Free Download Xhorse VVDI2 V6.6.5 Software

Xhorse VVDI2 key programmer software update to V6.6.5 on Aug. 29th, 2019.

*** 2019-08-29
*** Require firmware V6.6.5
************************************************************************
===== VAG V6.6.5 =====
1. Improvement for autodetect VAG immobilizer system
2. Bugfix

===== BMW V6.6.5 =====
1. Improvement for CAS4/CAS4+ via OBDII
1). Support unlock CAS4 directly, no need update CAS4 flash
2). Improvement for key learning
2. Bugfix

===== Porsche V6.6.5 =====
1. Bugfix

===== PSA V6.6.5 =====
1. Bugfix

===== Transponder Programmer V6.6.5 =====
1. Bugfix for generate and copy Toyota H chip with VVDI super chip
2. Immobilizer data tool: Asia->Nissan->Note 2004 95080 bugfix
3. Bugfix

===== Copy 48 (96 bits) V6.6.5 =====
1. Bugfix

===== J2534 V6.6.5 =====
1. Bugfix

===== Online Update Tool V6.6.5 =====
1. Bugfix

===== Quick Start V6.6.5 =====
1. Bugfix

Free Download VVDI2 6.6.5 Software 

https://public-ap-southeast-1-1251058331.s3-ap-southeast-1.amazonaws.com/download/product/vvdi2/software/VVDI2-InstallerV665.exe

VVDI2 BMW CAS3+ Encrypted key error Solution

When using Xhorse VVDI2 to program a key for a CAS3++ (CAS3+ encrypted version) I get a fault in the CAS module every time. Other CAS modules like CAS3 and CAS3+ ISTAP version work fine without faults.

It gives an error on the CID and a A0AA CAS: Control Unit fault in ISTA.
The programmed key starts the car just fine but every time you start it with the new key it gives a fault.

It’s in Dutch on the picture but it says something like “Engine starting malfunction! Close and reopen the driver’s door. Remove key fob and insert it again in the slot.”

The error on the CID goes away if you delete the fault memory with ISTA however the A0AA fault still remains in fault memory. The car operates just fine with this fault stored.

I didn’t make downgrade flash. VVDI2 BMW doesn’t need downgrade for cas3++ only for the ISTAP version. Downgrade for ISTAP versions gives no error.

Solution:

You can restore cas to backup state or reflash it with Kfp is the fastest way.

Finally, Just flash it with Winkfp and problem solved.

standard ICOM or a good k-dcan will work and everything will be fine, just keep in mind stable charger is important.

How to Renew E F series key with VVDI key tool

VVDI key tool renewed an E F series key. It can start car but it lost frequency, how to solve? I think it now explains why my renewed keys have no remote lock unlock!!

How-to’s of renewing E F series key:

I try and pcf adapter and in circuit.
The adapter does not detect my chip in the adapter and erases and uploads the eeprom and erom in the circuit but there is no frequency all the time.
My adapter has a 0 ohm resistor.
I do everything through the MCU option as they recommend because the option REMOTE-> BMW-> F series receives a message that the file is of a different size than the memory.
I did through files for HUF and Continental.
I write with VVDI prog and my PCF is 7953.

SOLVED
You must write first Erom and next eeprom.
And this solution not change frequency.
You need to upload files only with which the key was originally.

Delphi MT86 (3500) Gearbox PINOUT to VVDI Prog

Delphi MT86 (3500) Gearbox
Hyundai – Kia

-Read and write ok by ECU reflash cable
-Pinout some as VVDI-Prog manual
-Other operation some as picture

The power should be disconnect and connect before each operation.

Here comes one problem:

i am trying to clone mt86 with 2 infineon inside , i tried to read with vvdi prog the old ecu it says chip not connected i did exactly as the help in vvdiprog. The old ecu have only 3 coils working i don’t know what component is for the coils so i decided clone on other one.

car start with old ecu , and also i tried to read with combiloader it read flash normally i copied on donor ecu but car didnt start so i want to copy whole flash and eeprom with vvdi prog but always chip not connected.

Solution:

In the Delphi MT86 you have 2 Tricore _ TC1766 ( Motor + Gearbox )
To read TC1766 motor you should use this method :
Raise PIN 122 (PIN 122 should be lift).

Good luck.

www.vvdishop.com

BMW 520 F10 & 535 GT CAS4 OK with VVDI2 by OBD

Test vvdi2 new software 6.6.1 on BMW CAS4 OBD programming:

1).

