Xhorse VVDI Tools, VVDI2, VVDI MB, VVDI Prog, VVDI key tool, VVDI BMW etc software & firmware download, update and technical support from vvdishop.com.
How to clone Volvo S60 CEM R5F64524_KFD with Xhorse Multi Prog programmer?
We already backed up the P-flash, Data-flash and eeprom of the original CEM.
Select Immobilizer-Volvo- CEM R5F64524_KFD.
Check wiring diagram.
Read and save Data-flash and eeprom of the donor ECM, respectively.
Write original P-flash data to the donor CEM.
Write Data-FLASH to the donor ECM.
Then write original eeprom data to the ECM.
Done.
Xhorse Multi Prog new user feedback:
Citroen C4 Picasso PSA Delphi DCM6.2A read and write with multi prog in boot mode.
Another one PSA DCM6.2A for scr off…… as usually multi prog manage to write at the end but is you face this situation for first time NEVER PUSH THE STOP BUTTON… IT WILL WRITE IT AT THE END.
This is the Audi air suspension control unit.
The first microcontroller.
Second microcontroller.
In general, there was a problem that at a speed of over 120 km/h, the air suspension dropped into an error for all 4 level sensors, when dropping below 120 km/h, all errors disappeared. It was decided to reflash the unit. It contains 2 Motorola microcontrollers. Xhorse vvdi prog programmer can flash and read them.
The main board of the unit.
Connect the module with vvdi prog.
Select MCU- Motorola MC68HC(9)12- MC912D60 Secured. Read and back up both eeprom and flash data.
UPDATED.
The firmware helped! There are no errors when increasing the speed. I was driving at 160 km/h and the car dropped to the first position.
www.vvdishop.com
VW Passat B8 2015 add MQB48 key successfully.
Using Xhorse VVDI MLB Tool + MQB48 adapter.
No need to remove dashboard.
Open key and collect data from original key.
Photo attached:
Is it possible to use the Xhorse EWS4 adapter with Multi Prog programmer?
Yes, it is possible.
There are two ways to connect the EWS4 adapter with multi prog.
Select EWS4.x (Adapter) option in multi prog software, you will see the connection diagram.
Method 1: Connect the EWS4 adapter with multi-prog via DB15-DB25 adapter.
Method 2: Connect the EWS4 adapter with multi-prog via XDKP30 Multi-function adapter converter.
Each Xhorse VVDI BE Key pro green board comes with 200 points. 200 points= 1 token for VVDI MB. How to check if the Xhorse VVDI BE Key Pro’s points have been used up?
Follow this way to verify VVDI Key Pro points status:
Go to IMMO Programming- Benz-Select from system- Read Write key – VVDI BE Key-Star programming
Select Online verify BE key.
Online check VVDI BE key status, whether it contains bonus points or not.
Check if your VVDI BE key has bonus points or already used up.
Hit OK to check.
In this case, this BE key points was already used. It does not have bonus points.
Anyone who discovers voltage problem or MQB48 key data calculation failure in Xhorse VVDI MLB Tool APP while reading, and after change USB socket still this same or any other problems,
Here is a new software 2.0.5.0 version with some changes.
Free download MLB Tool 2.0.5.0 software to fix MQB48 adapter voltage problems in App.
.jpg)
.jpg)
.jpg)
Xhorse Multi Prog update database version V55 on March, 18th, 2025.
