Xhorse VVDI Prog V5.0.2 Software Update in April 2021

 Xhorse VVDI Prog software released a new update V5.0.2 on April 30th, 2021.

 

VVDI-Prog v5.0.2             (2021-04-30)
* This version DON’t need update
firmware
+ Add D160XX(ST),
D80XX(ST)
M35080XX(ST),
M35160XX(ST)
options in
<1-EEPROM&FLASH>-><SPECIAL-FUNCTION>
+ Add R5F10A/10B_Data_4KB_Write,
R5F10AxAx_Flash_16KB_Write,
R5F10A/10BxCx_Flash_32KB_Write,
R5F10A/10BxDx_Flash_48KB_Write,
R5F10A/10BxEx_Flash_64KB_Write,
R5F10A/10BxFx_Flash_96KB_Write,
R5F10A/10BxGx_Flash_128KB_Write,
options in
<2-MCU>-><RENESAS-RL78-F13>
+ Add R5F11B_Data_4KB_Write,
R5F11BxCx_Flash_32KB_Write,
R5F11BxEx_Flash_64KB_Write,
options in
<2-MCU>-><RENESAS-RL78-G1F>
+ Add R5F11Z_Data_2KB_Write,
R5F11ZxAx_Flash_16KB_Write,
options in
<2-MCU>-><RENESAS-RL78-G1P>
+ Add STM32F103xC,
STM32F103xE,
STM32F105x8,
STM32F105xB,
STM32F105xC,
options in
<2-MCU>-><ST-STM32>
+ Add Mitsubishi-Eclipse
Cross-BCM(D70F3380) option in
<4-IMMOBILIZER>-><Mitsubishi>
+ Add CEM-V40-2014(SPC560B60L7)
options in
<4-IMMOBILIZER>-><VOLVO>
+ Add CEM1(R5F64524)
options in
<4-IMMOBILIZER>-><VOLVO>
+ Add SRS(MC9S12DG128-UNSECURED)
options in
<7-AIRBAG>-><Hyundai>
+ Add ELANTRA-INDOOR-DISASTER-BOX(–17)
options in
<8-OTHER>-><Hyundai>

VVDIprog V5.0.2 Download link:
https://we.tl/t-u5x8Id3P07
The link is valid for seven days.

Xhorse VVDI2 VW Skoda Cluster Bench Pinout

 Problem:

I have s Skoda supreb 2012 which has one working smart key (orignal key MEGAMOS ID48), car push start button. Customer need another key so i program xhorse vvdi smart key with vvdi2 vag but end process in cluster dispalys 0-2.  0-2 mean no key learned still in programming mode. Key not program with near push start & original key only remote work, not ignition & not start.  I have saved original immo data from vvdi.

Than i remove odo & read nec24c64 eeprom & autel do automatic service mode & then write eeprom via obd & make cs, pin , mac. but end of same key not program.

 

Solution

Read 24c64 direct in PCB in a programer.
Put dump in service mode in vvdi2 and write back in the eeprom in programer.
it vvdi2 read the eeprom and then write the original eeprom previously read it the programer.
read the immo data and them write the backup you have of the immo data.

Need to learn 2 keys.
Original and new key.
You put key quantity 2
Reset instrument cluster
If it works this will allow you to restore the cluster to its original state!
You need original brand new keys or xhorse proximity key to the this job.
If vvdi prepare new dealer key them you have to add both key original and new using immo data option.

Connect the cluster on the bench with vvdi2 and do the steps above.
vvdi 2 allow direct connection to the cluster, only need connect power and ground to the cluster and CAN  lines.

And here is another wiring pinout

Credit to Mr. danyguit and cristo who provide pinouts above.

