How to Fix Xhorse VVDI2 Device Negative Response?

 Problem: 

Xhorse vvdi2 device is not working. ERROR: VVDI2 device negative response or no response.

Solution:

There is something wrong with your vvdi2.

Need a factory repair.

Xhorse Multi Prog VW R7F701402 Chip Configuration Failed?

 Problem:

Has anyone successfully read mqb r7f701402 golf7 2020 cluster with Xhorse multi prog? I did everything as they said. But multiprog gives error “Chip configuration failed”.

Solution:

This instrument cluster is MQB49.

Detect original key with vvdi key tool and check it is MQB48 or MQB49 key.

If it is MQB49, multi prog will not read cluster and decode immo data.

Only 5A cluster for immo data decoding
5C only for KM. Cannot do immo data.
Mqb 49 is not decoded by any machine.

 

www.vvdishop.com

Xhorse Multi Prog Database V47 Adds Benz D70F3421 Cluster

 Xhorse Multi Prog released new database version V47 on December, 24th, 2024.

 

2024-12-24
* Updated TMS320F28x series JTAG option wiring diagram, fixed unstable read problem
+ Added M29FXXX series unprotect block function
+ Immobilizer->Buick->Buick->Added LaCrosse BCM (2021) (R7F701053) option
+ Immobilizer->Ford->Ford series added Mondeo BCM (R7F701053) option
+ Immobilizer->Mercedes->Mercedes added Vito 638 IMMO box option
+ Instrument->Dongfeng->Dongfeng added Dongfeng Huashen DV3 LCD instrument (2023) option
+ Instrument->Volkswagen->Volkswagen  added Volkswagen 4th generation instrument (D70F3425)-LOCK-read

Volkswagen 4th generation instrument (D70F3425)-LOCK-write option
+ Instrument->Mercedes->Mercedes added
Mercedes-Benz 204-212 instrument (D70F3421)-LOCK option
+ Engine computer->Other->Added in Other CNG(2010-2014) option
+ Other->Mercedes-Benz->Added in Mercedes-Benz A180-steering column, Mercedes-Benz audio HU55 module (D70F4018)-LOCK_read option
+ Other->Dodge->Added in Dodge Dodge Journey door control module (D70F3373) option
+ Other->SAIC->Added in SAIC Group Roewe AS22 PEPS control module option
+ Other->BMW->Added in BMW BMW X1 seat computer, BMW 3 Series GT oil pump (2013)(MC9S12XEG128)
+ MCU->Added in GigaDevice
GD32F4xx,
GD32F1x0,
GD32F10x,
GD32F20 and other series, a total of 498 options added

Connect VW Golf MK7 Cluster with Xhorse MQB XNDP80 Adapter

 Tips to connect Xhorse MQB XDNP80 solder free adapter with VW Golf mk7 dashboard 5G0920860A.

VW Golf mk7 dash 5G0920860A pin point of GND is NOT OK with xhorse 80 adapter, misaligned about 2mm.

The problem was the ground pin was a bit off and couldn’t touch the exact point.

 

Solution:

Manually solder and connect to GND with adapter, read no problem. D6 pin on adapter not necessary for read. Don’t forget 12v.

How to Disassemble Xhorse XM38 Supercar Smart Key?

 This is a tutorial on how to disassemble Xhorse XM38 Supercar Style Universal Smart Key step by step.

 

Disassembly Procedure

1. Press the button to remove the Supercar key blank base.

2. Locate the pry spot and gently open along the groove.

 

3. Remove the ramaining parts in sequence.

4. Assemble XM38 Supercar Key back together.

 

www.vvdishop.com

Xhorse Multi Prog Clone Jeep 2021 GPEC3 ECM

 User tested report: Xhorse Multi Prog cloned Jeep Compass 2021 GPEC3 ECM/ECU/PCM successfully and FC200 failed.

Select Jeep- Compass- FCA Continental GPEC3

Check boot mode wiring diagram

Connect multi prog programmer with ECM via ECU adapter. Pay attention to the boot pins.

We have backed up the original ECM eeprom and flash.

Upload original EEPROM and write to the donor ECM.

Write eeprom successfully. Then write flash to the donor ECM until completed.

GPEC3 cloning is done.

 

www.vvdishop.com

How to Get Free MB Tokens for Xhorse?

 How to Get Free MB Tokens for VVDI MB or Key Tool Plus?

