CAS Plug for VVDI 2 to make EWS and CAS1-3+ key

BMW Multi Tool EWS and CAS key programmer firmware will not be upgraded in the feature. VVDI 2 comes to replace BMW Multi Tool. VVDI 2 uses different CAS Plug as BMW Multi Tool. 

CAS PLUG for Xhorse VVDI2 Commander Programmer

1. It connect to device OBDII port,
2. It is used for EWS, EWS 2, 7 Series CAS1/CAS2 plug and CAS3/CAS3+ plug.
3. By using CAS Plug, you can connect CAN LINE manually, support 12V.

By using CAS Plug, you can connect CAN LINE manually, supports 12V. This cas plug need use together with VVDI 2.

A new version CAS Plug for VVDI 2

The old version CAS Plug for BMW Multi Tool

Free download VVDI Prog V4.4.4 software

Xhorse VVDI Prog ECU programmer software new V4.4.4 released at obdii365.com. Software free download:

Software Version: V4.4.4
Firmware Version:1.2.2

VVDI-Prog V4.4.4 Software Download

VVDIProg V4.4.4 update feature (2016-4-25)

* This version DON't need update
  firmware
* Fix some bugs
* Change some prompt information
* Fix MC9S12 seires some types
  write EEPROM error
+ Add upgrade info prompt, when the
  new version software upgrade auto
  display the update information
+ Add Frequency Set botton in
  MC9S12 seires UNSECURED version,
  support manual set frequency or
  search the right frequency from
  MC9S12_BADURATE.cfg in Data folder
  (support add frequency parameter)
+ Add Frequency Set botton in
  RENESAS-V850 seires, support manual
  set frequency or search the right
  frequency from V850_BADURATE.cfg
  in Data folder
  (support add frequency parameter)
+ Add Frequency Set botton in
  RENESAS-R5F61XXX seires, support
  manual set frequency or search
  the right frequency from
  R5F61XXX_BADURATE.cfg in Data folder
  (support add frequency parameter)
+ Add MC9S08AC8_UNSECURED,
  MC9S08AC16_UNSECURED,
  MC9S08AC32_UNSECURED,
  MC9S08AC48_UNSECURED,
  MC9S08AC60_UNSECURED,
  MC9S08AC96_UNSECURED,
  MC9S08AC128_UNSECURED,
  MC9S08AW8_UNSECURED,
  MC9S08AW16_UNSECURED,
  MC9S08AW32_UNSECURED,
  MC9S08AW48_UNSECURED,
  MC9S08AW60_UNSECURED,
  MC9S08DV16_UNSECURED,
  MC9S08DV32_UNSECURED,
  MC9S08DV48_UNSECURED,
  MC9S08DV60_UNSECURED,
  MC9S08DV96_UNSECURED,
  MC9S08DV128_UNSECURED,
  MC9S08DZ16_UNSECURED,
  MC9S08DZ32_UNSECURED,
  MC9S08DZ48_UNSECURED,
  MC9S08DZ60_UNSECURED,
  MC9S08DZ96_UNSECURED,
  MC9S08DZ128_UNSECURED,
  MC9S08EL16_UNSECURED,
  MC9S08EL32_UNSECURED,
  MC9S08FL8_UNSECURED,
  MC9S08FL16_UNSECURED,
  MC9S08GB32_UNSECURED,
  MC9S08GB60_UNSECURED,
  MC9S08GT16_UNSECURED,
  MC9S08GT32_UNSECURED,
  MC9S08GT60_UNSECURED,
  MC9S08JS8_UNSECURED,
  MC9S08JS16_UNSECURED,
  MC9S08QA2_UNSECURED,
  MC9S08QA4_UNSECURED,
  MC9S08QD2_UNSECURED,
  MC9S08QD4_UNSECURED,
  MC9S08QG4_UNSECURED,
  MC9S08QG8_UNSECURED,
  MC9S08SE4_UNSECURED,
  MC9S08SE8_UNSECURED,  
  MC9S08SH4_UNSECURED,
  MC9S08SH8_UNSECURED,  
  MC9S08SL8_UNSECURED,
  MC9S08SL16_UNSECURED options
  in <2-MCU>->
+ Add R5F61723 option
  in <2-MCU>->  
+ Add QUADROCYCLE(2011) option
  in <3-ECU>->
+ Add H2-BCM option
  in <4-IMMOBILIZER>->
+ Add BENBEN,
  S35,
  JINNIUXING,
  YUEXIANG options
  in <5-DASHBORAD>->
+ Add CAPTIVA(2008) option
  in <5-DASHBORAD>->
+ Add VENUCIA-R50(2014),
  XIAOKANG(2014) options
  in <5-DASHBORAD>->
+ Add BESTURN-B50,
  BESTURN-B90(2014),
  BESTURN-X80(2013),
  VITA(2008) options
  in <5-DASHBORAD>->  
+ Add FOCUS(09-10) option
  in <5-DASHBORAD>->  
+ Add C30(2010) option
  in <5-DASHBORAD>->  
+ Add S5 option
  in <5-DASHBORAD>->  
+ Add LUXGEN option
  in <5-DASHBORAD>->      
+ Add QASHQAI(2011) option
  in <5-DASHBORAD>->      
+ Add BAOJUN730(2015),
  ROEWE550,
  SGMW-WULINGZHIGUANG options
  in <5-DASHBORAD>->      
+ Add S40(2006-08),
  S40(2010),
  XC60(2012) options
  in <5-DASHBORAD>->      
+ Add V5 option
  in <5-DASHBORAD>->          
+ Add Z300(2013) option
  in <5-DASHBORAD>->    
+ Add ISM-W221,
  LU-W221,
  SAM-W221 options
  in <7-OTHER>->    
+ Add RFA option
  in <7-OTHER>->    
+ Add PASSAT-B6-PBCM option
  in <7-OTHER>-> 

