6/28/2022

How to Fix VVDI Prog JLR IMC Renesas V850 Device Error?

 Xhorse vvdi prog failed to read Land Rover and Jaguar Infotainment Master Controller IMC Headunit main board MCU chip Renesas V850 D70F3552 mcu, it gives a device error and all FF FF. Any idea?

VDI Prog JLR IMC Renesas V850 Device Error 1

VDI Prog JLR IMC Renesas V850 Device Error 2

VDI Prog JLR IMC Renesas V850 Device Error 3

It is encrypted. VVDIProg will not read it.

Xhorse VVDI Prog Read GOLF 7 SPC560P50L3 Airbag

 How to read and fix internal error with a VW GOLF 7 USA SPC560P50L3 5Q0959655J airbag SRS module by using xhorse vvdi prog programmer.

To repair/clone you need read and write cFlash and dFlash

 

GOLF 7 SPC560P50L3 airbag wiring connection

Xhorse VVDI Prog Read GOLF 7 SPC560P50L3 Airbag  1

Xhorse VVDI Prog Read GOLF 7 SPC560P50L3 Airbag  2

Run vvdi prog software

Select MCU SPC560XXX- SPC560P50L3

Xhorse VVDI Prog Read GOLF 7 SPC560P50L3 Airbag  3

Read Dflash

Xhorse VVDI Prog Read GOLF 7 SPC560P50L3 Airbag  4

Read cFlash

Xhorse VVDI Prog Read GOLF 7 SPC560P50L3 Airbag  5

Xhorse VVDI Prog Read GOLF 7 SPC560P50L3 Airbag 6

Save data. no need test data.

6/23/2022

How Generate ID63 80 Bits Ford with Xhorse Mini Key Tool?

 Question: How to generate id63 80bits for ford with xhorse vvdi key tool plus?

Generate ID63 80 Bits Ford with Xhorse  1

Solution:
Use ID63 40bit, 83 won’t work.  All these claims need 63 80bit, it is because the chip, not only vvdi super chip, but most of them out there, including if you buy a ford aftermarket key, they all have the ability of being a 63(40bit) or 83(80bit), meaning you can convert them using vvdi mini key tool. So it really down to what the car is, if it is a car that need 63 then use the 63 (40bit), if the car need 83 then use 83 (80bit), check ilco auto blank book for reference if you are not sure, or try one of it don’t work, then use mini key tool to convert it to the other then try.
Generate ID63 80 Bits Ford with Xhorse  2
Generate ID63 80 Bits Ford with Xhorse  3
If you have issues generating it just keep an OEM ford key and clone it works every time.

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage

 Here with this tool it works- Xhorse Iscancar VAG MM-007. Swap cluster (adjust the odometer) on VW Tiguan 2.0TSI 4motion DSG7 3D cluster 1104 successfully.

 

Change KM with VAG MM-007

Original Odometer: 14625km

Desired Odometer: 10000km

 

How-to:

Connect VAG MM-007 with vehicle and turn on the scanner

 

Go to Main menu-> Special Function- > KM Calibration- > Dashboard->choose cluster type NEC+24C64 (2014.06- VW Skoda Seat)- >Tiguan 2014

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage  1

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage 2

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage 3

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage 4

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage 5

Xhorse VAG MM-007 will detect original mileage. It is very similar to the original KM

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage 6

Input new km you desired and press OK

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage 7
Choose login method 1
The instrument cluster turns black, it is normal. It will be reset when correct mileage is completed.

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage 8
Write new KM successfully.

Xhorse VAG MM-007 Change VW Tiguan 24C64 Mileage 9

Enjoy.

6/21/2022

Xhorse VVDI Prog V5.1.7 Adds More EDC17 ME17 ECUs

Xhorse VVDI Prog programmer software update to V5.1.7 on June 21th, 2022.

