Xhorse VVDI Prog V5.1.5 Software Free Download

 Xhorse vvdi prog programmer software update to V5.1.5 on May 30th, 2022.

 

VVDIprog v5.1.5 (2022-05-30)
* Fixed some option diagrams in  <2-MCU>-><MICROCHIP-PIC18F>
+ Add  D70F3187, D70F3483F1 options in <2-MCU>-><RENESAS-V850>
+ Add PASSAT option in <5-DASHBOARD>-><FOTON>
+ Add AUAHAN QIYUE option in <7-AIRBAG>-><CHANGAN>
+ Add DISCOVERY4 SRS(SECURED) option in <7-AIRBAG>-><LandRover>
+ Add AUDI EPS(D70F3483F1) option in <8-OHTER>-><AUDI>
+ Add ML350 AC PANEL,
BENZ 166 FRONT SAM MODULE,
BENZ 166 SEAT MODULE,
BENZ S350 PLGM(2010),
BENZ W166 EPS(D70F3483),
BENZ W166 EPS(D70F3485)
options in
<8-OTHER>-><BENZ>
+ Add BMW G38 EPS(D70F3508) option in <8-OHTER>-><BMW>
+ Add CADILLAC EPS(D70F3485) option in <8-OHTER>-><CADILLAC>
+ Add CAVALIER EPS(D70F3506) option in <8-OHTER>-><CHEVROLET>
+ Add 2014 RUIJIE SKYLIGHT MOTOR  option in <8-OTHER>-><Ford>
+ Add Lincoln MKX EPS(D70F3506) option in <8-OHTER>-><Lincoln>
+ Add CAMRY AC COMPUTER option in <8-OTHER>-><TOYOTA>

 

Free download vvdi prog v5.1.5

https://we.tl/t-n20qELiwG4

Mercedes Benz EIS/EZS Pinouts for Table Connection

 Here are all Mercedes-Benz EIS/EZS pinouts for table connection and test.  You can read EZS EIS data with xhorse vvdi mb tool, vvdi key tool plus, cgdi mb etc using EIS/EZS test cables or full protocol jumper cable.

 

W169 W211 W209

W202 W208 W210

W203 W463 W639

W204 W207 W212

W212 new W246 W166 EZS

W215 W220 W230

W221 new type

W221 old type

W639 new type

W906

W164 NEC New

W164 NEC Old

W166 W246

W246 one plug

https://www.vvdishop.com/service/benz-eis-ezs-pinouts-for-table-connection.html

Godiag Jumper Replace Benz EZS EIS Cable for VVDI MB

 VVDISHOP.COM is rolling out a new godiag full protocol jumper cable set to replace the Benz EIS/EZS test cables for xhorse vvdi mb tool, vvdi key tool plus for EZS/EIS data reading.

The universal jumper cable set is much cheaper and easier to use than regular EIS/EZS cables.

Follow Benz EZS/EIS table connection pinouts to connect EIS with godiag jumper

Connection diagram example:

The advantages of Godiag jumper comparing Benz EIS/EZS cable set:

• 1. Cheaper, $29.99 only
• 2. Easier to use and connect
• 2. Multifunctional.

The godiag jumper can be used with vvdi2/vvdi bimtool to read VAG Audi engine ECU data and PIN on table as well.

Example: vvdi2 read Audi A6 Simos 6.3 ECU and PIN via Godiag jumper.

https://youtube.com/shorts/qXqKT9u9xXE

The jumper adapter can also be used as breakout tricore cable for mpps, kess v2, fgtech etc to read ECUs/TCUs no opening ECU.

Xhorse VVDI2 Adds VW Eurovan 24C04 Key via Dump

 2002 VW Eurovan does anybody have instruction on how to add a key (ID44 transponder) with xhorse vvdi2 vag?

Solution:

Remove immobilizer behind left side of the instrument cluster, remove EEPROM 24c04, read with vvdi prog programmer, load into vvdi2 key by file and program a new chip or clone an existing key position with a vvdi super chip xt27.

Will VVDI PROG Read & Write MOTO HC11 Series Chips?

 The answer is yes. To successfully read old Motorola HC11 series chips, ETL programmer was a must before. But now, it’s difficult to find one on market. This may cause trouble when reading old Land Rover with HC11 chips. Fortunately, after engineer’s correction and upgrade, Xhorse VVDI PROG is able to read & write HC11 series chips!

 

How to read MOTO HC11 chips with VVDI PROG?

1. Check out the standard code via bitmask on CPU.

For example, the bitmask on CPU is 0G10V. We can get its standard code MC68HC11P2 via MOTO Bitmask List.

2. Select correct options in VVDI PROG Such as

Brand: Motorola MC68HC(7)11 Series

Chip: MC68HC11P2

 

3. Need to remove CPU from circuit board to solder with MCU Reflash Cable. It’s possible to use an appropriate adapter as well if having.

This function can help locksmiths to solve data reading & writing problems for some old cars. No more to buy additional programmers.

 

www.vvdishop.com

Program Mercedes S430 V8 W220 Key with VVDI MB Tool

 New test report: Key programmer and key copy Mercedes-Benz S-Class S430 V8 W220 done by Xhorse VVDI Prog and VVDI MB Tool.

315MHZ, using xhorse mb key 3+1 panic key.

Read EIS data with vvdi prog.

Write key with VVDI MB.

Can Xhorse VVDI Mini Key Tool Clone MQB Key?

 Question:

I am looking to buy the xhorse vvdi mini key tool, but before I pull the trigger I need to know if this thing will work with the car. I have Seat Leon MK3 2014 BCM MQBAB M H14 with only one key which I believe is not original. Will I be able to add/clone the key with this tool and if so which key should I get?

Answer and Solution:

MQB can not be cloned at all.

Xhorse mini keytool can clone immobilizers but id49/48 Mqb cannot be cloned. You can generate an appropriate key model but you have to add it after obd. Lonsdor, autel, smart pro, obd star can do it.

This can be programmed, first you need to order a blank mqb and with Xhorse to generate the exact model on mqb after that with autel Londsor etc you can make it.

Xhorse MQB smart remote

Xhorse MQB super remote

Xhorse VVDI2 Read BMW MSD80 ISN Success

 Can xhorse vvdi2 read ISN from a BMW MSD80 DME?  This is a frequently asked question by users.

 

Yes, it can.

 

Here’s the guide on reading MSD80 ISN with vvdi2.

Check msd80 vvdi2 wiring diagram

set up bench connection with vvdi2 and ecu, provide 13.5V power supply

Let’s go to BMW
Go to Key Learn function- ECU/CAS ISN-MSD80
Read ECU ISN

if you don’t want to mess with bmw, you gonna wait patiently

vvdi2 bmw reads the engine ISN and VIN, read full flashing completed.

Save data.

Change MSD80 VIN requires complete flashing. If vvdi2 will read complete flashing, it can change the vin.

 

https://www.vvdishop.com/service/read-bmw-msd80-isn-with-xhorse-vvdi2.html

Xhorse XM38 Smart Key Error Code 9B Solution

  Question:

I try to generate Toyota Camry 8A proximity (P4 A9) with the new Xhorse XM38 smart key and key tool max. It failed me. Anyone can help me with the calculation failed error code 9B?

Solution:

The error means your XM38 proximity cannot match your device version.

You properly got the Chinese version XM38 key but your device is the Global version.

Do choose the global version XM38 smart key (English) here

https://www.vvdishop.com/wholesale/xhorse-xsto01en-toyota-xm38-smart-key.html