Use Xhorse VVDI Mini Key Tool to program a Super Chip for Ford Tourneo 2015 is rather fast and easy to be done in 2 minutes.
You’ll need an original working key & a new key for the operation.
Clone Transponder
Transponder clone >> Read transponder
(Put the original working key into Mini Key Tool coil)
Information has read out.
It is transponder 4D+(83) type, Ford/Mazda model, and cloneable.
Clone >> Start clone
(Do not remove the working key)
Successful data upload.
Calculate success.
Remove the working key, put a Super Chip into Mini Key Tool coil.
Wait to be written…
Successful copy.
Press “Complete”.
Now let’s test the new key with Super Chip on it, it can start the engine!
Program Remote
- Switch the key on then off quickly 4 times or 8 times, finally the key is off, the instrument will make a beep.
- Click UNLOCK button of remote to be programmed, until the instrument makes a sound, then release the remote.
- If you need to program more remotes, please repeat step2, click “OK” to exit. After all remotes are completely programmed.
- Note: complete all operations within 10s.
- Program remote success.
Done!
If you require VVDI Mini Key Tool for other version, please contact us.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.