 

VVDI Prog v5.1.7 (2022-06-21)

* This version DON’t need update

* Fixed some ECU options reading exceptions
* Fixed bug about AT25320 option in <1-EEPROM&FLASH>-><ATMEL>
+ Add M29F400FBXXMXX option in <1-EEPROM&FLASH>-><ST>
+ Add EDC17C08(ADAPTER), EDC17C53(ADAPTER), ME17.9.11(ADAPTER) options in <10-BOSCH_ECU_ADAPTER>-><Hyundai>
+ Add EDC17C55 option in <10-BOSCH ECU ADAPTER>-><JMC>
+ Add EDC17C63(ADAPTER) option in <10-BOSCH_ECU_ADAPTER>-> <MAHINDRA>
+ Add ME17.9.23(ADAPTER) option in <10-BOSCH_ECU_ADAPTER>-> <Renault>
+ Add ME17.9.61(ADAPTER), ME17.9.64(ADAPTER) options in <10-BOSCH_ECU_ADAPTER>-> <Suzuki>

 

Free Download Xhorse VVDIProg V5.1.7

https://mega.nz/file/BN8lQSIZ#kJ1H0c8huMsHa8F1TScJvXa37I2qx5-VJtSAv21Ws98/url


Hyundai EDC17C08 TC1766 wiring diagram Version 1 & Version 2

vvdi prog Hyundai EDC17C08 TC1766 wiring diagram

Hyundai ME17.9.11 TC1766 wiring diagram

Hyundai ME17.9.11 TC1766 wiring diagram

JMC EDC17C55 TC1767 pinout

vvdi prog JMC EDC17C55 TC1767 pinout 1

JMC Mahindra EDC17C55/EDC17C63 wiring diagram

vvdi prog JMC Mahindra EDC17C55/EDC17C63 wiring diagram

Hyundai EDC17C53 TC1767 wiring diagram

vvdi prog Hyundai EDC17C53 TC1767 wiring diagram

Renault ME17.9.23 TC1724

VVDI Prog Renault ME17.9.23 TC1724

Suzuki ME17.9.61 TC1724

vvdi prog Suzuki ME17.9.61 TC1724

6/20/2022

Xhorse VVDI2 Program 2000 VW Beetle ID48 Key via OBD

 These old beetles can be a real pain to do. This is a 2000 VW Beetle, Xhorse VVDI2 VAG read EEPROM via OBDII, clone out key to VVDI super chip XT27. The procedure is the same to 1998 to 2007 VW Beetle with Megamos 48 transponder.

Xhorse VVDI2 Program 2000 VW Beetle ID48 Key 1

Go to Special Function K-line Instrument/Immo Box, Read EEPROM via OBD

Xhorse VVDI2 Program 2000 VW Beetle ID48 Key 2

Xhorse VVDI2 Program 2000 VW Beetle ID48 Key 3

Go to Immobilizer data tool,  make dealer key by eeprom

Xhorse VVDI2 Program 2000 VW Beetle ID48 Key 4

Xhorse VVDI2 Program 2000 VW Beetle ID48 Key 5

www.vvdishop.com

6/16/2022

Xhorse BMW 46 Transponder 7953 Key Not Working?

 Question: why xhorse vvdi mini key tool doesn’t my clone work?  bmw x1 2012 46 Transponder PCF7953.

cloning was possible. but the key does not work.

Xhorse BMW 46 Transponder 7953 Key Not Working

Solution:

It is rolling code impossible to clone. Don’t clone it, program a new one.

Can’t clone BMW chips, can only be done by programming.
Read CAS and use vvdi super chipvvdi2 will make a key file 10min easy job.

6/15/2022

Program 2013 Nissan Sentra All Key Lost with Xhorse Mini OBD

 2013 Nissan Sentra All Key Lost Situation. Can I use an OEM used (locked) smart key fob I have or must be unlocked before programming? I also have an Xhorse Smart Key and use Xhorse Key Tool Max and Mini OBD Programmer. Thanks for your help or recommendations!

Program 2013 Nissan Sentra All Key Lost with Xhorse Mini OBD

Solution:

Sentra don’t give problems but check module serial, just in case. Don’t want to burn it by reading pincode obd.

Most of them are unlocked.  You can always use xhorse remote to program in first. And then see if you can add the used remote in.

You can use even if is locked! keytool max have an option to renew nissan key. you can also buy the renew adapter.


UPDATE:

programing was successful. Mini OBD read BCM code 5 digit, PIN code 4 digit, unlock steering column,  matching key less than 5 min.

Xhorse New 8A AKL Adapter for 4A 8A Page4 Bypass PIN

 Xhorse VVDI Key Tool Plus last update can do Toyota smart key all keys lost using XM remote as emulator. The function requires the new 8A AKL adapter kit as well.

