VVDI Prog Read Ford Fiesta 2015 Dashboard 1M12S Success

Test feedback: Read Fiesta 2015 Dashboard 1M12S
Chip dst 80 bit

Success with Xhorse VVDI Prog programmer
Ready only with the board

http://www.vvdishop.com/

http://blog.vvdishop.com/vvdi-prog-read-ford-fiesta-2015-dashboard-1m12s/

VVDI2 Configuration File Database Free Download

Error:

Attention: VVDI2 database file released newest version: V1.0.0, Please update
your software with VVDI2-Update tool.

VVDI2 database file lower version may cause some function failed. WE
STRONGLY SUGGEST YOU UPDATE TO LATEST database file.

Solution:

Update VVDI2 Configuration File via upgrade kit

Or download VVDI2-Configuration file database here directly:

VVDI2-Configuration FileV100 .exe

www.vvdishop.com

http://blog.vvdishop.com/xhorse-vvdi2-database-file-error-solution/

Xhorse VVDI Prog Read VW Jetta –2008 IMMO Box Data

New test report: read VW Jetta year 2008 4th generation immo box BCM data success by using Xhorse VVDI Prog programmer & TMS370 adapter.

Solder TMS370 adapter to VVDI-Prog

Open VVDI Prog software

Select 4-Immobilizer-> VW->Jetta-IMMOBOX(–2008)

Check connection wiring diagram

Read IMMO box data

Save data.

Done.

www.vvdishop.com

http://blog.vvdishop.com/xhorse-vvdi-prog-read-jetta-2008-immo-bcm/

Free Download Xhorse VVDI2 V5.5.0 Software (2018-05-15)

Xhorse VVDI2  key programmer latest software version V5.5.0 released on May 15th, 2018.

*** 2018-05-15
*** Require firmware V5.5.0
************************************************* *********************
===== VAG V5.5.0 =====
1. Add support for 2012-2014 MQB(Continental/VDO) immobilizer and mileage. Support following cars:
a. VW Golf7 (2012-2014)
b. Skoda Octavia3 (2012-2014)
c. Audi A3 (2012-2014)
d. Seat Leon (2012-2014)
2. Bugfix for old bentely (2006 kline) key learning
3. Bugfix for flash VAG firmware(frf, odx, sgo)
4. Bugfix

===== BMW V5.5.0 =====
1. Add support for ISTAP63/64 FEM/BDC, support following version:
a. FEM 0000155E_016_114_020
b. FEM 0000155E_017_110_030
c. BDC 00002419_062_010_020
d. BDC 00002419_071_010_040
2. Bugfix for CAS4 file make key
3. Bugfix

===== Porsche V5.5.0 =====
1. Bugfix

===== PSA V5.5.0 =====
1. Bugfix

===== Transponder Programmer V5.5.0 =====
1. Add support for make proximity remotes – Prepare various proximity remotes with VVDI universal proximity remote(Require database version above 238)
2. Immobilizer data tool: bugfix for Euro->Fiat->Grand Punto 93C86
3. Immobilizer data tool: bugfix for Asia->Hyundai->Tiburon 2008 29F400
4. Immobilizer data tool: bugfix for Euro->Saab->9-3 1999 68HC05
5. Bugfix

===== Copy 48 (96 bits) V5.5.0 =====
1. Bugfix

===== J2534 V5.5.0 =====
1. Bugfix

===== Online Upate Tool V5.5.0 =====
1. Bugfix

===== Quick Start V5.5.0 =====
1. Bugfix

Free Download Xhorse VVDI2 V5.5.0:

https://mega.nz/#!ukwTEaqK!-Px3Uf0bjDvTfZK2daFK5Stw2dLHSTe9IlTAxAFiEd4

http://www.vvdishop.com/info/xhorse-vvdi2-software-update-to-v550-2018-05-15-21239.html

How to Reset BMW FRM3 XEQ384 using Xhorse VVDI Prog

Here’s the guide to restore the original eeprom from Dflash to repair BMW E-series FRM (BMW Footwell Module) module by using Xhorse VVDI Prog programmer.