 

Test feedback:

Do the procedure above and car start with the original key. below attach picture

i try xhorse smart key & make dealer key & info with vvdi 2 = MEGAMOS 48 [ LOCKED] . I read orignla key detail = MEGAMOS 48 = TP24 [ SKODA ]
but when i make dealer key some error
the new key id checksum error , this key cat be learn to car
below attach pictures of error photo
then i learn key one original learn ok 1/2 , second new one fail & again car off
again do all make service mode & back immo data & again car start with original key

Then i made vvdi super chip transpoder memamos 48 tp-24.
than lean key one original & one only transponder, all 2/2 success & original remote also work.

But second key only transpoder no remote.

vvdi2 proximity remote may support but my vvdi2 serial number has Chinese database so today change to EU database and try

Solved!!!

Finally i change my sn to global database & make proximity remote & write. All success.

http://blog.vvdishop.com/solved-vvdi2-skoda-superb-2012-24c64-no-key-found/

Xhorse Mini Prog Key Tool Max Program 2013 VW CC Key

 How to use Xhorse Mini Prog + VVDI Key Tool Max to program a dealer key M95320 for 2013 Volkswagen Passat CC? Today I’ll demonstrate it on bench.

 

Read & Save EEPROM

Remove the outer shell to take out chip.

Hold and push Mini Prog straight down on the M95320 chip.

Press on Key Tool Max meanwhile,

EEPROM and FLASH >> ST >> M95XXX >> M95320(pressure) >> Read >> EEPROM >> Start operation >> Continue >> Rename, OK

 

(Note: DO NOT lay down Mini Prog during reading.)

 

Read & save EEPROM file successfully.

The Mini Prog screen will show an OK button, which means “Done”.

 

Program Dealer Key

Switch to Xhorse Key Tool Max function page, press

Special function >> Immo data tool >> Europe >> VW >> Passat >> Comfort ID48 – 95320 >> Start execution >> Load EEPROM file

 

Select an unused key position: key 4, press “Prepare dealer key”.

 

Select “Megamos 48”.

Place a new key into Key Tool Max coil.

OK >> OK

 

Prepare dealer key success.

It can start engine after write back new dump file.

Press “OK” to save the new dump file.

Rename, save >> OK

Let’s go back to Xhorse Mini Prog page to write new dump file.

EEPROM and FLASH >> ST >> M95XXX >> M95320(pressure) >> Write >> EEPROM >> Start operation >> Select dump file to load

 

Turn on Mini Prog and hold it straight on M95320 chip again.

Start operation >> Continue

(Note: DO NOT lay down Mini Prog during writing.)

 

Write completely.

Key programming has done!

 

Program 2013 VW Passat CC a M95320 key with Xhorse Key Tool Max & VVDI Mini Prog was successful!

https://www.vvdishop.com/

Which Xhorse Tools Free Language Limitation?

 Good news! Some Xhorse tools support free update multi-language. That means no more need to get the language authority from dealer. It is free with the last update.

What Xhorse devices free language limitation now?

VVDI Key Tool

VVDI Mini Key Tool

VVDI Key Tool Max

VVDI Mini OBD Tool

Dolphin XP005

Condor XC-Mini Plus

 

Mini Key Tool, Key Tool Max, Dolphin XP-005 app language: 

English, German, Spanish, Persian, French, Hebrew, Hindi, Indonesian, Italian, Korean, Polish, Portuguese, Russian, Thai, Turkish, Ukrainian, Vietnamese

Condor Mini/Mini Plus language:

Portuguese Spanish French German Czech Arabic Turkish Dutch Polish Bulgarian Norwegian Slovak Italian English Russian Chinese

 

Provide device serial number to change language you desired.

 

What Xhorse devices are still language limited?(until 23th, Apr.)

VVDI Key Tool Plus Pad

Xhorse Mini Prog

Panda key cutting machine

 

Any questions welcome to contact us.

https://www.vvdishop.com/

Xhorse Mini Prog Read Renault Duster 95040

 How to use Xhorse VVDI Mini Prog & Key Tool Max to read Renault Duster BCM IC95040 eeprom? As below I’ll show step by step.

