Program Range Rover 2015 up Key with VVDI Prog VVDI2

How-to: add a new key to Land Rover Range Rover 2015 up using Xhorse VVDI Prog and VVDI2 key programmer.   It is also work with all key lost by the same way.

Main steps:

Read KVM  RFA data

Write Key

Rewrite data

Step 1: Read KVM Data

Remove the KVM module

Locate IC Chip RFA MC95S12XET265

In VVDI Prog software, select Land Rover->RFA Unsecured (MC95S12XET265)

Check connection diagram

Connect KVM module with vvdi-prog through MC9S12 adapter

Read D-Flash and save data

Read EEPROM and save data

Step 2: Write Key with VVDI2

In VVDI2 software, select Transponder Programmer

Select Euro->Rover->-Rover/Jaguar 2015-

Load RFA DFLASH and EEPROM data respectively

select a unused key position

Insert new key into VVDI2 programmer

Select Make Dealer Key

Prepare dealer key success.

Write the new dump file to RFA module with programmer

Check key status

Show key ID.  The key can start the car.

Step 3: Rewrite Data 

In VVDIProg software, open EEPROM and write new dump to RFA module

Open and upload DFLASH and write new dump to RFA module

Install RFA module to vehicle.

Test thew new key.

Done.

www.vvdishop.com

http://www.vvdishop.com/service/vvdi-prog-and-vvdi2-program-range-rover-2015-key.html