Xhorse VVDI Prog Failed to Read Land Rover RFA V510 SPC560B60L3

 Problem:

I’m trying read a Land Rover RFA V510 SPC560B60L3 with xhorse vvdi prog and all I’m getting is files full of FFF. It would be great if someone could tell me where I’m going wrong.

Solution:

New RFA with SPC560B60L3 is OTP , you can’t read it.

This MCU is locked and cannot be read or write.

‘If the contents of the shadow flash memory are erased and the NVSCC0,1 registers are not re-programmed to a valid value, the microcontroller will be permanently censored with no way for you to regain access. A microcontroller in this state cannot be debugged or reflashed. In case that the device is censored, the user has to put the right password (NVPWD0-1) in to the buffer for further operation with the device.’

Xhorse Adds Porsche 12V Lithium Battery Repair Function

 Xhorse released a new function-Porsche Cayenne 12V Lithium Battery Issue Repair.

 

Support Porsche models produced from 2018 to 2020

Can be applied to

VVDI Prog
software version 5.1.2

+ Add CAYENNE AC MOUDLE, LITHIUM BATTERY MODULE options in <8-OTHER>-><PORSCHE>

Xhorse Key Tool Plus

database V55

Mini Prog

database V49

Data and detailed diagrams are well prepared in the built-in database.

Main steps:
Remove lithium battery module
Locate IC chip- SPC5644B.
connect vvdi prog with battery module follow by the wiring diagram
Read Pflash and Dflash.
Save data.
Write data.
Xhorse VVDI contains data for 2018-2020 Cayenne to write back.

 

Porsche Lithium battery module SPC5644B Mask ON32E wiring diagram

 

Xhorse XDPGSOGL Connect Vvdi Prog & Solder-Free Adapters

 Good news! Xhorse XDPGSOGL Connector Cable is arrival in stock. It’s a conversion plug to establish the connection between VVDI PROG & Xhorse solder-free adapters.

Supported Adapters List:

BMW XNDP11 CAS3/CAS3 adapter
BMW XNDP12 CSA4/CAS4+ adapter
BMW E series FRM adapter
DB9 Benz EIS XNDP13 adapter
DB15-DB25 BMW EWS4 adapter
DB15-PS2 Remote Renew adapter
Land Rover KVM XDNP16 adapter
Honda Civic XDNP54 adapter
Honda XDNP57 Vezel adapter
Honda Fit-H XDNP19 adapter
Honda Fit-L XDNP20 adapter

Porsche BCM XDNP17 adapter
Hyundai Sonata XDNP21 adapter
Kia K3 XDNP25 MB91F adapter
Kia K5 XDNP26 MB91F adapter
Volvo KVM XDNP27 adapter
Volvo CEM XDNP28 adapter 1
Volvo CEM XDNP29adapter 2
Delphi 48 Immo adapter
Audi J518 XDNP45 adapter
Audi BCM2 solder free adapter

(Partially unsupported at present, please refer to the list above)

 

Not like before, the Xhorse solder-free adapters are allowed to work with VVDI PROG from now on. Rather than simply apply to MINI PROG & VVDI Key Tool Plus. DB15 DB25 adapter can greatly improve the efficiency of operations. To be more convenient, safer & stable than soldering wires.

 

5 reasons why you should have solder free adapters

http://blog.vvdishop.com/5-reasons-to-have-xhorse-solder-free-adapters/

 

For more details, welcome to contact us.

www.vvdishop.com

Xhorse VVDI Prog V5.1.2 Update Feature

 Xhorse VVDI Prog programmer software was released to V5.1.2 on Feb, 24th, 2022.

v5.1.2 (2022-02-24)

* This version DON’t need update firmware
+ Add AVANCIER(R7F701033)(ADAPTER), BREEZE(R7F701033)(ADAPTER),
CIVIC(R7F701033)(ADAPTER), CRV(R7F701033)(ADAPTER),
VEZEL(D70F3634)(ADAPTER), XRV(D70F3634)(ADAPTER) options in <4-IMMOBILIZER>-><HONDA>
+ Add FOTON KANGRUI-H2 option in <5-DASHBOARD>-><FOTON>
+ Add MAXUS-G10 option in <5-DASHBOARD>-><SAICMOTOR>
+ Add AIRBAG E53 MRSZ4/16 option in <7-AIRBAG>-><BMW>
+ Add RANGE-ROVER-SEAT-MOUDLE option in <8-OTHER>-><LandRover>
+ Add GAYENNE AC MOUDLE, LITHIUM BATTERY MODULEoptions in <8-OTHER>-><PORSCHE>

 
Free Download VVDI Prog V5.1.2

Tips to Write Chrysler Crossfire 1D69J Key with VVDI2

Xhorse vvdi2 can’t generate Chrysler crossfire transponder. Show me unknown file. I read the Motorola 1D69J by vvdi prog.

Solution:

CHRYSLER crossfire has the same immo box as Mercedes SLK.  vvdiprog reads it without problems with its hc08 adapter. You can read with other progammers, orange5 with HC705 adapter, carprog, iprog etc.  VVDI2 won’t write this transponder, you will need other devices.

Optional solutions:

• Load dump on abrites on ML mercedes
• Tango does them but you need Pcf7930 chip as pcf7935 doesn’t work.

• KR55 will generate working remote. Well worth the money.  You can read by carprog using adapter kr55 without desolder mcu. open the file at kr55 or tango and make keys. The procedure lasts less than 10 min
• Or send the file to someone who can make you a key.

 

Final feedback:

I generated transponder super chip xt27 xhorse by tango and car run.