How to update VVDI Prog software
http://blog.obdii365.com/2016/05/16/vvdi-prog-v4-4-4-software-free-download/

VVDI MB Tool program MB W221 and W204 all key lost

Here are VVDI Benz factory engineer solution to new Mercedes Benz W221 and W204 all key lost.

I.W221 ALL KEY LOST

Q: I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
Describe step by step procedure
A: you have used/seconds-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success

by the way,if your all key lost W221 is motorola EIS,not need to change EIS,remove eis get eeprom by programmer( Xhorse VVDI PROG).
then load eeprom to VVDI MB BGA TOOL prepare key file.

II. W204 ALL KEY LOST
Q: I have a w204 All key lost and i program a new EIS with VVDI MB Tool, the ignition doesn’t come on or crank, but the steering can lock and unlock. can someone guide me what to do?
A: W204 all key lost(change new EIS),refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success.

You are at you own risk if you are not familiar with VVDI Benz key programmer.

http://blog.obdii365.com/2016/05/11/mercedes-w221-and-w204-all-key-lost/

VVDI Prog failed to read BMW CAS4-1L15Y solution

Problem:
I tried to read BMW CAS4-1L15Y ECU with original Xhorse VVDI Prog ecu programmer, but failed. Then I followed the VVDI-prog factory instruction,still failed to read it. So i contact obdii365.com engineer for help. It worked 100%.


Here is the final solution:

Take off the component between GND-C and CLK IC circuit. It will read.

www.obdii365.com

VVDI Benz MB BGA Tool vs. Simon Touch

A Mercedes key programming learner’s question:

“I’m looking for a good device that can program keys for Mercedes cars.

I heard that VVDI MB BGA tool very good is but must pay for each password calculation.

How about Simon Touch Full is it good?

Witch tool is more worth the money?”

