How to Modify VVDI MLB Tool for MQB48 Adapter?

 Xhorse VVDI MLB Tool updated MQB48 NEC35XX immo data collection function recently. Follow the steps below to update your VVDI MLB Tool firmware to use MQB48 adapter.

 

The MQB48 adapter comes with solder wires and an enhanced version replacement chip.

Remove 4 screws on the back of the MLB tool and open the shell.

Remove 2 screws on the main board and check out the other side.

This is the front of the main board.

Replace this chip using the enhanced replacement chip in the package.

After replacing the chip, reinstall the VVDI MLB Tool.

Then you can use the MQB48 adapter to collect immo data.

NOTE: Both the device and the adapter need to be connected to a power supply !!!

VVDI Key Tool Max Pro Program Ford Ranger 2022 All Keys Lost

 Xhorse VVDI Key Tool Max Pro new user feedback:

FORD Ranger 2022 All Key lost is Ok.
It is much faster than Autel.

Enter from Ford Ranger year 2015 to 2022 menu.

Which Emergency Blade fits in Xhorse XM38 Toyota?

 As titled,  which emergency blade fits in Xhorse Toyota xm38 smart key?

Toy40, but after some “improvemets” you can fit toy48.

The standard xhorse flip blades work in these, but i found you have to modify inside the shell a little bit removing some of the plastic in the track where they slide in and then they work perfect.

If you try to fit a toy48,then the secret is shave down the bottom of the blade(make it narrower).
If you pop the shell open it takes like 10 seconds with a utility knife. Pretty cool.

Xhorse Multi Prog Clone Jeep Grand Cherokee GPEC2 in Boot

 Xhorse Multi Prog new user feedback:

GPEC2 clone for Jeep Cherokee %100.

Model: Jeep Grand Cherokee

Year: 2014

ECM: FCA Continental GPEC2

Mode: Boot mode

Will VVDI MLB Tool Calculate Synchro, CS and PIN?

 By using with Xhorse VVDI MLB Tool, we can get the synchro, CS & Pin from the original key for backup. After successful MLB data collection and calculation, this data is available after the dealer key was generated. Detailed steps are as follows:

 

Step1. Identifiaction Key

Please place the key in the device identification area for identification.

 

Step2. Collect Key Data

Open the original car key, connect the original car key PCB as shown in the diagram, and click the collect key data button after connection. It will take about 3-4 minutes. The server takes approximately 10s to calculate. After the calculation is completed, please save the calculation results.

 

Step3. Make Dealer Key

Load the calculation data saved in the step2 and generate dealer keys. Then use VVDI2 or KEY TOOL PLUS for key learning.

Run VVDI2 software and select correspoding vehicle software, i.e Audi
Select Key Learn->MLB Immobilizer System.

Upload data read by MLB tool. Then you will get CS and PIN.

2019 2020 Toyota C-HR AKL Xhorse XM38 Prox Not Working?

 Problem:

2020 Toyota c-hr all keys lost. The customer had purchased one key from dealer. Programmed it with autopropad no problem!! And works fine. Then he asked if I could do a second key and I only had universal xhorse xm38 Toyota so I when and added second key! Now the car took the fob and it show same readings but it only works the remote part not the immo like if the key wasn’t programmed, I’ve already tried messing with the frequency and proximity power nothing changes. The car show 2 fobs programmed but only the oem works, any advice??

Solution:

1).

Frequency issue.

Easy just change the frequency to 314.50 on all frequency options after programming it to the car. Worked for me. Also there are two options for C-HR.

 

2).

The same thing happened to me a couple of days ago Toyota C-HR 2019 generates the remote PCB 0010 of frequency 314 and there was no proximity I increased intensity and tried everything nothing worked, and so as the key was I put it in the device and generates the PCB 0410 frequency 315, after that the key worked proximity and everything perfect I do not know why but I did not have to do again the add key because so no more already worked the key.

 

Better use original key for most of them if it is A9.

 

 

www.vvdishop.com

Xhorse VVDI Prog Failed to Update Software Online?

 Problem:

Tried to update xhorse vvdi prog software online. It failed me and said error “Communication with Server Failed”

Solution:

The vvdi prog online update in software is not working.

Have to contact us to download latest software and run the upgrade.

The current version goes to V5.3.7.

Keep an eye or search our blog for latest vvdi prog software.

For multi prog, you can update software and firmware in software directly.

www.vvdishop.com

Xhorse VVDI Key Tool Max PRO Add 2023 Chevy Camaro Key

This is 2023 Chevrolet Camaro, today I’m gonna use Xhorse VVDI Key Tool Max PRO to program a new smart key for this car. The procedure is simple in 2 steps. Here I have the original key and new key, so let’s get start.

 

If you’ve lost your Camaro smart key or need to set up a new one, this guide is for you. We’ll show you how to use the VVDI Key Tools Max to add a smart key for your Chevy Camaro ZL1 or any other model. It does all keys lost as well. The model is still old platform. This method is a cost-effective alternative to visiting a dealership, and with the right tools, you can do it yourself. The VVDI Key Tool Max Pro is a powerful device that can be used for a wide range of key programming tasks, including Chevrolet smart key programming.

Procedure:

Step1. Read Password

Go to IMMO Programming- Chevrolet- Read Pin Code- Type 4 (BCM)

It is smart key, press Start button once.
Confirm VIN

Key Tool Max PRO shows the password: 7539

Read password successfully.

 

Step2. Add Key

Immo programming >> Chevrolet >> Read PIN code >> Type 4(BCM) >> United States Area >> Camaro >> 2020-2021 >> Smart keys programming >> Start execution >> Add a key

Take keys out of car, place the smart key to be programmed into key slot.

Please enter 4-digit authorizatio code: 7539

Configuring system,
Wait about 10 minutes

Detects keys 2

Press Start button
Ready for key 3

Configuring system
Add key with vvdi key tool max pro successfully.

Turn off the ignition switch.
Click and hold start button for 9 seconds.

Release the button, then click OK to continue.
Click and hold start button to turn on the ignition.
Turn off the ignition switch.

Step on the brake and press the Start to start engine.

Program key is completed.

Test the new key.

www.vvdishop.com