Users are allowed to switch the frequency of Xhorse XKGHG1EN garage remote manually, over 20 frequencies are available.
XKGHG1EN Garage Remote is wired remote, so you need to disassemble the key shell to switch frequency.
Remove cover of the garage remote
Tear off the xhorse logo on the back
Unscrew the screw with a screwdriver
Take out cover and take out the PCB of the garage remote
You can change frequency via xhorse vvdi key tool plus, key tool max, key tool max pro and mini key tool.
Here we use key tool max pro to change garage remote frequency.
Connect key tool max with garage remote PCB via remote programming cable
Select Special Function->VVDI Remote Function->Garage door key customization
Read remote frequency, it is 315Mhz
Press the value that need to be changed, i.e 433MHz
Press Frequency offset KHz
the value needs to be within the range it shows, i.e 26
Press settings to complete the modification
Read xhorse garage remote information again, the frequency now goes to 433MHz.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.