1/02/2019

Program Land Cruiser 2013 All Keys Lost with VVDI Prog and VVDI2

Our customer has successfully programmed a smart key to a Toyota Land Cruiser GXR 2013 Middle East model using VVDI2 and VVDI Prog programmer when all keys have lost.

Step 1: Read EEPROM data
Remove IMMO box under dashboard
land-cruiser-2013-akl-vvdi-prog-1
Desolder IC 93C86 EEPROM chip with a hot gun
land-cruiser-2013-akl-vvdi-prog-2
Solder the EEPROM chip to adapter and connect vvdi prog with laptop
Open vvdi-prog software
land-cruiser-2013-akl-vvdi-prog-3
Select EEPROM/FLASH->ST->M93C86
land-cruiser-2013-akl-vvdi-prog-4
Read and save data. i.e Land crozer 2013.bin 

Step 2: Prepare dealer key
land-cruiser-2013-akl-vvdi-prog-5
Connect Xhorse VVDI2 key programmer with laptop
land-cruiser-2013-akl-vvdi-prog-6
Open VVDI2 software, select Transponder Programmer function
land-cruiser-2013-akl-vvdi-prog-7
Select Immobilizer Data Tool->Asia->Toyota ->Smart Systems->93C66 (86)
land-cruiser-2013-akl-vvdi-prog-8
Load EEPROM Dump just saved by vvdi-prog
Press Make Dealer Key
land-cruiser-2013-akl-vvdi-prog-9
Prepare dealer key success. It can start engine after write back new dump file or leant it to car.
Add another new key need load the new data file.
Press OK to save the new dump file
land-cruiser-2013-akl-vvdi-prog-10
Save new dump file, i.e land crozer 20132.bin


Step 3: Write data back
land-cruiser-2013-akl-vvdi-prog-11
Open new dump file land crozer 20132.bin
land-cruiser-2013-akl-vvdi-prog-12
Press Write
land-cruiser-2013-akl-vvdi-prog-13
Write success.
Now the new key can start vehicle.

land-cruiser-2013-akl-vvdi-prog-14

land-cruiser-2013-akl-vvdi-prog-15
If you need to do Toyota all smart keys lost via OBD, go for Tango or Lonsdor K518, both require emulator key to work with. 

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.