Note:

VVDI Prog adds FRM-E-SERIES-XEQ384 and FRM-F-SERIES-XET512 read & write options since version 4.6.8 (check pinout connection to VVDI Prog in the end of the post).

Here takes an example on BMW E-series E71

Step 1: Read Dflash

Connect FRM module with VVDI-prog

Open VVDIprog software

Select MCU->Motorola -MC9S12->9S12XEQ384 unsecured

If vvdi prompts “Partition information error, please select the partition size manually”

Select the partition size EEE:0 sector, DFlash: 128 sectors (32K), press OK

Read and then save Dflash, i.e E71 xe

Step 2: Dflash to Eeprom 

Open Dflash to EEE for FRM3 Software, upload Dflash data just read

Then convert Dflash to eeprom.

(You can use free online FRM3 D-Flash to EEPROM converter here as well: http://tlvps.tomvanleeuwen.nl/frm/)

Save eeprom, i.e: eee_L508991.bin

Step 3: Write EEPROM

Back to VVDI Prog software, select Type 8-Others->BMW->FRM E-series XEQ384

Click Write Partition (will erase Dflash and eeprom data)

Write EEPROM partition to 16 sectors (4K), DFLASH: 0 sector 

Open EEPROM data just converted from Dflash

Click Write tab to write eeprom

Reset FRM success.

Install FRM module back to vehicle.

BMW FRM 2M25J/3M25J(9S12XEQ384) pinout to VVDI Prog

BMW FRM F-series 2M25J (MC9S12XET512) pinout to VVDI Prog

www.vvdishop.com

http://www.vvdishop.com/service/how-to-reset-bmw-frm3-xeq384-with-xhorse-vvdi-prog-6060.html

How to Read BMW X6 2012 MEVD7XX ISN code with VVDI2

With BMW DME ISN cable set, you can read out BMW ISN code on bench without drilling hole for boot pin.

Connect DME ISN cable with engine computer ECU and Xhorse VVDI2 BMW key programmer.

Start VVDI2 BMW software
Choose Key Learn->ECU/CAS ISN
Click read, then processing.
Get BMW ISN successfully

www.vvdishop.com

If you need BMW DME ISN cable, please contact:

Skype: VVDIfactory.com
Whatsapp: +86 13559259147
Email: sales@vvdishop.com

http://blog.vvdishop.com/read-mevd7xx-x6-2012-isn-code-by-vvdi2-and-dme-cable/

Free Download Xhorse VVDI Prog Software V4.7.0 (2018-04-27)

Xhorse VVDI PROG programmer latest software version V4.7.0 released on April 27th, 2018.

VVDIProg 4.7.0 (2018-04-27)
This version DON’t need update firmware
Fix some bugs
1- Added
VVDI PROG USER MUNUAL 4.7.0 version in Doc folder
2-Added MSP series in options under 2-MCU menu TI-MSP430 series
Added in options under 2-MCU -> RENESAS-RH850 series
3-Added CS75-BODY-COMPUTER option in <4-IMMOBILIZER CHANGAN Added under IMMO(MSP430F1232) option 4-IMMOBILIZER SSANGYONG
+ Add EULOVE(2014) option in 5-DASHBOARD CHANGAN
Added GOD-ANGEL(2015) option in
5-DASHBOARD CHANGAN
Added NU-NING(STM8S105C) option in 6-DASHBOARD FOTON>
Added AB12CL(R7F701A033) option under 7-AIRBAG menu BOSCH
Added A205-CHASSIS option in 8-OTHER under BENZ menu
Added VIAGGIO(D70F3628) option in
9-OTHER for FIAT + Added POWER-AMPLIFIER option in 10-OTHER for PORSCHE

Free Download VVDI Prog V4.7.0 software:

https://mega.nz/#!y0ozBSyC!I2BAD9xzyATyfzFc894vPZRlkzG4CNEXCuqpXaovYF8

password:123456

VVDI Prog 4.7.0 new added pinouts:

http://www.vvdishop.com/info/xhorse-vvdi-prog-programmer-update-to-v470-2018-04-27-21238.html