3/31/2020

Mercedes W203 EIS Wiring Diagrams to VVDI Prog

Question:
Did someone try to read Mercedes w203 ezs by wiring diagram?  I tried many times and fail vvdi prog show diagram from one side.
This is diagram all w203 the same but it’s only one side i saw a video on YouTube wiring in two sides by vvdiprog.
vvdi-prog-w203-eis-wiring-1

vvdi-prog-w203-eis-wiring-2
Vvdishop.com solution:
You need to compare the picture with your pcb and the mcu number.
If all same then this is your diagram.
vvdi-prog-w203-eis-wiring-3

vvdi-prog-w203-eis-wiring-4

You need to solder wires on other side also.
The diagram is correct on vvdi prog.
You need to choose the correct EIS type
W203 after 2003 all comes with w209 eis so don’t mix.
vvdi-prog-w203-eis-options

According what type of eeprom you choose
There is more that one w203 eis in vvdi-prog.
At the top rear side and down front side.

check other w203 EIS/EIZ wiring diagrams below:
w203-eis-wiring
Benz EIS-W203 1J35D/xJ74Y
w203-eis 1j35d
Benz EIZ-W203 ST12 1L59W/3L40K/4L40K
w203-eiz-st12
Benz EIZ-W203/W211 HC12 0K50E 3K91D
w203-hc08-wiring
W203 HC08 using EZS adapter
http://blog.vvdishop.com/read-mercedes-w203-ezs-with-vvdi-prog-correctly/

3/30/2020

How to Set Super Chip to TP23 with VVDI Mini Key Tool?

Question:
Why we cannot set super chip xt27 to TP23 with vvdi mini key tool. In menu i don’t have the option to set TP23.
Before this option was active,now its not possible ?

Answer:
Yes, you can set vvdi super chip to TP23.
Do not select Special Function, but go to Generate Transponder option and go to ID48.
set-super-chip-to-tp23-1
set-super-chip-to-tp23-2

set-super-chip-to-tp23-3

Go to ID48 and then it will give you a choice as to which one you want, Audi, VW, Skoda, Seat
set-super-chip-to-tp23-4
i.e  if you want TP23 chip to use on golf 5, select Golf 5 -> mini online clone , use normal id48 or super chip, no need for precoded, normal id48 chip = 1 euro.
but you can also set one chip Tp23 and program with other working programmers.

3/29/2020

VVDI Toyota 8A OBD All Keys Lost Adapter FAQs

Q: Why we need this VVDI Toyota 8A adapter?
A: With this 8A AKL adapter, users can program Toyota 8A non-smart key ( on Levin, Corolla, RAV4, Parado, Land Cruiser, Camry, Highlander, Reiz, Sienna etc models) via OBD without disassembling immobilier box.
toyota-8a-akl-adapter
Q:Does this need a subscription for Toyota or is this a bypass..
A: Bypass.

Q: Does it support new 2020 Toyota keys?
A: Yes.


Q: Does a programmer of the degree need hello besides this adapter?
A: The adapter cannot be used alone. It should be work with vvdi2 or key tool max+ mini obd tool.
Q: Do you have instructions of the how to use (wiring diagram)?
A: Instructions and wiring diagram will be posted when it is for sale. Keep updating.
Q: Can it be used simultaneously with a barracuda?
A: No. Barracuda is a ecu programmer. The adapter require a OBD programmer to program key.

Q: Even without vvdi2 i can use it with mini obd tool?
A: The 8A adapter can be used with vvdi2, key tool max+ mini OBD tool.

Q: Toyota Aygo 2015 System H all keys lost. Does this kit program the chip?
A: Yes, it can.

Q: And what all do the Toyota 8A cable work on?
A: obd ready toyota for H type 8A could be 2019 or 2020

Q: Proximity or just keyed?
A: Not smart key. Just key.

Q: Possible to program smart key Land cruiser after 2016?
A: Yes, it will.

Q:Is possible to use Vvdi2 and VVDI key tool?
A: It can be used with vvdi2, but no vvdi key tool.

Q:How much for the whole kit (vvdi key tool max+ mini OBD tool + 8a adapter)
A: $697.

