Xhorse VVDI Tools, VVDI2, VVDI MB, VVDI Prog, VVDI key tool, VVDI BMW etc software & firmware download, update and technical support from vvdishop.com.
Problem:
Failed to clone ID48 96bit transponder with xhorse vvdi key tool max Pro. Error request failed. Any solution?
Solution:
1. internet connection issue, change different network connection or try using mobile network (wifi hotspot)
2. Sometimes server is busy. after a few attempts it will work.
Ducati Panigale key programming 1199 reading eeprom with vvdi prog and programming transponder key with Vvdi2.
Choose new key position.
If choose a used key, when you open the switch the dash will ask for pin code.
Read motorola MC9S12P128 mcu with vvdi prog
Write key Ducati 1199 Panigale with vvdi2 via dump.
Problem:
Failed to update xhorse vvdi key tool max pro immo database, any solution?
Solution:
Change WiFi hotspot, update database again.
If still fails, do a factory reset and try again.
Problem:
I was trying to add a new spare key to Bmw x1 2019 BDC with xhorse vvdi2 via OBD.
Now BDC has no communication, error SWFL Lost. Any solution?
.jpg)
.jpg)
Possible reason:
Failed to make sure proper voltage.
Solution:
Now you need to restore flash. You need to bench read flash and repair then write back to BDC.
Try to unlock on bench. Power supply stable at 13.5v. Try several times until flash writes ok.
Feedback:
Solved. Flash with esys and removed bdc job on bench and done!
Toyota Tacoma 2019 (8A proximity) all keys lost programming using Xhorse Toyota XSTO01EN XM38 smart key.
2. Programming all keys lost with xtool x100 pad2 pro.
if you don’t change the frequencies the presence doesn’t work. Just turn it on by moving the key closer to the start button.
Xhorse MVCI Pro J2534 was tested working with VW Audi Skoda Seat ODIS-S service software V23 and ODIS-E Engineer software V17.
Software version: ODIS-S V23.0.1/ ODIS-E V17.01
License: Included License Standalone and License for all brand
Compatible device: Xhorse MVCI Pro (and other passthru devices VXDIAG VCX SE 6154, openport 2, vnci 6154a, godiag j2534 etc)
Operating system: Win10 or later O/S, RAM>4G. Win7 is not supported since this version.
Language: Multi-language
Both software can be downloaded for free. But not include keygen.
If need activation, contact
Skype:VVDIfactory.com
Email:sales@VVDIShop.com
WHATSAPP:+86?13559259147
We will send software in U disk format which contains 1 time free activation for both ODIS-S and ODIS-E software.
Tested models by far:
| Model | VIN | ECU Type | Protocol | ODIS S 11 | ODIS S 23.0.1 | ODIS E 17.01 |
| 2007 AUDI A6 | LFV3A24F273054910 | MED9.1 | KWP2000 | √ | √ | √ |
| 2005 VWCaddy | LFVBC32K053000112 | EDC16U1 | KWP2000 | √ | √ | √ |
| 2007 VW Passat | WVWVU73CX7E001193 | CAN BUS | √ | √ | √ | |
| 2017 VW Passat | LFV3A23C5H3071340 | SIMOS 18.3 | CAN BUS | √ | √ | √ |
| 2008 Audi A6 | WAUDH74F98N068455 | SIMOS 6.22A | CAN BUS | √ | √ | √ |
| 2008 VW Passat | LFV3A23C583003748 | MED17.5 | CAN BUS | √ | MVCI Pro supports full system diagnostics (other J2534 only OBD scan) | √ |
| 2008 AUDI A6 | LFV5A24F783014364 | SIMOS 8.10 | CAN BUS | X | X | √ |
Steps to Install ODIS-S/ODIS-E
1.Install Setup
2.Activate software
3. Install PostSetup
4. Install driver
5. Run software
MVCI Pro J2534 driver is included in the U disk.
Problem:
Programming a Honda ID13 transponder key with xhorse vvdi key tool max and this message came up. Does anyone know how to get the information for “search header info” ? Thank you
Solution:
After you generate the chip is empty without ID.
Go to special funtions >set type of vvdi super chip>set as id13 >settings.
Or use cloning function.
