The XHORSE XDNPBGGL BMW BDC2 Adapter is designed for a secure and effortless connection to the BMW G chassis BDC module. Its 3 alignment pins ensure precise positioning, while the locking clips guarantee a stable fit. Follow this step-by-step guide for safe installation and removal.
Safe Connection Steps
- Precise Alignment
Align the 3 positioning pins on the adapter with the marked points on the BMW G chassis BDC module.
- Press & Lock
Once aligned, press the adapter downward firmly.
Engage the locking clips to secure the connection.
.jpg)
.jpg)
.jpg)
.jpg)
Easy Removal Steps
- Unlock the Clips
Release the locking clips on the adapter.
- Prepare the Module
Place the BMW BDC module on a clean, flat surface for stability.
- Even Pressure
Use both hands to press down evenly on both sides of the module.
The pin header will smoothly disconnect from the adapter.
- Lift Straight Up
Gently lift the adapter vertically to avoid bending pins.
.jpg)
.jpg)
.jpg)
Why Choose the XHORSE BMW BDC2 Adapter?
No Force Needed – 3 alignment pins prevent bending and damage. Secure Locking – Clips ensure a stable connection. Safe Removal – Even pressure prevents injury or module damage.
Supported BMW Models
| Series | Model | Year Range |
| 5 Series | G30 | 2016.11 – 2020.06 |
| 5 Series | G31 | 2017.03 – 2020.06 |
| 5 Series | G38 | 2017.05 – 2020.08 |
| 6 Series | G32 | 2017.07 – 2020.06 |
| 7 Series | G11/G12 | 2015.07 – 2019.02 |
| X3 | F97 | 2019.04 – 2021.07 |
| X3/IX3 | G08 | 2018.05 – 2021.08 |
| X3 | G01 | 2017.12 – 2021.07 |
| X4 | G02 | 2018.04 – 2021.07 |
| X4 | F98 | 2019.04 – 2021.07 |
| M5 | F90 | 2017.11 – 2020.06 |
*Works with KEY TOOL PLUS, KEY TOOL MIDI or VVDI2. required to activate BMW-G BDC2 function.
Don’t Miss Out – Pre-Order the XHORSE BMW-G BDC2 Adapter!
Upgrade your BMW diagnostics and key programming with this essential tool. Reserve yours today and take your workshop to the next level.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.