle Remote->Jeep->Compass-> 2017+ KeylessGo ID4A
Press Generate Remote
Generating remote in progress
Burn success.
Step 2: Program key with vvdi mini obd
Connect VVDI Mini OBD tool with vehicle via OBD socket
Open VVDI Mini Tool App
Select Immo Programming->Jeep->Select from model->Asia->Compass->2018 up->Keyless->Delete Smart Keys
Open VVDI Mini Tool App
Select Immo Programming->Jeep->Select from model->Asia->Compass->2018 up->Keyless->Delete Smart Keys
Turn off ignition switch, turn on the security warning light
Make sure all doors are closed. This function will delete all keys, you must make sure there is at least one programmed key. All keys not present will be invalid.
Keep the smart key close to start button or at the gear lever
Security access in progress
Keep the key to be matched close to start button, press then release UNLOCK button within 10 seconds, then wait for the key to program success.
Program successfully.
You can continue add next key yor exist to test the new key.
Remote control works. The key can start vehicle as well.
Done.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.