V55
2025-03-18 20:28:05
+ Add Audi Steering Gear(SPC5643L) option in <OTHER>-><Audi>-><Audi>
+ Add ROEWE 360 BCM(2017)(MC9S12XEG128) option in <IMMOBILIZER>-><Saic>-><SAICMOTOR>
+ Add CYT2BL3BAS(SWD),
CYT2BL3BAE(SWD),
CYT2BL3CAS(SWD),
CYT2BL3CAE(SWD),
CYT2BL4BAS(SWD),
CYT2BL4BAE(SWD),
CYT2BL4CAS(SWD),
CYT2BL4CAE(SWD),
CYT2BL5BAS(SWD),
CYT2BL5BAE(SWD),
CYT2BL5CAS(SWD),
CYT2BL5CAE(SWD),
CYT2BL7BAS(SWD),
CYT2BL7BAE(SWD),
CYT2BL7CAS(SWD),
CYT2BL7CAE(SWD),
CYT2BL8BAS(SWD),
CYT2BL8BAE(SWD),
CYT2BL8CAS(SWD),
CYT2BL8CAE(SWD),
CYT2B93BAS(SWD),
CYT2B93BAE(SWD),
CYT2B93CAS(SWD),
CYT2B93CAE(SWD),
CYT2B94BAS(SWD),
CYT2B94BAE(SWD),
CYT2B94CAS(SWD),
CYT2B94CAE(SWD),
CYT2B95BAS(SWD),
CYT2B95BAE(SWD),
CYT2B95CAS(SWD),
CYT2B95CAE(SWD),
CYT2B97BAS(SWD),
CYT2B97BAE(SWD),
CYT2B97CAS(SWD),
CYT2B97CAE(SWD),
CYT2B98BAS(SWD),
CYT2B98BAE(SWD),
CYT2B98CAS(SWD),
CYT2B98CAE(SWD),
CYT2B73BAS(SWD),
CYT2B73BAE(SWD),
CYT2B73CAS(SWD),
CYT2B73CAE(SWD),
CYT2B74BAS(SWD),
CYT2B74BAE(SWD),
CYT2B74CAS(SWD),
CYT2B74CAE(SWD),
CYT2B75BAS(SWD),
CYT2B75BAE(SWD),
CYT2B75CAS(SWD),
CYT2B75CAE(SWD),
CYT2B77BAS(SWD),
CYT2B77BAE(SWD),
CYT2B77CAS(SWD),
CYT2B77CAE(SWD),
CYT2B78BAS(SWD),
CYT2B78BAE(SWD),
CYT2B78CAS(SWD),
CYT2B78CAE(SWD),
CYT2B63BAS(SWD),
CYT2B63BAE(SWD),
CYT2B63CAS(SWD),
CYT2B63CAE(SWD),
CYT2B64BAS(SWD),
CYT2B64BAE(SWD),
CYT2B64CAS(SWD),
CYT2B64CAE(SWD),
CYT2B65BAS(SWD),
CYT2B65BAE(SWD),
CYT2B65CAS(SWD),
CYT2B65CAE
options in
<MCU>-><Cypress>-><CYT2BXX>
+ Add XMC4800-E196x2048,
XMC4800-F144x2048,
XMC4800-F100x2048,
XMC4800-E196x1536,
XMC4800-F144x1536,
XMC4800-F100x1536,
XMC4800-E196x1024,
XMC4800-F144x1024,
XMC4800-F100x1024,
XMC4700-E196x2048,
XMC4700-F144x2048,
XMC4700-F100x2048,
XMC4700-E196x1536,
XMC4700-F144x1536,
XMC4700-F100x1536,
XMC4500-E144x1024,
XMC4500-F144x1024,
XMC4500-F100x1024,
XMC4500-F144x768,
XMC4500-F100x768,
XMC4502-F100x768,
XMC4504-F100x512,
XMC4504-F144x512,
XMC4400-F100x512,
XMC4400-F64x512,
XMC4400-F100x256,
XMC4400-F64x256,
XMC4402-F100x256,
XMC4402-F64x256,
XMC4300-F100x256,
XMC4200-F64x256,
XMC4200-Q48x256,
XMC4100-F64x128,
XMC4100-Q48x128,
XMC4104-F64x128,
XMC4104-Q48x128,
XMC4104-F64x64,
XMC4104-Q48x64,
XMC4108-F64x64,
XMC4108-Q48x64
options in
<MCU>-><Infineon>-><XMC4XXX>
Opel Zafira Denso SH7058 ECU cloning with Xhorse multi prog successfully.
Select ECU- Opel- Zafira- Denso SH70xx_275xxx-xxx. CHeck bench wiring diagram.
Connect original ECU with multi prog.
Read and back up original ECU data (INT flash).
Disconnect original ECU.
Connect donor ECU with multi prog programmer.
Back up donor ECU data.
Select original ECU data and write to the donor ECU.
Correct checksum in progress.
Checksum correction successfully. The data has been verified.
Write data to the donor ECU.
Done.