 

Tools

A Renault Duster BCM IC95040 module

A VVDI Mini Prog

A VVDI Key Tool Max

Connect Mini Prog with Key Tool Max via Bluetooth firstly.

 

Remove BCM IC95040 outer shell, hold & push Mini Prog down straight on chip to read;

Press on Key Tool Max,

EEPROM and FLASH >> ST >> M95XX >> M95040(pressure) >> Read >> Eeprom >> Start operation

 

It is loading on the Mini Prog screen meanwhile, wait until 100%…

 

Rename and press “OK” to save data file.

Read EEPROM successfully.

Now you can use it with VVDI Super Chip to program transponder.

 

Using VVDI Mini Prog + Key Tool Max programmer to read EEPROM is quite easy & efficient.

https://www.vvdishop.com/

https://www.vvdishop.com/service/xhorse-mini-prog-read-renault-duster-bcm-95040.html

Xhorse Toyota XM Smart Key FAQ

 Xhorse XM series Toyota smart key XSTO00EN is now pre-order, will soon be available in a month or two.  Here vvdishop.com collects some frequently asked questions and answers of the smart key.

 

Q: Is it for Toyota only? what about Lexus?

A: It is for both Toyota and Lexus.

 

Q: it has programmable ID?

A: Yes can change ID and frequency as you like.

 

Q: is XM key the old or new remote?

A: depends on the PCB code , check the xhorse App , all list is supported we tried on 2010-2013-2016-2018.

 

Q: There are only 315 frequency?

A: It has 312MHz 315MHz 314MHz 433MHz optional frequencies.

 

Q: How much is the XM smart key?

A: Per smart key PCB takes US$51.99 free shipping.

 

Q: Do regular universal prox not work with the Toyota prox systems?

A: No, you need special ones. There is a list using the XM smart key.

 

Q: only mentioned xhorse key tool but no mentions of vvdi2 and mini key tool.  Can i use the XM key with vvdi2 and mini keytool?

A:  The Toyota XM smart key can be used with xhorse vvdi2, key tool max, mini key tool and vvdi key tool plus pad.

Our engineer tested it with VVDI2,  2010-2015-2018 all working and proxy antenna is very good

Q: i have both mini key tool and vvdi2, the vvdi2 is for the transponder and the mini key tool is for the remote side of it?

A: mini keytool just to renew it and change frequency , generation is accurate and good via vvdi2.

 

Q: XSTO00CH TOY Toyota 8A Smart Key can be used on  toyota prius 2007-2014?

A: No, it cannot.

 

Q: Is there a car list of the Xhorse XM smart key?

A: Support version: 0020, 0010, 2110, 0182, 3330 etc

Supported Models:

Camry (08-17)
Alphard (-12)
GS400 (13-17)
CT200 (2015)
RAV4 (08-19)
Sienna (05-15)
GS430 (13-17)
NX200 (2016-)
Corolla (08-18)
Previa (07-)
IS200 (13-17)
RX450 (15-)
Levin (-18)
Wish (2018)
IS300 (13-17)
BRZ(-14)
Land Cruiser (08-20)
E’Z (-15)
ES330 (13-17)
Toyota86(12-14)
High lander (09-19)
Vios (08–13)
RX270 (14)
Crown (10-17)
GS3300 (13-17)
CX460 (2010)
REIZ (08-12)
ES300 (13-17)
Land cruiser Prado (08-20)

You can download xhorse app and check Toyota remote list,  the XM smart key can be used if there is red PROX icon.

Q: Does it require points to generate?

A:  You will need 200 points for the first-time generation. To get free points you need to generate VVDI universal remotes. Rewrite does not require points.

 

 

Q: Supports rewrite?

A: Yes, it can be renewed and rewrite.

 

Q: Can it also work for Lexus LX570 year 2014?

A:  No, it cannot.

 

Q: Does it come with key shell?

A: No, only key PCB.

http://blog.vvdishop.com/faq-xhorse-toyota-xm-smart-proximity-key-pcb/