Xhorse VVDI Key Tool Max PRO Program FIAT 500 New Key

 Today I’m gonna show how to add a new smart key for 2009 FIAT500 first version with Xhorse VVDI Key Tool Max PRO by OBD.

 

Turn ignition on.

Connect VVDI Key Tool Max PRO to car OBD port.

 

Immo programming >> FIAT >> Select by area >> European area >> 500 >> Flip-key(2008-2017) >> IMMO system(DELPHI 93C86_ID46) >> Start programming >> Type 1(93C86) >> Display immo information(PIN, Key ID)

Here we can check the password: 27665

 

Press “Make dealer key”

Please put the key or blank 46 chip in the sensing coil of the Key Tool Max PRO and keep it still, because some non-original key position will be different.

Press OK.

Generating dealer key, please wait…

Generate dealer key successfully.

Press “Key programming”.

All keys that can start the vehicle must be programmed, keys that are not programmed will be scrapped(cannot be programmed again).

The new key to be programmed must be a dealer key!

Press Yes to continue.

 

Please enter a 5-digit security code: 27665

Here Key Tool Max PRO will automatically enter it.

 

Switch ignition on.

Current key number: 2

Insert the wanted programming key, switch ignition on.

Programmed successfully.

Press Yes to program next one.

 

Remove the current key, then insert the key to be matched and turn on ignition!

Programmed successfully.

Press No to continue.

 

Turn the ignition off.

Switch ignition on.

Key program function ends.

Current number of keys: 2

Please make sure whether the key function is normal!

 

Test the new keys, both can start the car and remote work OK.

Done.

www.vvdishop.com