VVDI MB BGA TOOL

SIMON TOUCH

Answers from some experienced locksmith:

VVDI MB Tool can add key if car is having BGA key, simon tool can not.
VVDI can erase used EIS if you know password, simon tool cannot
VVDI can copy old EIS and write to new one, simon tool can not
VVDI can do keyless go key, simon are working on it

VVDI MB ONLY BGA key On line calculation need tokens,other not need tokens,nec key not need tokens.!

VVDI Benz will free upgrade.

simon tool can repair a block ESL nec, VVDI can not
simon tool don’t need token, VVDI require token
simon tool can renew key NEC without soldering, VVDI need solder
simon tool can do odometer for 2010 to 2013, VVDI not doing
simon tool can read motorola EIS password through IR, VVDI not support

SIMON and Legend not good because not have any support ,
They are not company, they are personal , not have Commitment to our Customers
They are only seller .
They only know money money money ….

I see a lot of people saying that Simon Touch equipment and service are bad though most of the people saying this don’t even own the equipment. I used to use MBE and it worked good, though I was annoyed when they brought out an update that stopped you being able to programming Chinese keys, if that isn’t about money what is.
Anyway some equipment was stolen a while ago and so I made a move to Simon Touch and as far as key programming goes it is 100%, it programs all after market keys, repairs radio byte and can disable keys through IR etc.
With regards support I had an issue with reading passwords from NEC and so I had Simon Touch on team viewer who flashed the STMT device which didn’t work so they sent a new STMT device out which arrived a week later and all has been good since then.

Conclusion:

Comparing to what Xhorse has done with Benz in less then 6 months no other tool has done it in years.
You can not compare Simon Touch with VVDI. Why ? Because ST wont get update anymore , while VVDI is always updating and more functions.
1st No other Tool in the market at this moment cz calculate BGA password within less then 10 minutes. ST can not
2nd Renewing W204 without opening it in less then 2 minutes and activate it with EIS in other 2 min all BY OBD , ST can not do it that fast and that easy
3rd FBS3 2010 all key lost key programming as well in 10 minutes. YES you need 2 tokens, but you are getting paid for it x 10 if not more.
4th ECU , ISM , Gear Renew free no token in 10 minutes, ST can not.
now u will say ST can renew dead ELV NEC , well guess wt so will VVDI soon, and more surprises are coming in the next update, why i trust them they will ? Cause so far everything they said they will they are doing it
plus did i mention that u can renew and program Keyless GO?
By the way at this moment there is any other tool in market can do whatt VVDI can for the money you are paying. 2k comparing to 7 or 8k for other tools that did half what vvdi benz mb bga key programmer can do now.

http://www.key-programmer.org/2016/05/04/vvdi-bga-simon-touch-or-legend/

Complain VVDI MB BGA tool cannot write NEC?

Some Mercedes locksmith complained Xhorse VVDI MB BGA tool cannot write NEC, even the worst and cheapest tool from can read /write /erase nec key !!! Here are factory engineer and VVDI Benz users’ feedback.

Maybe xhorse are sponsor sing BE keys instead of nec key ?!?!?!?!

ESL renew and repair do not work!

Cannot read pass from eis old style!!!

Better to wait some months and see if they will evolve their tool.

Factory engineer reply:

Write NEC function still verifying data,if ok will be released in this week.

ESL renew function absolutely work ok,if ESL damaged you should change ESL(not support repair function)

Under developing function all show in User Manual.other functions of course work ok.

Customers comment (1):

Before the tool came out everyone was dying to have a solution for BGA Pass. some were ready to pay anything just to get this solution. and now after Xhorse introduced the VVDI MB Tool which is very cheap ahead of any other company which works GREAT on password. We are supposed to satisfy it.

the tool have bugs ??? of course it has, they are human working on it.

u want it fully tested before releasing ? then wait few more months for it and stop complaining why no one has released the BGA pass.

it doesnt write nec ?? It is an issue yes but who cares ?

everyone who works in BENZ has a nec programmer , just wait for it , NEC issue isn’t a big deal for Xhorse i m sure they will solve it. for once be grateful cause you have a tool that cost pennies comparing to other tools that most now still cant do ~~~~ about BGA.

