Will VVDI2 change Audi A3 8P 2005 BKC cluster?

Audi A3 8P 2005 BKC change cluster with VVDI2 OK? If not, how to do?

Question:

Audi A3 8P 2005 BKC, i want to change the cluster, but vvdi2 wouldn’t read the old IC.

Answer:

It’s 8P VDO dash with Fujitsu. VVDI does not support them. Read Immodata from ECU (CS, Login, MAC and immo id) get 7th byte from key and transfer to new dash.

Question:

Thanks your reply. I got all data what i need.
From ECU: CS 6 byte, PIN, MAC, VIN, ImmoID, powerclass
From keys: transponder ID and CS 7 byte
After transferred to the new dash, all ok on bench, no SAFE
Installed to the car, SAFE on dash.

I did a short video, no immo fault, strange

Answer:

If you disconnect ECU, does SAFE go away and you get mileage instead?
If so, I guess it is related to powerclass or MAC.

Upload your immoblock from dash and EDC16 eeprom dump or data.

ECU confdata and cluster immoblock here

ECU cluster:

https://mega.nz/#!FdJB0aRB!9xkkFJqrGDPlWalZxijPTkNny8b1fT6CPAeRt9M8jYo

Answer:

Your MAC is wrong:

971F1053 is correct one.
Status : 14000051FF is fine

Back to the car and test:

Finally, Works fine.

 

Credits to @exe123 and @ zolee33 from DK forum.

www.vvdishop.com

http://blog.vvdishop.com/audi-a3-8p-2005-bkc-change-cluster-with-vvdi2-ok/