2013 Jetta All Keys Lost no Proximity. Can this be done without Vag OBD helper? Through OBD with VVDI2? Thank you in advance.
User working experience:
Just did one with NEC cluster. My first one. Key learn by 4th Immo – picked Jetta with nec xxxxx, none of the other types. Read Immo information. Saved bin file, made transponder out of superchip. Used an Xhorse remote and turned ignition on, then added a new OEM key.
You gotta read it then put cluster in service mode. It will give you a service mode dump. Then take that. Write to chip then you can put back in car or do all on bench take original file write back read immo data then make dealer key then add key. It gives you specific instructions once you click service mode on correct 4th immo operation.
Choose MINI OBD menu Connect with Mini OBD via Bluetooth Select IMMO Programming->Kia->Select from model->Generate market->Picanto (TA)->2012-2017->Remote Programming
Read programming description Loading
Select Remote matching
Insert key turn on and turn off then remove key
Press Unlock or Lock button on wanted remotes for 1 second
1st key have been programmed successfully. Press Yes to program 2nd remote
Press Unlock or Lock button on 2nd remotes for 1 second
2nd key have been programmed successfully. 2 remotes have been programmed. Press No for finish.
I have installed IDS V108 on Vmware to work with my Ford VCM II. When I run the software, I get the application error 27076 message “Ghost has detected corruption in the image file. Please perform an integrity check on the image…” is shown as below.
The possible cause:
Maybe there is something wrong with the file.
The solution:
Uninstall the current software and install by the following download link. https://share.weiyun.com/5S508ie
Password: ynd37s
Security: Yes, it has been tested 100% ok by obdiitool.co.uk engineer.
Operating system: You’d better install Ford IDS V108 on Win7
Recommend WIN7 32bit system download link: https://share.weiyun.com/59Noy7p
Password: 0awk7b
Computer operating system requirements:
1.If your computer hard drive only has one partition, please prepare a 16GB U flash drive
2.If has 2 partitions, please unzip the software into any other partition except disk C.
Guide to install Ford IDS V108 software for VCM2:
Extract Ford 108 software, delete the redundant files
Click on GHOST 8.0 to one key recovery
Restart computer
Click on Ford extending programming
Find VCI Manager (Ford-VCM-II) to install
If it prompts “PC software initialization error (getmoduletype), please go to Computer-> program files-> Ford motor company-> IDS-> Runtime-> install3rdparty-> ETAS-> setup
Install Bosch VCI Manager
When install successfully, run VCI Manager (Ford-VCM-II)
Connect VCMII to computer as below
Go to computer management-> Device manager->Network adapters to check whether the device connect successfully
Make sure the Internet connection is normal
Then you can run IDS 108 software
For the detailed operating steps, please watch the related video:
