VVDI2 VAG Program Skoda Octavia 2015 MQB Keyless Go-OBD365.com

6/23/2018

VVDI2 VAG Program Skoda Octavia 2015 MQB Keyless Go

Here’s an example of programming a smart key in the car Skoda Octavia 2015 (MQB platform VAG) using Xhorse VVDI2 VAG key programmer.

Open VVDI2 VAG software

Select Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continental/VDO)

Click on Diag to load vehicle information

Instrument version 2210

Instrument type: MQB NEC35xx Continental VDO

Read EEPROM data and save

Switch on with working key before press ok

If car has keyless Go, put the working key nearby car coil and switch on

Choose Login Method 2, the car software for dashboard belong to 2210

Press Next to continue

1. The dashboard is dark when you see this tips. You need finish all operation before reset instrument.
2.Read EEPROM and save it.
3.Read IMMO data and save it.
4. Prepare a dealer key (You can go to step 7 if have working key aslo
don’t want to add key)
5. Reset instrument
6. Add key use immo data to learn the new dealer key to car
7. Finish other customer requests.

Save eeprom

Click on Read Immo data and then save it

Select Maker Dealer Key->Skoda

If prepare normal dealer key, follow instructions below:

Here we select Prepare OEM key

Prepare OEM key: need special key or OEM key. You must provide an original key ID to prepare OEM key. The OEM key can do online operation. OEM key can start engine directly for 4th immo system.
For 5th immo system need learn again.

Select key position 3

Press Next to continue

Input original working key to VVDI2 and press OK

Input OEM key to VVDI2 key programmer and continue.

Use “Reset instrument” to active instrument after all the operation is finished.

Click on Add key

Select Learn key, login with security code from immo data. Put the key into ignition switch on accord flowing tips. You must prepare all the working key.
Select key number to learn: 2
Press Next

Confirm car has keyless.