Combining the key cutting machine serial number and the device serial number allows you to earn up to 2 free MB tokens per day!

NOTE:
*The tokens are not cumulative and are refreshed daily.
*Both types of devices (key cutting machine + VVDI KEY TOOL PLUS/VVDI MB TOOL) must be combined.
*The serial number of the device needs to be sent to your local dealer for uploading to the system for combining.
*Combining Panda Series Key Cutting Machines cannot get tokens.

Xhorse MVCI Pro V2.1.9 Adds Nissan Volvo Benz Drivers

 Great News! The Xhorse MVCI PRO J2534 now supports more diagnostic software brands like Benz, Maybach, Volvo, Renault and more, all tested on real vehicles for top reliability. Start solving diagnostic challenges for more vehicle brands today!

Software version V2.1.9
Firmware version: V1.3.4

Newly Supported Diagnostic Sofware Brands

Benz
Volvo
Nissan
Peugeot
Chevrolet Cadillac

Compatible brands and software (keep updating)

Mercedes Benz, Maybach, Smart Xentry
Volvo VIDA
Nissan Consult III Plus
Peugeot Diagbox
Renault CLIP
GM Tech2win/GDS2/RDS
Toyota Lexus Techstrea,
Honda Acura HDS
Subaru SSM-IV
Ford IDS FDRS
Mazda IDS

Xhorse Multi Prog 9S12XDT256 Chip Verification Failed?

 Problem:

Xhorse Multi prog At first it worked well with Flash and EEPROM of 9s12XDT256 SsangYong Tivoli, but now the following chip data verification failed error occurs.

Solution:

There are unsecured and secured options.

Choose 9s12XDT256 secured option and read again.

www.vvdishop.com

Xhorse Multi Prog Fails to Unlock VW D70F3426 Solution

 Problem:

I read JC dash from VW golf 7 cluster mcu D70F3426 with Xhorse multi prog, not possible unlock 70f3426, detection is ok but not unlock.

Solution:

Power on the Multi standard adapter to start up the programmer.

You might have this problem:
And also 12V power directly on the adapter, via connector.

Been there, found out the hard way.

 

 

Feedback:

Unlock mcu in second as said above.

Xhorse VVDI2 or AVDI to Program Audi A3 Micronas Key?

 Question:

Having a few too many issues reading this Audi A3 P8 Micronas cluster on bench with Abrites + ZN060 Micronas cluster adapter. Maybe VVDI2 would be better? is it possible to wake up this cluster on bench with VVDI2?

 

Here is the clue.

A3 Micronas with blue connector is not possible with pogo pin to service mode and read immo data, you will need to service mode by eeprom.

A3 micronas cluster with blue connector has no support for reading immo data by ANY tool.

You will have to read EEPROM(24c64 from memory),write modified eeprom on bench, replace cluster in car, write back original by obd and then read immo data by OBD with a supporting tool. Xhorse VVDI2/VVDI Key Tool Plus can do this from start to finish.

There’s plenty of guides on how to do TP2 service mode by EEPROM online, but the xhorse tools mostly automate it, just feed the file in and write back the result file then continue to write back by obd/read immo data.

 

 

24c32 in this one.  People have done a few this way with Key tool plus and VVDI Prog. Better have the cluster on the bench and try to avoid connecting the cluster in the car and lose the ABS coding.

 

Feedback:

Well, did the needed… and now it works.

Pin 1 +12V (30)
Pin 4 GND (31)
Pin 5 +12V (15)

Pin 29 CAN H
Pin 30 CAN L

Connected in bench and VVDI 2 did it’s magic.

 

Abrites software is busted for OBD reading on 8P platform A3. It was reported to them several times and that was quite some time ago but they obviously don’t have any interest in fixing it. VVDI does the job for me.

 

www.vvdishop.com

Xhorse VVDI2 Small Screen “Updating” Solution

 Problem:

Pulled Xhorse VVDI2 out of box this morning plugged it in and the small screen shows updating icon in Chinese. Any idea?

Possible reason:

You unplugged the USB cable before the upgrade was fully completed last time. So it shows in upgrade status.

 

Solution:

1.Update VVDI2 firmware via Xhorse Upgrade kit on laptop.

2. Change USB port or another laptop, try again. If all fails, the device may need a factory repair.

 

www.vvdishop.com