Xhorse VVDI MLB Tool Program 2020 Audi Q8 Smart Key

 2020 Audi Q8 Add Key with Xhorse VVDI MLB Tool and VVDI2 successfully!

Calculate and generate key data with MLB Tool, then learn key with vvdi2.

You have to remove capacitors.

On xhorse need only desolder 2 x capcitors. Nothing big work. On KYDZ you also need desolder capacitors.

Both tools require capacitors to be removed, the “solder less” adapters are only for the three wires you connect at the end which is the easiest part of the process.

The key cover shell is sealed, better to change shell.

Photo attached:

How to Remove Xhorse XSKF30EN Smart Remote Key Shell?

 How to remove/disassemble the Xhorse XSKF30EN crystal knife style universal smart remote key shell?

Check the instructions below:

You will need this small key shell removal tool.

There is a small button on the back of the remote.

Press the button and pull the the part

There are 3 holes on the bottom.

Insert key removal tool into the smallest hole and pry upwards.

Then you can remove key shell.

www.vvdishop.com

https://www.vvdishop.com/service/disassemble-xhorse-xskf30en-smart-key.html

Xhorse Key Tool Max Pro Stuck on Firmware Update Page Solution

 Problem:

Brand new xhorse vvdi key tool max pro just going through the set up. Been stuck on this screen for 20 mins. Any suggestions?

Solution:

Network issue.

Get a faster internet connection or use WiFi hotspot.

Or turn it off, and downloaded again. It works out just fine.

 

 

User feedback:

Just had to turn it off and try again. It worked.