FAQ VVDI MLB Tool MQB48 Adapter

 Here are frequently asked questions of the new Xhorse MQB48 adapter for VVDI MLB Tool.

 

Q: Do you have to replace the replacement chip again when switching back to MLB?

A: This chip is used to replace the original chip in the MLB main unit. After replacement, it will work with the information collector. Discard the original chip; no need to retain it.

 

 

Q:  Need Bonus Points for MQB48 ?

A:  No points required to collect mqb48 immo data.

 

Q:  Is it compatible with Xhorse Key Tool Plus (paired with MLB Tool) or with VVDI2 only?

A: It is compatible with both vvdi2 and key tool plus.

Note: Tablets with a single Type-C port have poor power stability, leading to longer collection times and lower success rates. Strongly recommend collect data via PC.

Q:  Why does it only work with vvdi2 and not with vvdi keytool plus??

A: It does work with both vvdi2 and key tool plus.

 

 

Q: All the same capacitor too Remove?

A: need remove just 1 capacitor and solder back.

 

Q: If I buy a new MLB tool, will it already have a new chip or do I have to replace it as well?

A: Still need to replace the chip.

 

Q:  Why mlb tool doesn’t do mqb48 with vvdi keytool plus???

A: It can work with key tool plus to collect data. But PC is better.

 

 

Q:  With that modification, the MLB will lose guarantee?

A:  No, it will not.

 

Q: Support all mqb48 keys? Prox, bladed, digital cluster?

A: Depends on key type. Check the wiring diagram in software. If the key board matches with the wiring, it can do.

 

Q: I just generate correct remote using app then write data to key?

A: MLB tool just calculate immo data, you still need VVDI2 or VVDI Key Tool Plus to generate dealer key and learn key.

 

Keep updating…