Xhorse Mini OBD Tool Maintenance Functions are Enabled

 Good news for all! Maintenance Functions of Xhorse VVDI MINI OBD TOOL has been activated and enabled to your key tool max.

So far those features are only enabled for KeyTool Max. From the cell phone Mini OBD only serves for immobilizers and collection testing data.

Must update mini obd and key tool max to the latest version.

Check your KEY TOOL MAX for the details.

Xhorse VVDI Mini Key Tool Generate Ford Tourneo 2015 Remote

 Use Xhorse VVDI Mini Key Tool to program a Super Chip for Ford Tourneo 2015 is rather fast and easy to be done in 2 minutes.

You’ll need an original working key & a new key for the operation.

 

Clone Transponder

Transponder clone >> Read transponder

(Put the original working key into Mini Key Tool coil)

Information has read out.

It is transponder 4D+(83) type, Ford/Mazda model, and cloneable.

Clone >> Start clone

(Do not remove the working key)

 

Successful data upload.

Calculate success.

 

Remove the working key, put a Super Chip into Mini Key Tool coil.

Wait to be written…

Successful copy.

Press “Complete”.

 

Now let’s test the new key with Super Chip on it, it can start the engine!

Program Remote

1. Switch the key on then off quickly 4 times or 8 times, finally the key is off, the instrument will make a beep.
2. Click UNLOCK button of remote to be programmed, until the instrument makes a sound, then release the remote.
3. If you need to program more remotes, please repeat step2, click “OK” to exit. After all remotes are completely programmed.
4. Note: complete all operations within 10s.
5. Program remote success.

Done!

 

If you require VVDI Mini Key Tool for other version, please contact us.

https://www.vvdishop.com/

Xhorse VVDI Prog Read Opel Insignia BCM 2M42E

 Confirmed! Xhorse vvdi prog read and write Opel Insignia 2011 year body control module (BCM) mask 2M42E no issue.

 

vvdi prog software does not give wiring diagram. Here’s pinout provided by DK Veteran. Hope it helps.

 

Mask 2M42E
MC9S12XDG128MAL

in VVDI Prog software, you select MCU – MC9S12 – MC9S12XDG128_unnsecured

www.vvdishop.com

Can Xhorse VVDI2 Adapt VW Golf 6 Instrument Cluster?

 Question:

I have a Vw golf 6 2011. Possible to do an instrumental cluster adaption with xhorse vvdi2 device? I have replaced the old instrument and need to place & adapt a new cluster to the vehicle.

Answer:

Yes, you can.

Go to Special Function – K-line Instrument/Immo Box

VVDI2 VAG K-Line Instrument/Immobox Function Explanation

OBD read PIN from K-Line instrument and immobox, read/write EEPROM, change KM etc
Support following types:
1) Instrument Cluster(VDO66,VDO86, Motometer)
2) VW LT immobilizer box
3) VW Gol immobilizer box
4) White immobilizer box – Audi A4/A6/A8
5) Black immobilizer box Siemens 6 PINs HC05 (Immo1)
6) Black immobilizer box Siemens 6 PINs HC05 – 2400 (Immo1)
7) Black immobilizer box Siemens 6 PINs TMS (Immo1)
8) Instrument Cluster – Audi A4 B5 with Board Computer (-1997)
9) Instrument Cluster – Audi A4 B5 without Board Computer (-1997)
10) Instrument Cluster – Audi A8 (-10.1996)
11) Instrument Cluster – Audi A8 (11.1996-)
12) Instrument Cluster – Audi A6 B45 (-1997)
13) Instrument Cluster – Magneti Mareli – Shadow 1
14) Instrument Cluster – Magneti Mareli – Shadow 2 (Passat)
15) Instrument Cluster – Magneti Mareli – Shadow 3 (TT)
16) Instrument Cluster – Magneti Mareli – Direct 1996-2000
17) Instrument Cluster – Magneti Mareli – Direct 2000-
18) Instrument Cluster – Sharan/Galaxy (-2000)
19) Instrument Cluster – Audi A4 BOSCH RB4 Crypto 2001+
20) Instrument Cluster – VW Golf 4 BOSCH RBx
21) Instrument Cluster – Audi A4 BOSCH RBx
22) VW Phaeton/Touareg, Bentley Continental, Porsche Cayenne
23) Instrument Cluster – Audi A4 BOSCH RB8 Crypto 2004+
24) Instrument Cluster – Lamborghini Gallardo -2005
25) Instrument Cluster – Lamborghini Gallardo 2005+

http://blog.vvdishop.com/can-xhorse-vvdi2-do-vw-instrument-cluster-adaption/

Xhorse VVDI Prog V5.0.4 Update Feature

 Xhorse VVDI Prog programmer software update to V5.0.4 on June 1st, 2021.

 

* This version DON’t need update firmware
+ Add PIC18XX25K80, PIC18XX26K80, PIC18XX45K80, PIC18XX46K80, PIC18XX65K80, PIC18XX66K80
options in <2-MCU>->< MICROCHIP-PIC18F>
+ Add MM9Z1I638_UNSECURED, MM9Z1J638_UNSECURED options in <2-MCU>-><MOTOROLA-MC9S12>
+ Add MPC5514, MPC5515,MPC5516, MPC5517 options in<2-MCU>-><MOTOROLA-MPC55XX>
+ Add BENZ-W205_W207_W212 BCM option in <4-IMMOBILIZER>-><BENZ>
+ Add MISTRA-47-PKE-MOUDLE(2017) option in <4-IMMOBILIZER>-><Hyundai>
+ Add 70-CHIP-IMMO-MOUDLE option in<4-IMMOBILIZER>-><KIA>
+ Add HOWO-STRYKER-READ(2019), HOWO-STRYKER-WRITE(2019), options in <5-DASHBOARD>-><HOWO>
+ Add HAVAL-H6PRO-DASHBOARD(2017) option in <5-DASHBOARD>-><Great Wall>
+ Add Bora(2015-2020)(D70F3423), JETTA(2015-2020)(D70F3423), SANTANA(2015-2020)(D70F3423), C-TREK(2015-2020)(D70F3423)
options in <5-DASHBOARD>-><VOLKSWAGEN>
+ Add Lamando EPS(2018-)option in <8-OTHER>-><VOLKSWAGEN>