Adds 8A 2016- P4 A8/A9/AA

Adds 4A 2019-

xhorse vvdi 8a adapter kit 1

Xhorse VVDI new 8A AKL Adapter Kit

No need PIN code
support all keys lost and add key

Toyota Transponder 4A
Corolla 2017-
Levin 2019-
Allion 2021-

Toyota Transponder 8A with Page 4: A8/A9/AA
Avalon 2019- 0410
Crown 2018- 2110
RAV4 2019.7- 0410
Wildlander 2019- 0410
Alphard 2018- 0120
Camry 2018- 0410
C-HR 2018- 0410
Izoa 2018- 0410
Vellfire 2017- 0120
Highlander 2017- 2110
Prado 2018- 3330
Land Cruiser 2017- 2110/F43D
Prius 2018- 0410

Lexus Transponder 8A with Page 4: A8/A9/AA
ES 2018- 0440
GS 2018- 0440
IS 2017-2020
LS 2017- 0440
LX 2017- 0010/F43D
NX 2017- 2110/F43O
UX 2018- 0440

4A 8A Page4 xhorse new 8a adapter

6/13/2022

Can Xhorse Key Tool Clone Renault 4A Transponder?

 Question:

 I’m new to this, I got a Renault Logan (4A transponder PCF7952E) and I wanted to clone, and xhorse vvdi mini key tool won’t let me clone, is there a way to clone?

Can Xhorse Key Tool Clone Renault 4A Transponder

Answer:

This transponder is not clonable.
Only with original 4A chip and showing up by obd. The chip is not cloneable, it can only be programmed via OBD and with 4A chip.
You cannot clone it and the ONLY solution is to program with key programmer using an original chip.
You can make a key via obd2 or read the EEPROM and make a key from it by immo data tool.

6/08/2022

Xhorse VVDI Prog V5.1.6 Adds CY15B016Q CY15B064Q

  Xhorse VVDI Prog programmer software released to V5.1.6 on June 8th, 2022.

 

VVDIprog v5.1.6 (2022-06-08)
* Fixed B48 and B58 options bug in
<10-BOSCH_ECU_ADAPTER>-><BMW>
+ Add CY15B016Q,
CY15B064Q,
CY15B128Q options in
<1-EEPROM&FLASH>-><CYPRESS>
+ Add GT30L24M1W,
GT31L16M1Y80,
GT31L24M1W,
GT32L24F02,
GT32L24M01,
GT32L32M0 options in
<1-EEPROM&FLASH>-><GENITOP>
+ Add PCT25VF010A,
PCT25VF016B,
PCT25VF020B,
PCT25VF032B,
PCT25VF040B,
PCT25VF064C,
PCT25VF080B,
PCT25VF512A,
PCT26VF016,
PCT26VF032,
PCT26WF032 options in
<1-EEPROM&FLASH>-><PCT>
+ Add SST26VF016B,
SST26VF032B options in
<1-EEPROM&FLASH>-><SST>
+ Add X5043,
X5045,
X5323,
X5325,
X84041,
X84161,
X84641 options in
<1-EEPROM&FLASH>-><XICOR>

Free Download Xhorse vvdi prog v5.1.6
https://mega.nz/file/UQlgWaTR#H90o9RbES0wIC6KOnqnDFSJeTgFesK_Eq_Ibz1LaQQk

6/06/2022

Xhorse Remote Cloud Recognition Not Support?

 Question:

I try to recognize the remote under the Remote cloud recognition function. xhorse vvdi mini key tool failed me and threw an error ‘retry to collect or not support this remote’

Xhorse Remote Cloud Recognition Not Support

Solution:

Remote cloud recognition does not recognize all remotes.

Your remote can not be recognized.

Check: How to use Xhorse Remote Cloud Recognition Function?

6/02/2022

Will Xhorse Mini Key Tool Clone Hyundai 4D70?

 Problem:

I was trying to program a key for a Hyundai Grand i10 2021.

xhorse vvdi mini key tool doesn’t clone it (4D70), try with key tool max and the same result.  Failed to calculate data.

Will Xhorse Mini Key Tool Clone Hyundai 4D70 1

Will Xhorse Mini Key Tool Clone Hyundai 4D70 2

Solution:

You must generate the chip and program it obd you can’t clone it.

if it 4d60 it can be cloned.

If it is 4D70, it cannot.

www.vvdishop.com