Top 5 Reasons to Get Xhorse Solder Free Adapters

 There are several ways for locksmiths to get IMMO data on market now: by soldering, by adapters or pay for third-party service. Soldering is inevitably troublesome while the third-party service is always expensive. In contrast, Xhorse Solder Free Adapters will be a cost-efficient way.

 

Reason 1

• Audi BCM2 Solder Free Adapter is more economical & safe.

1. Supports get BCM2 data for A4L, A5, Q5, A6L, A7, A8 to do key adding & all key lost. It’s only $130 to solve data encryption issue, cheaper than paid calculation service, normally $500.

 

2. Avoid extra cost from the risk of data loss.

Let’s calculate the situation in case you have lost data without backup. You’ll need to order a new BCM module($500) plus an AUDI original key($580). And that’s not even adding any labor costs. The whole process may even take 1 month for waiting or even longer.

 

FAQ Xhorse VVDI Audi BCM2 Solder Free Adapter

http://blog.vvdishop.com/faq-xhorse-vvdi-audi-bcm2-solder-free-adapter/

 

Reason 2

• Volvo KVM CEM Solder Free Adapter is safer than soldering.

Read Volvo KVM/ CEM data by soldering is generally complicated, which is only recommended for experienced locksmiths. Even so, the slightest mistake can easily cause damage. Xhorse solder-free is able to avoid the loss of misoperation.

 

Reason 3

• BMW CAS4/CAS4+ XDNP12GL Adapter is more efficient to save time.

Xhorse Solder Free Adapters package include the CAS4/CAS4+ adapter, which is extensive use for locksmiths. No soldering + simple way. While improving efficiency, it also means saving time and cost.

 

Reason 4

• Land Rover XDNP16 KVM Solder Free Adapter can avoid loss from partitionning errors.

Although some devices(eg. VVDI Key Tool Plus) support to program Land Rover all keys lost via OBD, it’s more recommended to use KVM Solder Free Adapter in case communication failed.

 

On the other side, crystal oscillator or components of the KVM module are vulnerable to damage by soldering. With the solder free adapter, the problem is no longer a concern.

 

Reason 5

• Porsche XDNP17 Solder Free Adapter is easier to crack successfully.

Soldering wires to get immo data is always difficult for Porsche. Besides, it’s also easy to crack failure. Once the partition error was prompted, which means you may meet a huge loss. That’s the why the solder free adapter came out to help locksmiths avoid potential risk.

 

To sum up, it’s very useful to have Xhorse Solder-free Adapters in daily work. Buy the complete set of adapters will be a good investment for locksmiths.

 https://www.vvdishop.com/service/vvdi-key-tool-plus-full-solder-free-adapters-list.html

VVDI2 Program Mini Cooper 2012 CAS3++ ISTAP AKL by OBD

 2012 model year mini cooper cas3++(istap) all key lost is done by xhorse vvdi2 bmw using 64 attempts method via obd2. Get key info – update cas Flash 10 minutes – save key info.

Car model: Mini Cooper 2012
CAS Type: CAS3++ ISTAP
Remote frequency: 315MHZ
Status: all keys lost

 

Procedure:
Update CAS flash
Read key info
Prepare key success
Make dealer key success

 

For cas3 istap , it can do by obd2 for some part number of CAS , you can see list on instructions PDF of vvdi2, out of list if you do by obd2 it will fail if you have best tools you can fix it by obd2 too (HEXTAG, AUTEL, VVDI2 etc).

Cas id Versions starting with 92 are obd2. Versions starting with 93 are bench.

 Done BMW 528I 2008, 2009 model year bmw x5 cas3++(istap) akl via OBD as well.

Always make a backup first and have a battery maintainer under the charger. Otherwise will brick car.

The safest way is done on bench.

Always on istap remove CAS and read eeprom and Flash to be save, then with eeprom dump write key on vvdi2. On all keys lost you will need ISN from ECU that many tools can read on bench . Spare key you can get ISN from working key. (You don’t need flash from CAS , but while you read eeprom, you might as well read flash and save save save always. Bench always safer than obd because you can backup and save your data.

CAS 1, 2 and 3 obd save.

CAS 3 istap always on bench.

See also:

VVDI Key Tool Plus Pad Program BMW CAS3++ ISTAP All Keys Lost via OBD

Write Toyota Aygo 2008 Key with VVDI2 & VVDI Prog

 First attempt:

Reading Toyota Aygo 2008 24c04 eeprom with xhorse vvdi prog. Numbers on box 89780-OHO11. Trying to make chip with vvdi2 but saying ‘This file is not supported by current model’.

Tried with Zed full use file from vvdiprog bust says file to big.

Im508 read chip but can’t find agyo on chip write via dump.

Abrites no joy.

Tmpro no joy.

Im508, Xtoolpad 2, Vvdi prog All read file the same.

Second attempt: Success!!

It was caused by bad reading. Took off board and got a better read.

vvdi-prog works fine
Vvdi 2 and xhorse super chip
No need to write back if you generate a used slot.
Chip will start vehicle.

Transfer Files from Xhorse Key Tool Max to PC

 Xhorse VVDI Key Tool Max is supported to transfer files to PC via USB. Generally, all files are acquiescently saved in the internal memory path: Xhorse/share/Mini_prog/year/memory type. Example may as below:

1. Xhorse/share/Mini_prog/2022/AT24C64C(pressure) eeprom

 

But this path is not available from Windows file manager.

 

4 steps to move Xhorse Key Tool Max files to PC

1. Hold on HOME button on VVDI Key Tool Max for 10-15s to get access to system settings;

 

2. Open file manager and create your own folder in root drive;

 

3. Go to folder Xhorse/share/miniprog, mark file you want to copy(press and hold);
4. Go back to root drive and paste the file in your own folder;

Now your file is in folder, you can easy access from Windows.

www.vvdishop.com