 

Free download vvdi-prog v5.0.4 software

https://mega.nz/file/FVV1XKaI#7679O9vDkuct_LyC1LOtqvlGQD-MAzQMzUiaCUP5VIA/

VVDI Key Tool Max ID48 96bit Copy Asks No Bonus Points?

 Problem:

I had a problem when performing ID48 96bit online calculation with the xhorse vvdi key tool max. I have combined device with my key tool plus, mini key tool as well.  Already collected 1425 points before cloning. Why it still says the device don’t have enough bonus points for calculation.

Solution:

From the last picture we can see you have 1400 mb points, 4 paid tokens, and 25 bonus points from remote generation.

The MB bonus points cannot be used on ID48 96bit cloning. Only can be used on MB calculation.

If you don’t have enough points, you can recharge token here.

https://www.vvdishop.com/wholesale/xhorse-vvdi-id48-token.html

Xhorse VVDI2 Exchange BMW FEM/BDC Module

 The answer is Yes. BMW F chassis FEM/BDC module should be exchanged in case it was damaged due to misoperation when matching keys or repairing. Using Xhorse VVDI2 to replace FEM/BDC module directly will be much faster and economical.

 

How to exchange BMW FEM/BDC by VVDI2?

 

Step1. Preparation

Find a same year & model of FEM/BDC as the damaged one, new or secondhand is workable.

 

FEM/BDC module requires programming before exchange, the way to program new module is same as key matching.

 

Connect FEM/BDC with VVDI2 programmer on car/ bench for programming.

(It will prompt if the FEM/BDC should be programmed, if not, please go to step3 “Exchange FEM/BDC” directly)

Step2. Programming FEM/BDC System

FEM/BDC key learn >> Get key info >> Programming FEM/BDC system

 

Follow the notes to operate step1 – step5:

Backup coding >> Prepare service EEPROM file >> Programming >> Restore original EEPROM file >> Restore coding

 

Step3. Exchange FEM/BDC with VVDI2 BMW

Go to “Exchange FEM/BDC” after programming completed.

 

Read FEM/BDC data >> Revise 3 options including:

1. VIN, the VIN of damaged FEM/BDC;
2. Frequency(The remote will not work if selecting wrong frequency);
3. Key/CAS security key, fill in the original vehicle ISN(it can be acquired by reading engine data)

Change FEM/BDC ISN >> Yes >> Has a working key or not? No(select according to situation) >> Input the original vehicle ISN(the damaged one, no secondhand FEM/BDC ISN) >> Next >> Write FEM/BDC data

After writing data completed, FEM/BDC exchange match has done!

 

In general, same model & year of FEM/BDC can work normally after replacement.

If there were error codes, please use professional tool to do programming and coding.

 

Note: Some BMW like MINI or X1 cannot turn on ignition & dashboard after FEM/BDC replacement, that is because the directional lock is not synchronized. Just disassemble the directional lock to revise data for synchronization, it can work as normal.

 

https://www.vvdishop.com/

https://www.vvdishop.com/service/exchange-bmw-fem-bdc-module-with-xhorse-vvdi2.html

Xhorse Smart Key Box User Manual

 What’s Xhorse Smart Key Box?

It is an adapter that can be used to access a vehicle using a mobile phone app via Bluetooth connection.  With this adapter, you can add Bluetooth Connectivity to the Central Locking System / Keyless Entry System of any vehicle that you can configure an Xhorse Universal Remote to operate.

 

This adapter will allow wireless(via bluetooth) locking, unlocking, and remote start.  Keep in mind that this adapter does not add any of these features to the vehicle.  In order for this adapter to wirelessly lock, unlock, or remotely start the vehicle, these features have to already be functioning in the vehicle before the Xhorse Smart Key Box is installed.

Compatibilities:

A maximum of 6 mobile phones and 6 smart keys are supported by this device.

 

What vvdi tools can be used to program remote control?

vvdi mini key tool, vvdi2, vvdi key tool max and vvdi key tool plus

 

How to use Xhorse smart key box?

1. Soldering the circuit board
2. Key learning
3. Install smart key box
4. Test

Step 1: soldering the key diagnonally

Soldering the original key into smart key box

check the wiring diagram

Step 2:

Long press the learning key, the indicator light up to enter the learning mode
First learn the mobile phone and then press any key to learn the remote control
Long press the learning key, the indicator goes out to exit the learning mode

 

Step 3: Install smart key box 

if you use Bluetooth to control the ar only, no need to match more remotes, no need to install HF and LF antenna
Insert the LF antenna (long) into Port 1
Insert the LF antenna (long) into Port 1
Insert the HF antenna into the HF port

Connect one end of the power supply cable to smart key box
connect the signal pin in the OBD interface or connect the ACC signal line in the fuse box according to the model reference

Now test on car. Support panic and open trunk.

Scan QR code to check for information of smart key box.

https://www.youtube.com/watch?v=LnBk2SjxzCc