4/26/2017

Tips to to VVDI2 to Program Key for New Audi A6L, Q7

Newer Audi A6L or Q7 had dead dashboard with a black screen and failed to communicate? All these caused by wrong reading data. Here is the possible solution from Xhorse VVDI2 engineers.

Models:
Audi Q7 2015
Audi A6L 2013
Some other models that replaced J518 CPU

Key programmer optional:
AVDI
VVDI2 key programmer

Symptom after the car was dead:
The gateway cannot be activated!
Keys cannot programmed even online!

Solution:
Change another new CPU or reflash J518 data
J518-cpu
Engineer analysis of the cause:
The FLASH data in new models’ CPU differs a lot from the old’s/ earlier’s.
flash-data
Attention please when read EEPROM data with AVDI, VVDI2, or AP!
If you use the default capacity: 128, then the car will be dead.
But select 256 as capacity, it would be OK.
Unluckily, AVDI, VVDI2 VAG, and AP cannot automatically recognize J518 capacity; so usually, DEAD.
audi-a6-J518-cpu-1
audi-a6-J518-cpu-2
So as for new models to add new keys, please manually select 256 as J518 cpu capacity with VVDI 2 commander key programmer.

AT YOUR OWN RISK to try.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.