Keep updating…
www.vvdishop.com

3/26/2020

Read BMW EDC17C50 ECU ISN with VVDI Prog on Bench

How-to: Read BMW EDC17C50 ECU ISN with Xhorse VVDI Prog and Bosch ECU adapter on bench.
vvdi-prog-edc17c50-isn-1
Read out BMW ISN code without opening ECU.
ISN is need for all keys lost or ecu readaption to used car.
Require to use Bosch ECU adapter to read on bench.
Connect vvdiprog with Bosch ECU adapter follow the wiring diagram (check wiring in vvdi-prog)
vvdi-prog-edc17c50-isn-2

vvdi-prog-edc17c50-isn-3

vvdi-prog-edc17c50-isn-4
Feed up with 14v power supply
vvdi-prog-edc17c50-isn-5
Open vvdi prog software, select 10-BOSH ECU Adapter->BMW->EDC17C50 Fxx (Adapter)
vvdi-prog-edc17c50-isn-6
Check wiring diagram
vvdi-prog-edc17c50-isn-7
Read ECU data
vvdi-prog-edc17c50-isn-8
Read ISN code succeed
vvdi-prog-edc17c50-isn-9
Operation completed. Save data.
vvdi-prog-edc17c50-isn-10
Done.

Burn Xhorse Remote to Double Points in March 2020

Xhorse is rolling out another event in March 2020–Burn each vvdi remote (for the first time) will get double points.

Generate Xhorse remote & points before event:
wired remote:  25 points each
wireless remote: 40 points each
super remote 40: points each
smart remote 60: points each

From March 1st, 2020 to March 31st, 2020,  it will be :
wired remote  50 points each
wireless remote 80 points each
super remote 80 points each
smart remote 120 points each

The points can be added to your vvdi devices before April 15th, 2020. 

Bonus points can be used to exchange to token (for id48 96bit cloning). 100 points= 1 token.
vvdi2, key tool and key tool max share points each other.



Check also:

3/24/2020

VVDI Key Tool Unlock Nissan AES 4A Proximity

Unlocking Nissan proximity smart remote with vvdi key tool succeed.

Prox information:
Nissan AES 4A smart key A232800800 5BTN 433MHz
nissan-proximity-unlock-vvdi-1
Wiring connection:
nissan-proximity-unlock-vvdi-2

nissan-proximity-unlock-vvdi-3

nissan-proximity-unlock-vvdi-4
Renew prox succeed
nissan-proximity-unlock-vvdi-5

nissan-proximity-unlock-vvdi-6

nissan-proximity-unlock-vvdi-7

VVDI mini key tool adds remote renew function as well. You need to use extra renew cable.

3/19/2020

VVDI Prog V4.9.2 adds FRM XEQ384 XEP100

Xhorse VVDI Prog programmer software released to V4.9.2 (2020-03-16).

VVDI-Prog V4.9.2
* This version DON’t need update
firmware
+ Add VVDI PROG USER MANUAL 4.9.2
version in Doc folder
+ Add STM32F405RG,
STM32F405OG,
STM32F405VG,
STM32F405ZG,
STM32F405OE,
STM32F407VE,
STM32F407ZE,
STM32F407IE,
STM32F407IG options in
<2-MCU>-><ST-STM32>
+ Add FRM-E-SERIES-XEQ384-READ,
FRM-E-SERIES-XEQ384-WRITE,
FRM-F-SERIES-XEP100-READ,
FRM-F-SERIES-XEP100-WRITE,
FRM-F-SERIES-XET512-READ,
FRM-F-SERIES-XET512-WRITE options
in <8-OTHERS-><BMW>
+ Add ENVISION—TAILGATE-COMPUTER
options in<8-OTHERS-><BUICK>
+ Add PHAETON—TAILGATE-COMPUTER(2012)
options in<8-OTHERS-><VOLKSWAGEN>


3/18/2020

How to Get VVDI Key Tool Max ID48 96bit Token?

Problem:
I got the ID48 96bit license activated on the vvdi key tool max. But not free tokens for id48 96 bit,something wrong made?
vvdi-key-tool-max-id48-96bit-token-1

vvdi-key-tool-max-id48-96bit-token-2

vvdi-key-tool-max-id48-96bit-token-3
VVDISHOP solution:
VVDI Tool Max does not come with 1 free id48 token everyday. You have some bonus points, 100 points can be exchanged to 1 token. You can also use remote key to collect points. vvdi2, key tool and key tool max share points each other. 
You can also purchase token separately.
VVDI MINI Key Tool comes with 1 free token everyday one year.