Tested: BMW CAS4 by obd works fine using Xhorse VVDI2. Takes about 10-15min to unlock it. Than key programming with ignition.
BMW 520 F10 2016

Always connected battery when working on BMW.

2)

BMW 535 GT CAS4 ALL KEYS LOST DONE BY VVDI2 BY OBD
BY THE KEY FOE KEYS COPY

Credit to whom shared this information. 

Difference between MINI Key Tool Global, NA and EU version?

What’s the difference between global, NA and EU version? Only proximity remote?
Can I program with EU version MINI KEY TOOL” Universal Smart Proximity Flip Type Key” remotes for these cars:

+Add Jeep Grand Cherokee(2014-2019)

+Add FIAT Freemont(2012+)

+Add FIAT 500L(2016+)

+Add FIAT 500X(2016+)

Peugeot 2008(2016+)

+Add Peugeot 3008(2016+)

+Add Peugeot 308(2016+)

+Add Peugeot Expert(2016+)

+Add Jeep Renegade(2015-2018)

+Add Jeep Compass(2017-2018)

+Add Renault Megane III

+Add Renault Fluence

+Add Renault Scenic III

+Add Renault Grand Scenic III

+Add Renault Laguna III

+Add Renault Captur

+Add Renault Symbol

+Add Renault Clio IV

+Add Renault Megane IV

+Add Renault Scenic IV

+Add Renault Talisman

+Add Renault Espace V

+Add Ford FOCUS(2011-2015)

+Add Ford KUGA(2011+)

+Add Ford FIESTA(2008-2017)

+Add Ford MONDEO(2007-2014)

+Add Ford GALAXY(2010+)

+Add Ford S-MAX(2010-2015)

+Add Ford C-MAX(2010-2015)

+Add Ford Grand C-MAX(2010-2015)

+Add Ford B-MAX(2012+)

+Add Ford Focus(2015-2019)

+Add Ford TRANSIT(2016+)

+Add Ford TRANSIT CUSTOM(2016+)

+Add Ford TOURNEO CUSTOM(2016+)

+Add Ford Aspire(India)

+Add Ford ECOSPORT(India)

+Add Ford C-Max ENERGY(2013-2018)

+Add Ford Edge(2011-2015)

+Add Ford Escape(2013-2018)

+Add Ford Expedition(2015-2017)

+Add Ford Explorer(2011-2015)

+Add Ford Focus(2012-2019)

+Add Ford Taurus(2013-2019)

+Add Ford Flex(2013-2019)

+Add Chevrolet Cruze(2011-2019)

+Add Chevrolet Impala(2019-2019)

+Add Chevrolet Malibu(2013-2019)

+Add Chevrolet Camaro(2010-2019)

+Add Chevrolet Sonic(2012-2019)

+Add Opel Mokka(2018+)

+Add Chevrolet Volt (2017-2019)

+Add Chevrolet Cruze Hatchback (2017-2019)

+Add Chevrolet Traverse(2018-2019)

+Add Chevrolet Camaro (2016-2019)

+Add Chevrolet Malibu (2016-2019)

+Add Chevrolet Cruze(2016-2019)

+Add Honda Accord(2016-2017)

+Add Honda Accord(2013-2015)

+Add Honda Civic(2014-2015)

+Add Honda CR-V(2016-2017)

+Add Honda Pilot(2016-2018)

+Add Honda CR-V(2017-2018)

+Add Honda Civic(2016-2019)

+Add Honda Odyssey(2018-2019)

+Add Honda Fit(2018-2019)

+Add Honda HRV(2016-2019)

+Add Honda Odyssey(2014-2017)

+Add Nissan MURANO – Z51(2009-2015)

+Add Nissan GT-R – R35(2009+)

+Add Nissan MICRA – K13 (2010-2013)

+Add Nissan JUKE – F15 (2012-2014)

+Add Nissan Altima(2016-2018)

+Add Nissan Maxima(2016-2018)

+Add Nissan Pathfinder(2016-2017)

+Add Nissan Murano(2015-2017)

+Add Nissan GT-R(2009-2018)

+Add Nissan 370Z(2009-2019)

+Add Kia Sportage(2011-2013)

+Add Kia Soul(2011-2013)

Official answer:

NA , EU,…it was a region market cover
now you should have GL – Global MINI KEY TOOL
once program options is available – yes, you can program