Customer comment (2):

Yes, bga solution not cost much money

olthers company sell product without bga function 2 times more

nec not write in pcb not problm erase solder on key pcb and write via ir

me test 5 ezs w212 withou elv w2012 elv and w204 all ok get password easier not more than 12 min for all job,

so please freinds not say anything be logical.

http://www.key-programmer.org/2016/05/05/vvdi-mb-bga-tool-cannot-write-nec/

Xhorse VVDI 2 key programmer software update to V1.1.3

Original Xhorse VVDI 2 Commander VAG/BMW/Porsche key programmer software newly updated to V1.1.3.

Free download VVDI 2 V1.1.3 installer

https://mega.nz/#!78YGATbB!7dnyWQYkDkRok_a0jXTjdxYndebsWExrFsfBJsyOIe4

VVDI2 V1.1.3 updated features:

===== VAG V1.1.3 =====
1. Add decode 95160 EEPROM for touareg 2008
2. Fixbug for read PIN and CS in med17.5 ECU
3. Fixbug for passat B6 find 7th bytes CS
4. Added guided functions: ECU/ABS following: (other modules will add soon)(Menu->Diagnostic->Guided Functions)
Engine:
Activation of cruise control
Throttle adaptation – Otto engines with Drive-By-Wire
Turning on Pre-Fuel pump (eg. for bleeding)
Injectors checking 3.0/2.7 TDI
Pump-jet checking 1.9/2.0 TDI
Adaptation of turbocharger in 2.7/3.0TDi engines
Adaptation of flap motors in 3.0/2.7 TDi engines
Testing Mass air flow meter G70 in TDI engines
Chiptuning test
Adaptation of G336 sensor (intake manifold’s flaps) in 2.0TFSi BPY/AXX
Adaptation of Turbocharger sensors used in CBAB CBAC 2.0TDi CR engines
Adaptation of EGR valve in Gasoline engines
Adaptation of start quantity in TDI VP Engines
Start/Stop deactivation in MQB cars (Golf 7, Octavia 3 etc)

ABS:
Calibration of G85 sensor
FillingUp Brake system (MK60/70 – Golf V / Passat / Altea / Leon)
Enable / Disable \”SystemTest\” for ABS/ESP
Calibration of ESP acceleration sensor G200
Calibration of ESP pressure sensor G201
Calibration of ESP acceleration sensor G251
LHD/RHD ESP Coding
Recoding ABS/ESP variant (USA/EU)
ESP sensor calibration G200,G202,G251 in cars newer than 06.2007
Adaptation ESP ECU for DSG Gearbox in Audi A3 8P MJ2006
Total deactivation/activation of ESP MK60EC1

===== VVDI2 BMW V1.1.3 =====
1. Add support for lost all key with newest firmware: 9395656, 9395657, 9389115, 9389116
2. Improvement file make key window, show VIN, key cutting code, remote frequency, ISN etc
3. Add disable/enable key for CAS1/2/3/3+/4/4+ in file make key
4. Fixbug for EWS4 KM
5. Fixbug for change KM 5M48H with error checksum
6. Bugfix

===== Porsche V1.0.5 =====
1. Bugfix

===== Transponder Programmer V1.1.3 =====
1. Add new window for Hitag3, support read/write page with password
2. Immo data tool bugfix: Renault Trucks Magnum 2000 – 93C46
3. Immo data tool bugfix: Daihastu Sirion -2003 93C66(4C)
4. Immo data tool bugfix: Euro Gilear Fuoco ST10F269
5. Immo data tool bugfix: Ducati Monster 696
6. Immo data tool bugfix: Renault Laguna II 95160
7. Immo data tool bugfix: Mercedes benz Vito 68HC
8. Immo data tool add new for toyota 93C66
9. Bugfix

How to update VVDI 2 Key programmer software & firmware?

http://blog.obdii365.com/2016/05/02/vvdi-2-update-to-v1-1-3/