April 2018-OBD365.com

4/25/2018

VVDI Prog Read MB C250 W210 MC68HC05 Mask 1H52A

Xhorse VVDI Prog programmer feedback today: read Mercedes Benz C250 W210 EIS MC68HC05X32 mask 1h52a success.

Photo attached:

http://blog.vvdishop.com/vvdi-prog-read-benz-c250-w210-mask-1h52a/

4/18/2018

Audi A1 2018 ID48 96 bit Clone with VVDI Key Tool

New test report: Audi A1 year 2018 ID48 key cloning done by Xhorse VVDI KEY TOOL remote maker.

*You should have Keytool ID48 96bit function activated and download Bluetooth app before operation.

Procedure:

Insert original remote into Keytool left coil to read key data

Select Transponder clone->Automatic detection

VVDI Key tool identify remote information: ID48, TP25 Audi

Remove key

Insert ID48 chip and read chip information

Connect VVDI Key Tool with mobile phone via Bluetooth

Select Transponder Clone function->ID48 data acquisition

Put VVDI Key Tool antenna close to ignition switch or coil detention area

Sniff data
If original key is not smart key, insert the original key, turn on ignition switch, then turn off, pull out the original key, repeat above procedure until sniff data completed.

If original key is smart key, take out the batter of original key, then put original key close to coil detection area and light up cluster turn off the ignition switch, move away the original key, repeat above procedure until completed.

Data acquisition success

Put the original key into the VVDI Key Tool left detection coil, to verify the original key

Read ID48 key data success
Then put the new ID48 chip, press Write button to write chip

ID48 chip copy success.

Sync transponder key

New key works great.

http://www.vvdishop.com/

http://blog.vvdishop.com/vvdi-key-tool-clone-audi-a1-2018-id48-remote-key/

4/16/2018

Renew Mercedes W211 ECU CR3.xx with VVDI MB Tool

How to use VVDI MB tool key programmer to renew Mercedes W211 ecu Cr3.xx?

Connect ECU with VVDI MB BAG Tool and CR3.xx adapter

Open VVDI MB software

Select Renew ECU/Gearbox

Read ECU information

Press Get button to calculate erase password online

Save the eeprom data

Click on Renew Button

Erase target unit success

Read ECU information again

VVDI MB BGA Tool Renew W211 ECU success.

http://www.vvdishop.com/

http://blog.vvdishop.com/vvdi-mb-tool-renew-mercedes-w211-ecu-cr3-xx/

4/13/2018

VVDI Prog and VVDI2 Program Fiat Multipla 1998 IMMO Key

Customer new test report: successfully added a key on a Fiat Multipla year 1998 (European model).

Step 1: Read IMMO data with VVDI Prog

Remove immo ecu and find out chip MC68HC IC 0L32A

Follow VVDIProg wiring diagram to connect ECU with programmer and adapters

Open VVDI Prog software, select 4-Immobilizer->Fiat->immobilizer 0L72A

Read immo data and save eeprom

Step 2: Make dealer key with VVDI2

Go to Transponder Programmer->Immobilizer Data Tool->Select Euro, Fiat Multipla, 1998-68HC0908

Upload eeprom data read by Xhorse VVDI Prog

Select unused key position and make dealer key

http://www.vvdishop.com/service/program-fiat-multipla-1998-key-with-vvdi-prog-and-vvdi2-6058.html

4/12/2018

In Stock Xhorse VVDI Prog Benz EIS EZS Adapter Kit

Xhorse VVDI Prog EIS/EZS adapters for Mercedes-Benz finally in stock in vvdishop.com.

An New Set of 10 types EZS/EIS Adapters for your VVDI PROG programmer specially designed for quick out jobs, no Soldering Required what so ever, perfect for Beginners and out jobs Work Teams.

1, Don’t need to solder

2, Read data perfectly

3, Can be external power to light when working

4, Easy to operate, transparent material, better to observe.
Package including:

10pcs VVDI Prog EIS/EZS Adapter listing:

for W164(ST12),

for W169(ST12),

for W203(HC08),

for W209/211(ZWG),

for W209/211(HC12),

for W211(ST12),

for W215/220/230,