Xhorse VVDI Tools, VVDI2, VVDI MB, VVDI Prog, VVDI key tool, VVDI BMW etc software & firmware download, update and technical support from vvdishop.com.
Xhorse Multi Prog has built-in MQB48 (NEC35XX Lock) and BMW Bench ISN (MSV90/MSV80/MSD80/MSD81/MSD85/MSD87 ) reading licenses.
If you see licenses are not activated, need to sync device.
How to Sync Xhorse Multi-prog?
Connect multiprog device with PC
Go to Update Online tab-> Authorization management
Press Synchronization and press OK
*MQB48 license also needs to combine device with vvdi2 full or Key tool plus to activate it.
https://www.vvdishop.com/service/how-to-sync-xhorse-multi-prog.html
Xhorse Multi Prog programmer released new software version 1.1.2.0 on Feb, 26th, 2024.
Database V11
2024-02-26 14:36:44
* MCU STM8S and STM8AF series wiring diagram update.
* MQB dashboard options process optimization and wiring diagram update.
* Repair NATS5-IMMO option in <IMMOBILIZER>-><NISSAN>
+ Add SPC582B50,
SPC582B54,
SPC582B60,
SPC584B60,
SPC584B64,
SPC584B70,
SPC584C70,
SPC584C74,
SPC584C80,
SPC584E84,
SPC584G80,
SPC584G84,
SPC584N80,
SPC58EC60,
SPC58EC70,
SPC58EC74,
SPC58EC80,
SPC58EE84,
SPC58EG80,
SPC58EG84,
SPC58EN80,
SPC58EN84,
SPC58NE84,
SPC58NG84,
SPC58NH92,
SPC58NN84
options in
<MCU>-><ST>-><SPC58XX>
+ Add MQB-LOCK(D70F3423)-READ(WELD),
MQB-LOCK(D70F3423)-WRITE(WELD)
MQB-LOCK(D70F3426)-READ(WELD),
MQB-LOCK(D70F3426)-WRITE(WELD)
MQB48/49/5C-LOCK(R7F701401)-READ,
MQB48/49/5C-LOCK(R7F701402)-READ,
MQB48/49/5C-LOCK(R7F701404)-READ,
MQB48/49/5C-LOCK(R7F701407)-READ options in <DASHBOARD>-><VOLKSWAGEN>-><MQB>
+ Add AUDI Q3 DASHBOARD(2018–)(D70F3426)-READ, AUDI Q3 DASHBOARD(2018–)(D70F3426)-WRITE options in <DASHBOARD>-><AUDI>
+ Add Q7 BCM2 J393(2016)(SPC5646C) option in <IMMOBILIZER>-><AUDI>
+ Add MOTO REPAIR-MC9S12XS256 option in <IMMOBILIZER>-><BMW>
+ Add PCX(MC9S12G64) option in <IMMOBILIZER>-><HONDA>-><PCX>
+ Add CRV(R7F701033)(WELD), XRV(D70F3634)(WELD), AVANCIER(R7F701033)(WELD), BREEZE(R7F701033)(WELD), VALEO MOTORCYCLE EPROM options in <IMMOBILIZER>-><HONDA>-><HONDA>
+ Add BCM(D70F3634)(WELD) option in <IMMOBILIZER>-><HONDA>-><Vezel>
+ Add GEELY AIRBAG(R7F701018) option in <AIRBAG>-><GEELY>
+ Add Lithium Battery(MC9S12XET256) option in <Other>-><BYD>
+ Add JIEFANG DRAGON_V BCM option in <Other>-><FAW>
Requires extra MQB RH850/V850 cable for Multi Prog (purchase separately).
Keep updating more RH850 types.
It will MQB RH850 dashboard only, cannot write. Read data and upload to vvdi2 or vvdi key tool plus to program key.
Combine multi-prog with vvdi2 or key tool plus will get free MQB license.
MQB48/49/5C R7F701401 dashboard pinout
MQB48/49/5C R7F701402 dashboard pinout
MQB48/49/5C R7F701404 dashboard pinout
MQB48/49/5C R7F701407 dashboard pinout
Update software online. Press Update Online tab to update software, firmware and database.
It is a Renault SID301 ECU from a Renault Megane 2. It was water damaged. Need to read it and copy to another ECU. This ECU is really cheap and don’t want to repair.
We can read this ECU with Xhorse Multi Prog via BDM.
Pinout is included in the multiprog documentation.
Select Renault->SID301
Check wiring diagram
Connect SID301 ECU with multiprog via MCU adapter follow the wiring diagram
Pinout is included in the multiprog documentation.
Solder carefully, don’t mix up the connection.
Double-check connection and make sure everything is connected to the device.
Then go to multi prog software.
Select Renault SID301.
Read chip ID
Read EXT eeprom
It was readed 100% now we are in the verify State and we have data overall. It took 12 seconds to read the eeprom memory.
Save eeprom. It reads eeprom very fast (28s).
Let’s read EXT flash data
Reading flash takes longer, but it worked.
It takes 8min 32s to read the flash data.
Then you can write original eeprom and flash to a donor ECU.
Problem:
Could someone help me with the cloning of a key it’s for a ford f150. with 4D 80bit transponder. Failed to clone key using vvdi mini key tool via super chip XT27.
Here is the clue.
Not possible to clone the 80bit chip. You cannot clone an 80 bit chip.
You have to generate and program the key afterwards.
That one is not cloned, the chip is generated and it programmed without problem.
Xhorse has recently put out 4 sets of 2024 exclusive adapters for Xhorse Multi-Prog Programmer, which can read and write SOP44, TSOP48 flash chips or common 8-pin chip. With these adapters, engineers can accomplish data reading tasks more easily.
.jpg)
| Image | Adapter | Model | Method | Usage |
| SOP44 & TSOP48 Adapter | XDMP04GL VH24 | By soldering | Read & write SOP44/TSOP48 package parallel FLASH chips. Eg. AM29FXXX, M29FXXX, TB28FXXX series. | |
| EEPROM & FLASH Adapter | XDMP05GL VH29 | By soldering | Read & write common 8-pin chip data. | |
| SOP44 Adapter | XDMP06GL VH30 | Solderless | Solder-free reading & writing SOP44 package parallel FLASH chips. Eg. AM29FXXX, M29FXXX, TB28FXXX series. | |
| TSOP48 Adapter | XDMP07GL VH31 | Solderless | Solder-free reading & writing TSOP48 package parallel FLASH chips. Eg. SST36VFXXX, AT49BVXXX, W19BXXX series. |
To get the professional adapters, please visit www.vvdishop.com
Problem:
I need to program key for my Toyota RAV 4 2016, lost all keys using xhorse vvdi mini obd tool and 8A non-smart key adapter. But the app says the adapter was bound to other devices. Any solution?
Solution:
8A adapter can only be bound to 1 xhorse device (key tool max pro, vvdi2, key tool plus or vvdi mini obd tool).
Must use the adapter with the device already combined.
For example, if bind 8A control box adapter with vvdi2, you cannot use it with mini obd tool.
How-to: program 2017 Dodge Grand Caravan All keys lost using the Xhorse VVDI Mini OBD Tool and mobile phone via OBD.
Connect Mini obd tool with car via OBD connector
Run Xhorse app on mobile phone
Select IMMO Programming->Dodge->Select by area-> North America->Grand Caravan->2010-2020->Toothless rotary key
Read password (PIN code)
Select Add key
Insert key to be added and turn the ignition on
Enter pin code to proceed
Add key successfully by xhorse mini obd tool
Test the new key. It works.
Done.
